We no longer need it as we use the more modern job events.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patches removed the job submission for the handler so now even
the handler itself can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now work with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration code was using few blockdev bits before blockdev was
fully integrated to allow TLS with NBD.
Since we now always use blockdev we can remove the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer need the arguments which were conditionally filled based on
presence of the QEMU_CAPS_BLOCKDEV feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of early iterations of the gluster driver 'tcp' was used instead
of 'inet' and 'socket' instead of 'path' for unix sockets. All of this
can be now removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI is always set we can remove the
code which handled cases when the capability was not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property of 'scsi_disk' was added in qemu-4.0 and it's
unconditionally present, thus we can now always assume its presence.
Update some fake-caps test which didn't yet assert the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which fills 'qomName' does so only when the blockdev capability
is enabled so we don't have to check it separately as it can be only
non-NULL when blockdev is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup of the code to always assume support for QEMU_CAPS_BLOCKDEV
will not be simple, so for now we hardcode the support and the code will
be cleaned up gradually.
We also disallow users to clear the flags via the namespace property or
qemu.conf configuration.
The change to the PPC64 test data originates from the fact that the
capability dump is not from the release version but is lacking one of
the necessary flags to enable -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
luks-encrypted QCOW2 files were introduced in qemu-2.6 unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Discard and zero-detection for disk sources is supported since qemu-2.1
so we can always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'debug' level for the gluster driver was added in qemu-2.8
unconditionally so libvirt can always assume it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active block commit is supported since qemu-2.0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active layer block commit is unconditionally supported since qemu-2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command was added in qemu-2.1 and doesn't have
any dependencies. We use it as witness for using blockjobs with relative
backing paths. Always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now only support qemu versions which already have the capability so
we can remove this now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Per [1] the Debian 10 reaches EOL in August of 2022. This allows us to
bump the minimum supported qemu version to qemu-4.2 which will also
allow us to do significant cleanups.
This commit bumps the minimum qemu verison and updates the corresponding
docs.
[1]: https://wiki.debian.org/DebianReleases
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't check the return value and actually doesn't have
one either. Remove the return value and adjust return statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we started handling the monitor EOF event inside a job any code
which uses virDomainObjWait would no longer properly abort in case when
the VM crashed during the wait.
This is because virDomainObjWait uses virDomainObjIsActive which checks
'vm->def->id' to see if the VM is still active. Unfortunately the domain
id is cleared in qemuProcessStop which is run only inside the job.
To fix this we can use the 'beingDestroyed' flag stored in the VM
private data which is set to true around the time when the condition is
signalled.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Fixes: 8c9ff9960b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to do this so that we can mock it in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
We need this callback structure for qemu driver only, but it
makes more sense to include it in the virDomainJobObj in case of
other future additions than as a parameter of a beginJob
functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new variable maxQueuedJobs into the job object
as it is the last hypervisor-based part of the begin job. Since
this patch, it will not be necessary to propagate driver
structure into the job functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It makes sense to move this to other hypervisor-based functions
into the private job callback structure to make begin job
general.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The query-cpus-fast command was introduced in 2.12, therefore
query-cpus is never used on supported versions of QEMU. Remove
the logic to parse its output, as well as the parameters to
choose between the two commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch moves qemuDomainTrackJob() as virDomainTrackJob() into
hypervisor because it is called in begin job and end job
functions that will be generalized in the following series.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjClearJob() as
virDomainObjClearJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjPreserveJob() as
virDomainObjPreserveJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It does not make sense to propagate virDomainObj and get
qemuDomainObjPrivate from it, when it is already accessible in
the only function qemuDomainObjPreserveJob() is called from. That
being said, we can also propagate virDomainJobObj directly and
avoid using qemu private structure.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAsyncJob() as
virDomainObjResetAsyncJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAgentJob() as
virDomainObjResetAgentJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After QEMU is killed in qemuProcessStop() its mount namespace
doesn't exist anymore, because it was the only process running
there. Thus we should clear our internal flag that the domain has
namespace enabled so that seclabel restore code does not try to
enter it. We do the same in qemuProcessHandleMonitorEOF() but
when it is us, who decides to kill QEMU rather than QEMU quitting
we haven't seen EOF by the time qemuProcessStop() is called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Supported TPM versions are reported in domain capabilities. These
are used already to validate TPM type and model, but not TPM
version. This is suboptimal, because otherwise we leave users to
meet the error when starting a guest and libvirt spawns swtpm
binary which in turn reports an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When we call qemuDomainSetMaxMemLock to reset memory locking limit back
to its original value the domain can already be stopped (for example
after the domain shuts down during migration) in which case it does not
make sense to set any limit. Doing so can even be harmful as we may end
up setting the limit for the daemon itself as the PID is 0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When resetting private data after stopping QEMU process we should also
reset the original memory locking limit (both normal and pre-migration)
as they are not relevant anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemuDomainDefCPUPostParse() does a bit more than filling in
missing info. It also validates CPU cache configuration. Move
that code into qemuValidateDomainDefCpu() where the code fits
better.
And since I need to fix indentation of existing code in
qemuValidateDomainDefCpu(), I'm taking this opportunity and move
error messages onto single line. Interestingly, this uncovers a
bug we have in sc_prohibit_diagnostic_without_format syntax-check
rule, because previously a virReportError() with a message
spawned over three lines was not caught but not it is. But
trying to understand that regex is a job for another time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Directly check the return value of 'connect'. Unfortunately we can't
remove it as we have to undo auto-closing of the socket on success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers now pass false for 'retry' we are guaranteed to have a
monitor socket present. This means that the retry code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In 'qemuProcessQMPLaunch' qemu is very specifically launched using it's
internal '-daemonize' flag (see comment in the function) to ensure that
the monitor socket is ready and opened prior to attempting the monitor
connection.
This means we don't have to retry the connection to the monitor in
qemuMonitorOpen as the socket will be already there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'timeout' argument is used by 'qemuMonitorOpenUnix' only when the
'retry' argument is true. The callers of 'qemuMonitorOpen' only pass '0'
for timeout when they call it with 'retry' true and use other values
when 'retry' is false and thus ignored.
This means we can remove the argument and simply have it set to the
default value of QEMU_DEFAULT_MONITOR_WAIT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Both callers pass 'false' as the argument via a variable which is not
modified. Remove the argument and pass 'false' directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Since functions virQEMUCapsFillDomainFeatureSEVCaps() and
virQEMUCapsSEVInfoCopy() essentially do the same thing it does
not make sense to have the code duplicated. This patch replaces
the relevant code in the first function with the function call to
the second one.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch moves qemuDomainObjResetJob() as
virDomainObjResetJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
After previous cleanup, the qemuDomainDefTPMsPostParse() function
does nothing more than validates TPM devices. Therefore, it
should live in qemu_validate.c instead of qemu_domain.c. Move it
there and rename to reflect the fact that the function is doing
validation instead of PostParsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the qemuDomainDefPostParse() we aim to fill in top level
values, which require overall view of domain, or those parts of
configuration that are not a device in domain XML (e.g. vCPUs).
However, inside of qemuDomainDefTPMsPostParse(), which is called
from aforementioned function, we do two tings:
1) fill in missing info (TPM version), and
2) validate TPM definition.
Now, if 1) is moved into qemuDomainTPMDefPostParse() (the device
post parse callback), then 2) can be moved into validation step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When parsing a TPM device plenty of virXMLPropString() +
enum2int() combos are used. These can be replaced with
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainTPMDef structure has 'version' member, which is a
bit misplaced. It's only emulator type of TPM that can have a
version, even our documentation says so:
``version``
The ``version`` attribute indicates the version of the TPM. This attribute
only works with the ``emulator`` backend. The following versions are
supported:
Therefore, move the member into that part of union that's
covering emulated TPM devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's no need to skip over ENOENT error in
qemuCgroupAllowDevicesPaths(). The path must exists when
qemuCgroupAllowDevicePath() is called because of virFileExists()
check done right above.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate memory related arguments into
qemuAppendDomainMemoryMachineParams(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which arguments are generated is changed.
But there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate arguments based on
domainDef->features[] into
qemuAppendDomainFeaturesMachineParam(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which features are generated is changed. But
there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, virJSONValueObjectHasKey() can return one of three
values:
-1 if passed object type is not VIR_JSON_TYPE_OBJECT,
0 if the key is not present, and finally
1 if the key is present.
But, neither of callers is interested in the -1 case. In fact,
some callers call this function treating -1 and 1 cases the same.
Therefore, make the function return just true/false and fix few
callers that explicitly checked for == 1 case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my recent comnmit v8.5.0-188-gc47f1abb81 I accidentally moved
qemuMigrationParamsResetTLS after qemuDomainObjEnterMonitorAsync not
noticing qemuMigrationParamsResetTLS will try to enter the monitor
again. The second call will time out and return with a domain object
locked. But we're still in monitor section and the object should be
unlocked which means qemuDomainObjExitMonitor will deadlock trying to
lock it again.
Fixes: c47f1abb81
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This call to qemuMigrationSrcIsAllowedHostdev() (which does a
hardcoded fail of the migration if there is any PCI or mdev hostdev
device in the domain) while doing the destination side of migration
prep was found once the call to that same function was removed from
the source side migration prep (commit 25883cd5).
According to jdenemar, for the V2 migration protocol, prep of the
destination is the first step, so this *was* the proper place to do
the check, but for V3 migration this is in a way redundant (since we
will have already done the check on the source side (updated by
25883cd5 to query QEMU rather than do a hardcoded fail)).
Of course it's possible that the source could support migration of a
particular VFIO device, but the destination doesn't. But the current
check on the destination side is worthless even in that case, since it
is just *always* failing rather than querying QEMU; and QEMU can't be
queried at the point where the destination check is happening, since
it isn't yet running.
Anyway QEMU should complain when it's started if it's going to fail,
so removing this check should just move the failure to happen a bit
later. So the best solution to this problem is to simply remove the
hardcoded check/fail from qemuMigrationDstPrepareFresh() and rely on
QEMU to fail if it needs to.
Fixes: 25883cd5f0
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit v8.4.0-287-gd4d3bb8130 tried to make sure the original
pre-migration memory locking limit is restored at the end of migration,
but it missed the case when libvirt daemon is restarted during
migration which needs to be aborted on reconnect.
And if this was not enough, I forgot to actually save the status XML
after setting the field in priv (in the commit mentioned above and also
in v8.4.0-291-gd375993ab3).
https://bugzilla.redhat.com/show_bug.cgi?id=2107424
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function would fail to release the job in case
qemuMigrationSrcIsAllowed failed.
Fixes v8.5.0-157-g69e0e33873
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When the <loader stateless='yes'/> attribute is set, the QEMU driver
needs to do three things
- Avoid looking for an NVRAM template
- Avoid auto-populating an <nvram/> path
- Find firmware descriptors with mode=stateless instead of mode=split
Note, the first thing happens automatically when we solve the second
thing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Because qemuMigrationParamsReset used to call qemuMigrationParamsApply
for resetting migration capabilities and parameters, it did not work
well since commit v5.1.0-83-ga1dec315c9 which only allowed capabilities
to be set from an async job. However, when reconnecting to running
domains after daemon restart we do not have an async job. Thus the
capabilities were not properly reset in case the daemon was restarted
during an ongoing migration. We need to avoid calling
qemuMigrationParamsApply to make sure both parameters and capabilities
can be reset by a normal job.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuMigrationParamsApply restricts when capabilities can be set, but
this is not useful in all cases. Let's create new helpers for setting
migration capabilities and parameters which can be reused in more places
without the restriction.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We keep original values of migration parameters so that we can restore
them at the end of migration to make sure later migration does not use
some random values. However, this does not really work when libvirt
daemon is restarted on the source host because we failed to explicitly
save the status XML after getting the migration parameters from QEMU.
Actually it might work if the status XML is written later for some other
reason such as domain state change, but that's not how it should work.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_ENUM_IMPL macros directly above them list one string per line.
Use the same also for qemuMonitorMigrationStatus and
qemuMonitorVMStatus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that we can only do this for intel-iommu and virtio-iommu,
which are configured using -device; smmuv3 is configured using
a machine type property, so there's no room on the command line
for an alias in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2108483
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When hotplugging a chardev, Libvirt opens corresponding
file/binds to a socket/does whatever necessary to obtain an FD
that is later passed to QEMU. However, due to wrong placement of
the function that does all of this
(qemuProcessPrepareHostBackendChardevHotplug()) it may happen
that a file is set seclabel on, only to be unlink()-ed and
created again (the former is done by
qemuSecuritySetChardevLabel(), the latter by aforementioned
function). The unlink()-ing is done for UNIX sockets with
mode='bind' and happens inside qemuOpenChrChardevUNIXSocket().
However, these steps can be swapped simply.
Fixes: ad81aa8ad0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When hotplugging a chardev, Libvirt opens corresponding
file/binds to a socket/does whatever necessary to obtain an FD
that is later passed to QEMU. However, if something fails after
the FDs were transferred to QEMU and before chardev is actually
added via monitor, these FDs are never closed in QEMU. This is
rather suboptimal.
Fixes: 15bdced9b3
Fixes: ad81aa8ad0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
