Commit Graph

525 Commits

Author SHA1 Message Date
Ján Tomko
8728a78e90 Always add 'console' matching the 'serial' device
We have been formatting the first serial device also
as a console device, but only if there were no other consoles.

If there is a <serial> device present in the XML, but no serial
<console>, or if there isn't any <console> at all but the domain
definition hasn't gone through a parse->format->parse round-trip,
the <console> device would not be formatted.

Change the code to always add the stub device for the first
serial device.

Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1089914
2015-06-04 10:04:44 +02:00
Andrea Bolognani
778c56f000 qemu: Automatically add <panic> element for pSeries guests.
The guest firmware provides the same functionality as the pvpanic
device, and the relevant element should always be present in the
domain XML to reflect this fact, so add it after parsing the
definition if it wasn't there already.
2015-06-01 06:44:37 -04:00
Andrea Bolognani
7bd769e0ab qemu: Allow panic device for pSeries guests
The guest firmware provides the same functionality as the pvpanic
device, which is not available in QEMU on pSeries, so the domain
XML should be allowed to contain the <panic> element.

On the other hand, unlike the pvpanic device, the guest firmware
can't be configured, so report an error if an address has been
provided in the XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182388
2015-06-01 06:16:29 -04:00
Michal Privoznik
335b834d95 Introduce pci-serial
https://bugzilla.redhat.com/show_bug.cgi?id=998813

Like usb-serial, the pci-serial device allows a serial device to be
attached to PCI bus. An example XML looks like this:

  <serial type='dev'>
    <source path='/dev/ttyS2'/>
    <target type='pci-serial' port='0'/>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
  </serial>

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-05-21 17:49:02 +02:00
Cole Robinson
8910e063db caps: Fix regression defaulting to host arch
My commit 747761a79 (v1.2.15 only) dropped this bit of logic when filling
in a default arch in the XML:

-    /* First try to find one matching host arch */
-    for (i = 0; i < caps->nguests; i++) {
-        if (caps->guests[i]->ostype == ostype) {
-            for (j = 0; j < caps->guests[i]->arch.ndomains; j++) {
-                if (caps->guests[i]->arch.domains[j]->type == domain &&
-                    caps->guests[i]->arch.id == caps->host.arch)
-                    return caps->guests[i]->arch.id;
-            }
-        }
-    }

That attempt to match host.arch is important, otherwise we end up
defaulting to i686 on x86_64 host for KVM, which is not intended.
Duplicate it in the centralized CapsLookup function.

Additionally add some testcases that would have caught this.

https://bugzilla.redhat.com/show_bug.cgi?id=1219191
2015-05-08 11:11:32 -04:00
Cole Robinson
fd74e23175 tests: Remove redundant aarch64 tests
My commit 7b9de914 added some aarch64 CPU test cases. I wanted to test
two different code paths but inadvertently added two of the same test
cases.

The second code path (using <cpu><model>host</model</cpu>) isn't easily
exercised via the qemu tests anyways, I'll need to look elsewhere.

Regardless, remove the redundant tests for now
2015-05-07 11:54:46 -04:00
John Ferlan
8d4614a512 qemu: Use domain iothreadids to IOThread's 'thread_id'
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.

Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.

Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id

Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.

The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
2015-04-27 12:36:35 -04:00
Cole Robinson
7b9de91404 tests: qemu: Couple aarch64 CPU tests
- Make sure aarch64 host-passthrough works correctly
- Make sure libvirt doesn't choke on cpu model=host, which is what
  virt-install/virt-manager were incorrectly specifying up until recently.
2015-04-24 10:27:01 -04:00
Cole Robinson
835cf84b7e domain: conf: Drop expectedVirtTypes
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
2015-04-20 16:43:43 -04:00
Michal Privoznik
7cf87f750b RNG schema: allow plain @floor to <bandwidth/>
The <inbound/> element to <bandwidth/> has several attributes from
which two are mandatory. Well, from two at least one has to be
present: @average or @floor or both. Instead of inventing crazy RNG
schema, let's make all the attributes optional there and rely on our
parsing code to correctly handle the situation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-16 09:07:43 +02:00
Ján Tomko
a75069be35 Fix usb device version parsing issues
Request that the number be parsed as decimal, to allow 08
and 09.

Format it with the leading zero, 1.01 and 1.10 are two
different versions.

https://bugzilla.redhat.com/show_bug.cgi?id=1210650
2015-04-13 12:33:41 +02:00
Ján Tomko
3f4c27497e Do xml->xml test for usb-redir-filter
We don't format the default '-1' fields back.
2015-04-13 12:24:26 +02:00
Andrea Bolognani
e4d7ddfdd2 conf: Don't output <cpu> tag if it contains no information.
The tag is already marked as optional in the schema, so no changes
are needed there.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1202606
2015-04-13 09:27:26 +02:00
Peter Krempa
02f0f1ccc7 tests: qemuxml2xml: Test status XML formatting and parsing
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
2015-03-25 15:42:52 +01:00
Peter Krempa
785fd9fa12 tests: qemuxml2xml: Refactor the qemuxml2xml test
To allow adding more tests, refactor the XML-2-XML test so that the
files are not reloaded always and clarify the control flow.

Result of this changes is that the active and inactive portions of the
XML are tested in separate steps rather than one test step.
2015-03-25 13:35:42 +01:00
Peter Krempa
8b54bffbab qemu: add support for memory devices
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
2015-03-23 14:25:15 +01:00
Peter Krempa
a41185d8d1 qemu: Implement setup of memory hotplug parameters
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
2015-03-23 14:25:14 +01:00
Antoni Segura Puimedon
a9fbe3b157 docs: schema and docs for the midonet virtualport type
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.

This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.

Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
2015-03-17 13:09:05 -04:00
Martin Kletzander
02ce97bca6 conf: Reorder elements inside memballoon
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit.  Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-17 12:03:33 +01:00
Peter Krempa
4bca6192f2 conf: Make specifying <memory> optional
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.

To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).

Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461

Test case changes are added to verify that the schema change and code
behave correctly.
2015-03-16 14:32:20 +01:00
Martin Kletzander
5882064084 tests: Add test for os interleaving
We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>.  It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-09 07:52:34 +01:00
Martin Kletzander
6b22e0b562 tests: Add test for virtio-mmio address type
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-09 07:52:34 +01:00
Michal Privoznik
b39b1397ea domain_conf: Format <pvpanic/> without address correctly
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):

  <devices>
    <emulator>/usr/bin/qemu</emulator>
    ...
    <panic>
    </panic>
  </devices>

Lets format "<panic/>" instead.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-06 14:22:45 +01:00
Peter Krempa
7909300498 conf: Remove duplicate entries in <metadata> by namespace
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
2015-03-05 16:24:34 +01:00
Ján Tomko
9aa316612a Remove bootloader option from QEMU
It was only supported by xenner (since commit 763a59d8),
for which we removed support in commit de9be0a.

Remove the code generating this command line option,
refuse to parse it and delete the outdated tests.

https://bugzilla.redhat.com/show_bug.cgi?id=1176050
2015-03-02 07:39:09 +01:00
Martin Kletzander
8680ea9749 docs, schema, conf: Add support for setting scheduler parameters of guest threads
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-11 17:30:06 +01:00
Erik Skultety
862bbf8a5a schema: allow multiple seclabel for devices in domaincommon.rng
In our RNG schema we do allow multiple (different) seclabels per-domain,
but don't allow this for devices, yet we neither have a check in our XML parser,
nor in a post-parse callback. In that case we should allow multiple
(different) seclabels for devices as well.
2015-02-11 09:41:36 +01:00
Ján Tomko
84f741812f Only parse custom vhost path for virtio interfaces
It is only supported for virtio adapters.
Silently drop it if it was specified for other models,
as is done for other virtio attributes.

Also mention this in the documentation.

https://bugzilla.redhat.com/show_bug.cgi?id=1147195
2015-02-06 12:52:50 +01:00
Michal Privoznik
bbd3eb5098 conf: Don't mangle vcpu placement randomly
https://bugzilla.redhat.com/show_bug.cgi?id=1170492

In one of our previous commits (dc8b7ce7) we've done a functional
change even though it was intended as pure refactor. The problem is,
that the following XML:

 <vcpu placement='static' current='2'>6</vcpu>
 <cputune>
   <emulatorpin cpuset='1-3'/>
 </cputune>
 <numatune>
   <memory mode='strict' placement='auto'/>
 </numatune>

gets translated into this one:

 <vcpu placement='auto' current='2'>6</vcpu>
 <cputune>
   <emulatorpin cpuset='1-3'/>
 </cputune>
 <numatune>
   <memory mode='strict' placement='auto'/>
 </numatune>

We should not change the vcpu placement mode. Moreover, we're doing
something similar in case of emulatorpin and iothreadpin. If they were
set, but vcpu placement was auto, we've mistakenly removed them from
the domain XML even though we are able to set them independently on
vcpus.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-01-30 13:51:22 +01:00
Michal Privoznik
5222256849 schemas: Allow all generic elements and attributes for all interfaces
There are some interface types (notably 'server' and 'client')
which instead of allowing the default set of elements and
attributes (like the rest do), try to enumerate only the elements
they know of. This way it's, however, easy to miss something. For
instance, the <address/> element was not mentioned at all. This
resulted in a strange behavior: when such interface was added
into XML, the address was automatically generated by parsing
code. Later, the formatted XML hasn't passed the RNG schema. This
became more visible once we've turned on the XML validation on
domain XML changes: appending an empty line at the end of
formatted XML (to trick virsh think the XML had changed) made
libvirt to refuse the very same XML it formatted.

Instead of trying to find each element and attribute we are
missing in the schema, lets just allow all the elements and
attributes like we're doing that for the rest of types. It's no
harm if the schema is wider than our parser allows.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-01-29 16:23:15 +01:00
Ján Tomko
bc378060f7 Add an XML test for host-model CPU with features
This was broken in a dowstream build due to a missing backport:
https://bugzilla.redhat.com/show_bug.cgi?id=1182448
2015-01-19 10:11:15 +01:00
Martin Kletzander
199390117c docs, schema, conf: Add support for PMU feature
Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-16 13:43:46 +01:00
Daniel P. Berrange
0ecd685109 Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
2015-01-13 16:26:12 +00:00
Martin Kletzander
adff345e1e qemu: Allow enabling/disabling features with host-passthrough
QEMU supports feature specification with -cpu host and we just skip
using that.  Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-13 08:51:01 +01:00
Peter Krempa
24c25a68c2 conf: Add channel state for virtio channels to the XML
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.
2014-11-21 11:00:11 +01:00
Peter Krempa
c5942a9faa test: xml2xml: Print full filenames if xml2xml test fails
To simplify looking for a problem instrument the XML comparator function
with possibility to print the filename of the failed/expected XML
output.

This is necessary as the VIR_TEST_DIFFERENT macro possibly tests two XML
files for the inactive/active state and the resulting error may not be
obvious.
2014-11-21 11:00:10 +01:00
Boris Fiuczynski
b84be34f43 qemu: Allow use of iothreads for virtio ccw disk definitions
Extending the iothread disk support from pci to pci and ccw.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-11-06 15:13:55 +01:00
Daniel P. Berrange
0d36a5d05a Fix indentation of sysinfo data
The <sysinfo> data block was indented by 2 spaces too many.
This was missed because we never had any test validating
the XML formatting.
2014-10-24 17:23:52 +01:00
Martin Kletzander
540a84ec89 docs, conf, schema: add support for shmem device
This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:08 +02:00
Ján Tomko
5b3536ae90 conf: add options for disabling segment offloading
Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
2014-09-24 16:16:45 +02:00
John Ferlan
58abf1bb36 hostdev: Add "rawio" attribute to _virDomainHostdevSubsysSCSI
Add the 'rawio' attribute to match _virDomainDiskDef and process the
hostdev XML similarly to the disk XML for a lun which supports/requires rawio
2014-09-19 07:47:46 -04:00
Martin Kletzander
def6b35989 docs, conf, schema: add support for shared memory mapping
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Ján Tomko
af8b4a2e6f conf: add backend element to interfaces
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
2014-09-16 15:38:34 +02:00
Eric Blake
7e8feed4a7 cputune: allow interleaved xml
I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.

docs/ changes best viewed with -w

* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-15 18:59:40 -06:00
John Ferlan
938fb12fad domain_conf: Add iothreadpin to cputune
https://bugzilla.redhat.com/show_bug.cgi?id=1101574

Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.

The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
2014-09-15 13:19:01 -04:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
Michal Privoznik
36cc189a46 tests: Add test cases for previous commit
This commit is rather big. Firstly, the in memory config
representation is adjusted like if security_driver was set to "none".
The rest is then just adaptation to the new code that will generate
different seclabels.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-05 08:35:34 +02:00
John Ferlan
ef8da2ad11 qemu: Allow use of iothreads for disk definitions
For virtio-blk-pci disks with the disk iothread attribute that are
running the correct emulator, add the "iothread=iothread#" to the
-device command line in order to enable iothreads for the disk as
long as the command is available, the disk iothread value provided is
valid, and is supported for the disk device being added
2014-08-28 16:27:54 -04:00
John Ferlan
72edaae78f qemu: Add support for iothreads
Add a new capability to ensure the iothreads feature exists for the qemu
emulator being run - requires the "query-iothreads" QMP command. Using the
domain XML add correspoding command argument in order to generate the
threads. The iothreads will use a name space "iothread#" where, the
future patch to add support for using an iothread to a disk definition to
merely define which of the available threads to use.

Add tests to ensure the xml/argv processing is correct.  Note that no
change was made to qemuargv2xmltest.c as processing the -object element
would require knowing more than just iothreads.
2014-08-28 16:27:53 -04:00
Alex Williamson
d071164272 Add new 'kvm' domain feature and ability to hide KVM signature
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-26 10:41:24 +02:00
Martin Kletzander
43b8123d39 docs, conf: add support for bootmenu timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Michal Privoznik
3085702b54 conf: Format interface's driver more frequently
https://bugzilla.redhat.com/show_bug.cgi?id=1128751

There's this <driver/> element under <interface/> which can have
several attributes. However, the driver element is currently formated
only if the driver's name or txmode has been specified. This makes
only a little sense as we parse even partial <driver/>, for instance:

    <interface type='user'>
      <mac address='52:54:00:e5:48:58'/>
      <model type='virtio'/>
      <driver ioeventfd='on' event_idx='on' queues='5'/>
    </interface>

But such XML would never get formatted back.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-08-12 09:29:10 +02:00
John Ferlan
54ac483e68 hostdev: Add iSCSI hostdev XML
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).

The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:

  <hostdev mode='subsystem' type='scsi' managed='yes'>
    <source protocol='iscsi' name='iqn.1992-01.com.example'>
      <host name='example.org' port='3260'/>
      <auth username='myname'>
        <secret type='iscsi' usage='mycluster_myname'/>
      </auth>
    </source>
    <address type='drive' controller='0' bus='0' target='2' unit='5'/>
  </hostdev>

The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
2014-08-07 15:07:56 -04:00
Eric Blake
232a31bea3 blockcommit: track job type in xml
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-30 06:32:38 -06:00
Michal Privoznik
3517e1b2f2 qemu: Implement ./hugepages/page/[@size, @unit, @nodeset]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-29 12:14:52 +01:00
Michal Privoznik
136ad49740 domain: Introduce ./hugepages/page/[@size, @unit, @nodeset]
<memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-29 12:02:34 +01:00
Martin Kletzander
001b9dc1dc qemu: enable disjoint numa cpu ranges
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:46 +02:00
Martin Kletzander
a05c01521c conf, schema: add support for memnode elements
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Martin Kletzander
93e82727ec numatune: Encapsulate numatune configuration in order to unify results
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Martin Kletzander
992000e6d8 conf, schema: add 'id' field for cells
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result.  When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements.  With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field.  This will be useful when we have tuning settings for
particular guest NUMA node.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Michele Paolino
a14abd463a support for QEMU vhost-user
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.

The XML looks like:

<interface type='vhostuser'>
    <mac address='52:54:00:3b:83:1a'/>
    <source type='unix' path='/tmp/vhost.sock' mode='server'/>
    <model type='virtio'/>
</interface>

Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-16 18:44:57 +02:00
Michal Privoznik
99c8d2e808 conf: Always format seclabel's model
https://bugzilla.redhat.com/show_bug.cgi?id=1113860

We've always done that. Well, until 990e46c45. Point is, if we don't
format model, we may lose a domain on libvirtd restart. If the
seclabel is implicit however, we should skip it's formatting.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-14 11:10:09 +02:00
Mike Perez
d950494129 qemu: Add cmd_per_lun, max_sectors to virtio-scsi
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3

Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-07-02 09:43:17 +02:00
Ján Tomko
96f6275513 Add test for type none model dac seclabel 2014-06-27 07:00:51 +02:00
Eric Blake
7c6fc3948e conf: alter disk mirror xml output
Now that we track a disk mirror as a virStorageSource, we might
as well update the XML to theoretically allow any type of
mirroring destination (not just a local file).  A later patch
will also be reusing <mirror> to track the block commit of the
top layer of a chain, which is another case where libvirt needs
to update the backing chain after the job is finally pivoted,
and since backing chains can have network backing files as the
destination to commit into, it makes more sense to display that
in the XML.

This patch changes output-only XML; it was already documented
that <mirror> does not affect a domain definition at this point
(because qemu doesn't provide persistent bitmaps yet).  Any
application that was starting a block copy job with older libvirt
and then relying on the domain XML to determine if it was
complete will no longer be able to access the file= and format=
attributes of mirror that were previously used.  However, this is
not going to be a problem in practice: the only time a block copy
job works is on a transient domain, and any app that is managing
a transient domain probably already does enough of its own
bookkeeping to know which file it is mirroring into without
having to re-read it from the libvirt XML.  The one thing that
was likely to be used in a mirroring job was the ready=
attribute, which is unchanged.  Meanwhile, I made sure the schema
and parser still accept the old format, even if we no longer
output it, so that upgrading from an older version of libvirt is
seamless.

* docs/schemas/domaincommon.rng (diskMirror): Alter definition.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two
styles of mirror elements.
(virDomainDiskDefFormat): Output new style.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New
file, copied from...
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here
before modernizing.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New
files.
* tests/qemuxml2xmltest.c (mymain): Test both styles.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-06 11:48:09 -06:00
Ján Tomko
5ac9b9ddff conf: fix seclabels for chardevs
We allow a seclabel to be specified in the <source> element
of a chardev:

<serial type='file'>
  <source path='/tmp/serial.file'>
    <seclabel model='dac' relabel='no'/>
  </source>
</serial>

But we format it outside the source:

<serial type='file'>
  <source path='/tmp/serial.file'/>
  <target port='0'/>
    <seclabel model='dac' relabel='no'/>
</serial>

Move the formatting inside the source to fix this to make the
seclabel persistent across XML format->parse.

Introduced by commit f8b08d0 'Add <seclabel> to character devices.'
2014-05-19 08:47:03 +02:00
Jiri Denemark
1445f34b62 tests: Test backing store XML formatting and parsing
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-24 16:07:56 +02:00
Jiri Denemark
022ccd3d62 tests: More output options for xml2xml tests
So far, qemuxml2xml test was only able to check if the result matches
the original or the appropriate XML in qemuxml2xmloutdata regardless on
flags used to format the XML. Since the result can be different
depending on VIR_DOMAIN_XML_INACTIVE flag being used or not, this patch
adds support for qemuxml2xmlout-%s-active.xml and
qemuxml2xmlout-%s-inactive.xml output files. If the file specific to the
flag used exists, it is used in preference to the generic
qemuxml2xmlout-%s.xml file when reading the expected output.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-24 16:07:17 +02:00
Eric Blake
8fb446754d conf: fix omission of <driver> in domain dumpxml
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether.  For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011.  But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.

* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-16 10:49:07 +02:00
Eric Blake
a9efe2d70c conf: better <disk> interleaving in schema
In general, we try to make virt-xml-validate tolerant of input
elements in any order when possible.  However, as written, the
RNG grammar did not permit <source> unless there was an explicit
type= attribute (even though the C code manages just fine by
defaulting to type='file').  After making the attribute optional
on the 'file' branch, I noticed that the use of diskspec was now
redundant with the branch when no <source> was supplied.

View this patch with 'git diff -b' for a better picture of the
schema change.

* docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of
choice, make type='file' default, and still preserve interleave.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Reorder XML.
* tests/qemuxml2xmltest.c (mymain): Cover new files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-15 11:45:02 +02:00
Ján Tomko
bdffab0d5c Treat zero cpu shares as a valid value
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.

Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
2014-03-26 10:10:02 +01:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Martin Kletzander
d27e6bc40f qemu: introduce spiceport chardev backend
Add a new backend for any character device.  This backend uses channel
in spice connection.  This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.

Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well).  For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Peter Krempa
600bca592b qemu: hyperv: Add support for timer enlightenments
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.

This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
2014-02-10 11:30:10 +01:00
Peter Krempa
bbd392ff86 schema: Fix guest timer specification schema according to the docs
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:

- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported

Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
2014-02-10 11:09:14 +01:00
Daniel P. Berrange
53a699a07b Exercise the ABI stability check code in test suite
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-01-10 20:32:48 +00:00
Hu Tao
4d18758df8 qemu: add support for -device pvpanic
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-13 05:53:33 -07:00
Martin Kletzander
ea130e3bf6 conf: don't format memtune with unlimited values
When changing memtune limits to unlimited with AFFECT_CONFIG, the
values in virDomainDef are set to PARAM_UNLIMITED, which causes the
whole <memtune> to be formatted.  This can be changed in all drivers,
but it also makes sense to use the default (0) as another value for
"unlimited", since zero memory limit makes no sense.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2013-12-10 09:11:26 +01:00
Michal Privoznik
9fb3f9571d virSecurityLabelDefParseXML: Don't parse label on model='none'
https://bugzilla.redhat.com/show_bug.cgi?id=1027096

If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):

    <seclabel type='dynamic' relabel='yes'/>

The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.

However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.

But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?

At the end, a test to catch this scenario is introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-11 16:01:25 +01:00
Peter Krempa
e0dc851164 qemu: Add support for paravirtual spinlocks in the guest
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.

This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.

https://bugzilla.redhat.com/show_bug.cgi?id=1008989
2013-11-08 09:44:42 +01:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Daniel P. Berrange
50ee3e0357 Don't clobber 'ret' variable in testCompareXMLToXMLHelper
The qemuxml2xmltest.c function testCompareXMLToXMLHelper would
clobber the 'ret' variable causing it to mis-diagnose OOM
errors.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Ján Tomko
01cda91809 Add pcihole64 element to root PCI controllers
<controller type='pci' index='0' model='pci-root'>
  <pcihole64 unit='KiB'>1048576</pcihole64>
</controller>

It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.

Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
2013-08-27 17:42:29 +02:00
Eric Blake
0f082e699e selinux: distinguish failure to label from request to avoid label
https://bugzilla.redhat.com/show_bug.cgi?id=924153

Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears.  The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown.  Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting.  Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible.  As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.

The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place.  When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.

In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element.  At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown.  But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.

* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-20 10:39:03 -06:00
Laine Stump
c27b0bb171 qemu: fix handling of default/implicit devices for q35
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:

usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having

  <controller type='usb' index='0'/>

translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.

video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.

sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).

ide - q35 has no ide controllers.

isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
2013-08-05 15:47:49 -04:00
Laine Stump
62ac6b4354 qemu: add dmi-to-pci-bridge controller
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.

Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.

Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.

This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
2013-08-05 15:40:49 -04:00
Laine Stump
48a3f48ac5 qemu: add pcie-root controller
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.

Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
2013-08-05 15:13:56 -04:00
Laine Stump
3ceb4c7df6 qemu: set/validate slot/connection type when assigning slots for PCI devices
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.

Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..

Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.

While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.

You may notice many places where the flags are seemingly hard-coded to

  QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI

This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.

Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.

To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
2013-07-24 06:45:07 -04:00
John Ferlan
c00b2f0dd1 conf: Introduce new XML tag "mode" for disk source
There are two ways to use a iSCSI LUN as disk source for qemu.

 * The LUN's path as it shows up on host, e.g.
   /dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1

 * The libiscsi URI from the storage pool source element host attribute, e.g.
   iscsi://demo.org:6000/iqn.1992-01.com.example/1

For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).

The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
2013-07-22 14:01:04 -04:00
Michal Privoznik
dc6f2dadac Introduce OOM reporting to virAsprintf
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
2013-07-10 11:07:31 +02:00
Ján Tomko
2e4dd4107e conf: don't check hyperv spinlock retries if disabled
<hyperv>
  <spinlocks state='off'/>
</hyperv>

results in:
error: XML error: missing HyperV spinlock retry count

Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.

https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
2013-07-04 18:39:56 +02:00
Viktor Mihajlovski
38dc212296 S390: Testcase for console default target type (virtio)
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-06-28 09:52:00 +02:00
Osier Yang
cdb9789559 conf: Generate address for scsi host device automatically
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).

Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
2013-06-01 10:00:23 +08:00
Michal Privoznik
7e744f8199 Introduce /domain/devices/interface/driver/@queues attribute
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
2013-05-22 16:31:27 +02:00
Osier Yang
6765316093 conf: Introduce sgio for hostdev
"sgio" is only valid for scsi host device.
2013-05-17 00:46:44 +08:00
Osier Yang
f2c1d9a804 conf: Introduce <shareable> for hostdev
Unlike disk device, the scsi-generic always writethrough the data,
so no need to introduce a "cache" tag, and set "cache=off".
2013-05-16 23:41:25 +08:00
Osier Yang
e3b40bec42 conf: Fix the bug of disk->copy_on_read formating
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
2013-05-16 23:07:51 +08:00
Osier Yang
a7c4202cdd qemu: Support discard for disk
QEMU introduced "discard" option for drive since commit a9384aff53,

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

This patch exposes the support in libvirt.

QEMU supported "discard" for "-drive" since v1.5.0-rc0:

% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1

So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
2013-05-15 19:01:00 +08:00
Martin Kletzander
85ec7ff6fd qemu: Add VNC WebSocket support
Adding a VNC WebSocket support for QEMU driver.  This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
2013-05-15 09:48:05 +02:00
Osier Yang
77b54b9661 qemu: New XML to disable memory merge at guest startup
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>

The XML tag is same with what we used internally for old RHEL.
2013-05-15 11:25:45 +08:00
Osier Yang
f4bb7b4807 Introduce <readonly> for hostdev
Since it's generic enough to be used by other types in future, I
put it in <hostdev> as sub-element, though now it's only used by
scsi host device.
2013-05-13 19:02:40 +08:00
Han Cheng
0d70656afd qemu: Build qemu command line for scsi host device
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:

  libvirt     qemu
-----------------------------------------
  controller  bus ($libvirt_controller.0)
  bus         channel
  target      scsi-id
  unit        lun

For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).

  libvirt            qemu
----------------------------------------------------------
  controller && bus  bus ($libvirt_controller.$libvirt_bus)
  unit               scsi-id

It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:

static const struct SCSIBusInfo megasas_scsi_info = {
    .tcq = true,
    .max_target = MFI_MAX_LD,
    .max_lun = 255,

    .transfer_data = megasas_xfer_complete,
    .get_sg_list = megasas_get_sg_list,
    .complete = megasas_command_complete,
    .cancel = megasas_command_cancel,
};

Example of the qemu command line (lsilogic controller):

  -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
  -device scsi-generic,bus=scsi0.0,scsi-id=8,\
  drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0

Example of the qemu command line (virtio-scsi controller):

  -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
  -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
  drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-13 18:50:16 +08:00
Han Cheng
5c811dcec5 conf: Generic XMLs for scsi hostdev
An example of the scsi hostdev XML:

    <hostdev mode='subsystem' type='scsi'>
      <source>
        <adapter name='scsi_host0'/>
        <address bus='0' target='0' unit='0'/>
      </source>
      <address type='drive' controller='0' bus='0' target='4' unit='8'/>
    </hostdev>

Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.

The device address must be specified manually. Later patch will let
libvirt generate it automatically.

This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-13 18:23:50 +08:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Laine Stump
731b0f36f1 qemu: use vfio-pci on commandline when appropriate
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).

Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.

This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.

qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>

These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
2013-04-25 21:28:10 -04:00
Ján Tomko
9d6e56dbce qemu: auto-add bridges and allow using them
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.

Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
2013-04-25 13:19:40 +02:00
Li Zhang
dfd0e4f7f2 qemu: Add command line builder and parser for NVRAM.
This patch is to add command line builder and parser
for NVRAM device, and add test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-25 16:50:45 +08:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
Stefan Berger
c772feb069 Add test case for TPM passthrough
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
2013-04-12 16:55:46 -04:00
Osier Yang
4bc331c894 Introduce new XMLs to specify disk source using libvirt storage
With this patch, one can specify the disk source using libvirt
storage like:

  <disk type='volume' device='disk'>
    <driver name='qemu' type='raw' cache='none'/>
    <source pool='default' volume='fc18.img'/>
    <target dev='vdb' bus='virtio'/>
  </disk>

"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.

docs/formatdomain.html.in:
  * Add documents for new XMLs
docs/schemas/domaincommon.rng:
  * Add rng for new XMLs;
src/conf/domain_conf.h:
  * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
  * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
  * New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
    type disk source.
  * New helper virDomainDiskSourcePoolDefFree to free the source def
    if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
  * New test
2013-04-08 18:48:14 +08:00
Osier Yang
d4bf0a9378 qemu: Support multiple queue virtio-scsi
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
2013-04-06 10:08:47 +08:00
Peter Krempa
9ea249e7d9 virCaps: get rid of defaultDiskDriverName
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
2013-04-04 22:42:38 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Paolo Bonzini
9f7a9aee37 qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:11:14 +08:00
Paolo Bonzini
6dca6d84ed domain: parse XML for iscsi authorization credentials
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
1d94891288 domain: add support for iscsi network disks
This plumbs in the XML description of iSCSI shares.  The next patches
will add support for the libiscsi userspace initiator.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-20 17:30:25 -06:00
Paolo Bonzini
eebbb232e6 qemu: support URI syntax for NBD
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server.  Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.

The URI syntax also supports relative paths to Unix sockets.  These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.

The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:47:50 -06:00
Paolo Bonzini
be2a15dd60 qemu: support NBD with Unix sockets
This reuses the XML format that was introduced for Gluster.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:27:56 -06:00
Paolo Bonzini
0aa9f522c4 qemu: support named nbd exports
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:12:41 -06:00
Paolo Bonzini
b96e0c18e1 qemu: test NBD command-line builder and parser
Enable more testing of NBD parsing, to ensure rewrites work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 14:42:45 -06:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Peter Krempa
e8b70ab743 tests: Add tests for virtio-rng device handling
Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.
2013-02-25 10:58:04 +01:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
Osier Yang
535aed56a2 conf: Parse and format the new XML
Like "rawio", "sgio" is only allowed for block disk of device
type "lun".

It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".
2013-01-07 21:38:43 +08:00
Osier Yang
b718ded39a qemu: Allow the user to specify vendor and product for disk
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
2012-12-07 16:53:27 +08:00
Daniel P. Berrange
4738c2a7e7 Replace 'struct qemud_driver *' with virQEMUDriverPtr
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
2012-11-28 18:17:25 +00:00
Peter Krempa
09f10a12be qemu: Add support for HyperV Enlightenment feature "relaxed"
This patch adds QEMU support for the "relaxed" feature implemented by
previous patch.
2012-10-18 12:22:50 +02:00
Martin Kletzander
3b72650181 tests: Add tests for dump-core option 2012-09-20 16:41:07 +02:00
Martin Kletzander
ec62a602bb QEMU Tests for reboot-timeout 2012-09-20 16:41:02 +02:00
Martin Kletzander
fbf9aa12c7 qemu: Add support for EOI with APIC
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.

And due to the size of the patch (17 lines) I dared to include the tests.
2012-09-14 08:32:56 +02:00
Martin Kletzander
65c4ae93b5 tests: Add tests for qemu S3/S4 state configuration
Few tests were added which are checking whether the parsing of the xml
and command-line arguments is working and compatible with each other.
2012-09-03 09:32:45 +02:00
Laine Stump
3f9274a524 conf: add <vlan> element to network and domain interface elements
The following config elements now support a <vlan> subelements:

within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>

Each vlan element must have one or more <tag id='n'/> subelements.  If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.

Some examples:

  <interface type='hostdev'/>
    <vlan>
      <tag id='42'/>
    </vlan>
    <mac address='52:54:00:12:34:56'/>
    ...
  </interface>

  <network>
    <name>vlan-net</name>
    <vlan trunk='yes'>
      <tag id='30'/>
    </vlan>
    <virtualport type='openvswitch'/>
  </network>

  <interface type='network'/>
    <source network='vlan-net'/>
    ...
  </interface>

  <network>
    <name>trunk-vlan</name>
    <vlan>
      <tag id='42'/>
      <tag id='43'/>
    </vlan>
    ...
  </network>

  <network>
    <name>multi</name>
    ...
    <portgroup name='production'/>
      <vlan>
        <tag id='42'/>
      </vlan>
    </portgroup>
    <portgroup name='test'/>
      <vlan>
        <tag id='666'/>
      </vlan>
    </portgroup>
  </network>

  <interface type='network'/>
    <source network='multi' portgroup='test'/>
    ...
  </interface>

IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
2012-08-15 13:10:57 -04:00
Marc-André Lureau
d9a269bc74 tests: add ich6 codec type test to qemuxml2argv-sound-device
Test new codec type element.
2012-05-17 11:43:35 -06:00
Daniel P. Berrange
1ebd52cb87 Fix logic for assigning PCI addresses to USB2 companion controllers
Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.

* src/qemu/qemu_command.c: Special case handling of USB2 controllers
  to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
  tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
  test to cover automatic slot assignment
2012-05-15 17:07:34 +01:00
Osier Yang
8d26a7fd4e numad: Copy 'placement' of <numatune> to <vcpu> by default
With this patch, one can also fully drive numad by:

  <vcpu>2</vcpu>
  <numatune>
    <memory placement='auto'/>
  </numatune>

New tests are added.
2012-05-08 16:57:36 -06:00
Osier Yang
97010eb1f1 numad: Set memory policy from numad advisory nodeset
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.

This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:

  <numatune>
    <memory placement='auto' mode='interleave'/>
  </numatune>

Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.

If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".

The following XML can now fully drive numad:

1) <vcpu> placement is 'auto', no <numatune> is specified.

   <vcpu placement='auto'>10</vcpu>

2) <vcpu> placement is 'auto', no 'placement' is specified for
   <numatune>.

   <vcpu placement='auto'>10</vcpu>
   <numatune>
     <memory mode='interleave'/>
   </numatune>

And it's also able to control the CPU placement and memory policy
independently. e.g.

1) <vcpu> placement is 'auto', and <numatune> placement is 'static'

   <vcpu placement='auto'>10</vcpu>
   <numatune>
     <memory mode='strict' nodeset='0-10,^7'/>
   </numatune>

2) <vcpu> placement is 'static', and <numatune> placement is 'auto'

   <vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
   <numatune>
     <memory mode='interleave' placement='auto'/>
   </numatume>

A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
2012-05-08 16:57:32 -06:00
Eric Blake
ae6aa8c396 blockjob: enhance xml to track mirrors across libvirtd restart
In order to track a block copy job across libvirtd restarts, we
need to save internal XML that tracks the name of the file
holding the mirror.  Displaying this name in dumpxml might also
be useful to the user, even if we don't yet have a way to (re-)
start a domain with mirroring enabled up front.  This is done
with a new <mirror> sub-element to <disk>, as in:

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/original.img'/>
      <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/>
      ...
    </disk>

For now, the element is output-only, in live domains; it is ignored
when defining a domain or hot-plugging a disk (since those contexts
use VIR_DOMAIN_XML_INACTIVE in parsing).  The 'ready' attribute appears
when libvirt knows that the job has changed from the initial pulling
phase over to the mirroring phase, although absence of the attribute
is not a sure indicator of the current phase.  If we come up with a way
to make qemu start with mirroring enabled, we can relax the xml
restriction, and allow <mirror> (but not attribute 'ready') on input.
Testing active-only XML meant tweaking the testsuite slightly, but it
was worth it.

* docs/schemas/domaincommon.rng (diskspec): Add diskMirror.
* docs/formatdomain.html.in (elementsDisks): Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): New members.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean them.
(virDomainDiskDefParseXML): Parse them, but only internally.
(virDomainDiskDefFormat): Output them.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise.
* tests/qemuxml2xmltest.c (testInfo): Alter members.
(testCompareXMLToXMLHelper): Allow more test control.
(mymain): Run new test.
2012-04-23 08:43:33 -06:00
Martin Kletzander
9943276fd2 Cleanup for a return statement in source files
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:

List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$'

Found files were modified with this command:
sed -i -e                                                                 \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

Then checked for nonsense.

The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e                            \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
2012-03-26 14:45:22 -06:00
Eric Blake
2e22f23bde xml: allow scaled memory on input
Output is still in kibibytes, but input can now be in different
scales for ease of typing.

* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
2012-03-07 18:24:44 -07:00
Laine Stump
3b1c191fe7 conf: parse/format type='hostdev' network interfaces
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:

  <interface type='hostdev' managed='yes'>
    <source>
      <address type='pci' domain='0' bus='0' slot='4' function='3'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
    <address type='pci' domain='0' bus='0' slot='7' function='0'/>
  </interface>

This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.

NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.

Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:

  <interface type='hostdev'>
    <source>
      <address type='usb' bus='0' device='4'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

If the vendor/product form of usb specification is used, type='usb'
is implied:

  <interface type='hostdev'>
    <source>
      <vendor id='0x0012'/>
      <product id='0x24dd'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
2012-03-05 23:24:28 -05:00
Osier Yang
c430248643 tests: Add tests for virtio-scsi and ibmvscsi controllers 2012-02-28 14:28:21 +08:00
Daniel Veillard
ded8e894dd Revert "qemu: add ibmvscsi controller model"
This reverts commit 7b345b69f2.

Conflicts:

	tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-vscsi.xml
2012-02-13 21:37:03 +08:00
Daniel Veillard
3d224ae669 Revert "qemu: add virtio-scsi controller model"
This reverts commit c9abfadf37.

Conflicts:

	tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-virtio-scsi.xml
2012-02-13 21:36:02 +08:00
Eric Blake
c052d8a89f seclabel: make code and RNG match
Commit b170eb99 introduced a bug: domains that had an explicit
<seclabel type='none'/> when started would not be reparsed if
libvirtd restarted.  It turns out that our testsuite was not
exercising this because it never tried anything but inactive
parsing.  Additionally, the live XML for such a domain failed
to re-validate.  Applying just the tests/ portion of this patch
will expose the bugs that are fixed by the other two files.

* docs/schemas/domaincommon.rng (seclabel): Allow relabel under
type='none'.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG,
presence of <seclabel> with no type implies dynamic.  Don't
require sub-elements for type='none'.
* tests/qemuxml2xmltest.c (mymain): Add test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file.
Reported by Ansis Atteka.
2012-02-06 12:04:33 -07:00
Eric Blake
8fe454ce90 build: expand rule to cover testsuite
The bulk of this patch was done with:

sed -i 's/\(\bfree *(/VIR_FREE(/g' tests/*.c

followed by fixing the few compile errors that resulted.

* cfg.mk (exclude_file_name_regexp--sc_prohibit_raw_allocation):
Remove tests from exemption.
* tests/testutils.h: Add common header.
* tests/commandhelper.c: Fix offenders.
* tests/cputest.c: Likewise.
* tests/domainsnapshotxml2xmltest.c: Likewise.
* tests/interfacexml2xmltest.c: Likewise.
* tests/networkxml2argvtest.c: Likewise.
* tests/networkxml2xmltest.c: Likewise.
* tests/nodedevxml2xmltest.c: Likewise.
* tests/nodeinfotest.c: Likewise.
* tests/nwfilterxml2xmltest.c: Likewise.
* tests/qemuargv2xmltest.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxmlnstest.c: Likewise.
* tests/qparamtest.c: Likewise.
* tests/sexpr2xmltest.c: Likewise.
* tests/storagepoolxml2xmltest.c: Likewise.
* tests/storagevolxml2xmltest.c: Likewise.
* tests/testutils.c: Likewise.
* tests/virshtest.c: Likewise.
* tests/xencapstest.c: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/xml2sexprtest.c: Likewise.
2012-02-03 10:41:46 -07:00
Laine Stump
3284ac046f qemu: (and conf) support rombar for network devices
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.

After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
2012-01-30 12:25:32 -05:00
Paolo Bonzini
b66d1bef14 qemu: parse and create -cpu ...,-kvmclock
QEMU supports a bunch of CPUID features that are tied to the kvm CPUID
nodes rather than the processor's.  They are "kvmclock",
"kvm_nopiodelay", "kvm_mmu", "kvm_asyncpf".  These are not known to
libvirt and their CPUID leaf might move if (for example) the Hyper-V
extensions are enabled. Hence their handling would anyway require some
special-casing.

However, among these the most useful is kvmclock; an additional
"property" of this feature is that a <timer> element is a better model
than a CPUID feature.  Although, creating part of the -cpu command-line
from something other than the <cpu> XML element introduces some
ugliness.

Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-27 16:51:50 +01:00
Zeeshan Ali (Khattak)
fa981fc945 Allow custom metadata in domain configuration XML
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
2012-01-24 17:06:34 -07:00
Jiri Denemark
a6f88cbd2d cpu: Optionally forbid fallback CPU models
In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.
2012-01-17 11:39:19 +01:00
Paolo Bonzini
c9abfadf37 qemu: add virtio-scsi controller model
Adding a new model for virtio-scsi roughly follows the same scheme
as the previous patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-13 14:54:48 -07:00
Paolo Bonzini
7b345b69f2 qemu: add ibmvscsi controller model
KVM will be able to use a PCI SCSI controller even on POWER.  Let
the user specify the vSCSI controller by other means than a default.

After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-13 14:13:30 -07:00
Laine Stump
177db08775 qemu: add new disk device='lun' for bus='virtio' & type='block'
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.

As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.

device='lun' is identical to the default device='disk', except that:

1) It is only allowed if bus='virtio', type='block', and the qemu
   version is "new enough" to support it ("new enough" == qemu 0.11 or
   better), otherwise the domain will fail to start and a
   CONFIG_UNSUPPORTED error will be logged).

2) The option "scsi=on" will be added to the -device arg to allow
   SG_IO commands (if device !='lun', "scsi=off" will be added to the
   -device arg so that SG_IO commands are specifically forbidden).

Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.

*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
 add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter

*src/qemu/qemu_(command|driver|hotplug).c - treat
 VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
 VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.

Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
2012-01-09 10:55:53 -05:00
Eric Blake
b43432931a seclabel: allow a seclabel override on a disk src
Implement the parsing and formatting of the XML addition of
the previous commit.  The new XML doesn't affect qemu command
line, so we can now test round-trip XML->memory->XML handling.

I chose to reuse the existing structure, even though per-device
override doesn't use all of those fields, rather than create a
new structure, in order to reuse more code.

* src/conf/domain_conf.h (_virDomainDiskDef): Add seclabel member.
* src/conf/domain_conf.c (virDomainDiskDefFree): Free it.
(virSecurityLabelDefFree): New function.
(virDomainDiskDefFormat): Print it.
(virSecurityLabelDefFormat): Reduce output if model not present.
(virDomainDiskDefParseXML): Alter signature, and parse seclabel.
(virSecurityLabelDefParseXML): Split...
(virSecurityLabelDefParseXMLHelper): ...into new helper.
(virDomainDeviceDefParse, virDomainDefParseXML): Update callers.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-dynamic-override.args:
New file.
* tests/qemuxml2xmltest.c (mymain): Enhance test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
2011-12-30 10:57:59 +08:00
Eric Blake
116d6af979 schema: rewrite seclabel rng to match code
The RNG for <seclabel> was too strict - if it was present, then it
had to have sub-elements, even if those didn't make sense for the
given attributes.  Also, we didn't have any tests of <seclabel>
parsing or XML output.

In this patch, I added more parsing tests than output tests (since
the output populates and/or reorders fields not present in certain
inputs).  Making the RNG reliable is a precursor to using <seclabel>
variants in more places in the XML in later patches.

See also:
http://berrange.com/posts/2011/09/29/two-small-improvements-to-svirt-guest-configuration-flexibility-with-kvmlibvirt/

* docs/schemas/domaincommon.rng (seclabel): Tighten rules.
* tests/qemuxml2argvtest.c (mymain): New tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*.*: New files.
2011-12-30 10:38:37 +08:00
Eric Blake
da8061eefe build: properly skip tests
I got this failure on FreeBSD:

shunloadtest.c: In function 'main':
shunloadtest.c:150: error: 'EXIT_AM_SKIP' undeclared (first use in this function)

but inspection showed several other problems, all fixed here.

* tests/domainsnapshotxml2xmltest.c [!WITH_QEMU]: Ensure
EXIT_AM_SKIP is defined.
* tests/esxutilstest.c [!WITH_ESX]: Likewise.
* tests/openvzutilstest.c [!WITH_OPENVZ]: Likewise.
* tests/qemuargv2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuhelptest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2argvtest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuxmlnstest.c [!WITH_QEMU]: Likewise.
* tests/shunloadtest.c [!linux]: Likewise.
* tests/vmx2xmltest.c [!WITH_VMX]: Likewise.
* tests/xml2vmxtest.c [!WITH_VMX]: Likewise.
2011-12-01 13:49:20 -07:00
Lei Li
55ecc49bbc Add tests for blkdeviotune
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:11 -07:00
Hu Tao
93ab58595d blkiotune: add qemu support for blkiotune.device_weight
Implement setting/getting per-device blkio weights in qemu,
using the cgroups blkio.weight_device tunable.
2011-11-29 12:26:21 -07:00
Daniel P. Berrange
0873b688c6 Allow multiple consoles per virtual guest
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
  multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
  src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
  internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_process.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
  tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
  for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
  for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
  test file
2011-11-03 12:01:05 +00:00
Marc-André Lureau
162efa1a7c Add "redirdev" redirection device
- create a new "redirdev" element for this purpose
2011-09-02 23:39:03 +08:00
Laine Stump
73c0a148af qemu: support event_idx parameter for virtio disk and net devices
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-15 09:35:42 -04:00
Matthias Bolte
cffba7ea3e tests: Unify style of test skipping code
Prefer 'return EXIT_AM_SKIP' over 'exit(EXIT_AM_SKIP)'.

Prefer 'int main(void)' over 'int main(int argc, char **argv)'.

Fix mymain signature in commandtest and nodeinfotest.
2011-07-29 12:12:58 +02:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00
Michal Privoznik
2b9efcb3df bandwidth: Add domain schema and xml2xml tests 2011-07-25 13:50:20 +08:00
Laine Stump
07f4136993 conf: support abstracted interface info in domain interface XML
the domain XML <interface> element is updated in the following ways:

1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')

2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.

3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.

The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
2011-07-21 14:46:44 -04:00
Matthias Bolte
aa14709a47 Add domain type checking
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.
2011-07-11 19:38:51 +02:00
Daniel P. Berrange
1ea83207c8 Support leases in guest XML and lock manager
A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML

  <devices>
     ...
     <lease>
       <lockspace>somearea</lockspace>
       <key>thequickbrownfoxjumpsoverthelazydog</key>
       <target path='/some/lease/path' offset='23432'/>
     </lease>
     ...
  </devices>

The 'lockspace' is a unique identifier for the lockspace which
the lease is associated

The 'key' is a unique identifier for the resource associated
with the lease.

The 'target' is the file on disk where the leases are held.

* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
  tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
  tests/qemuxml2xmltest.c: Test XML handling for leases
2011-06-02 10:54:00 +01:00
Michal Privoznik
7693c03973 tests: Add more complex domain scheme test data 2011-05-31 17:10:16 +02:00
Michal Privoznik
dbb7ebe937 tests: Test for SPICE compression options
and check regression
2011-05-31 16:33:36 +02:00
Matthias Bolte
9ba4eb3c08 tests: Lower stack usage below 4096 bytes
Make virtTestLoadFile allocate the buffer to read the file into.

Fix logic error in virtTestLoadFile, stop reading on the first empty line.

Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.
2011-04-30 19:59:52 +02:00
Eric Blake
20986e58aa tests: simplify common setup
A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!).  It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.

* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 10:21:20 -06:00
Michal Novotny
2ac455c4d2 Introduce virDomainChrDefNew()
Make: passed
Make check: passed
Make syntax-check: passed

this is the commit to introduce the function to create new character
device definition for the domain as advised by Cole Robinson
<crobinso@redhat.com>.

The function is used on the relevant places and also new tests has
been added.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-04-14 10:29:39 -06:00
Osier Yang
079ae9c7a1 cputune: New tests for cputune XML
v1 - v2:
  * Add missed tests/qemuxml2argvdata/qemuxml2argv-cputune.args
2011-03-29 22:13:46 +08:00
Osier Yang
82dfc6f38e qemu: Support vram for video of qxl type
For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 22:00:27 +08:00
Laine Stump
e9bd5c0e24 Add txmode attribute to interface XML for virtio backend
This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
2011-02-17 11:07:58 -05:00
Gui Jianfeng
d9b28a319a qemu: Implement blkio tunable XML configuration and parsing.
Implement blkio tunable XML configuration and parsing.

Reviewed-by: "Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-02-08 11:43:45 -07:00
Eric Blake
819269c4f0 qemu aio: enable support
qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.

Based on a patch originally by Matthias Dahl.

Red Hat Bugzilla #591703
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-01-28 09:09:49 -07:00
Jiri Denemark
e182ba872b tests: Add tests for per-device boot elements 2011-01-17 17:18:56 +01:00
Daniel P. Berrange
635f9ca1f3 Implement QEMU/KVM QXL video card support in QEMU driver
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL

* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
  case for generating spice args with RHEL6 kvm
2010-11-09 11:46:45 +00:00
Eric Blake
d67c189e80 vcpu: improve vcpu support in qemu command line
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
2010-10-19 10:06:33 -06:00
Nikunj A. Dadhania
d390fce413 XML parsing for memory tunables
Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test
2010-10-12 19:26:09 +02:00
Cole Robinson
82b6d7600e qemu: virtio console support
Enable specifying a virtio console device with:

<console type='pty'>
  <target type='virtio'/>
</console>
2010-07-28 16:48:00 -04:00
Cole Robinson
b2a4a383d3 tests: Test qemuxml2xml when expected xml changes
Add tests for auto memballon, implicit IDE, SCSI, virtio channel
controllers, and console/serial back compat.

Additionally, an explicit qemuxml2argvtest for scsi disks is added.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:56 -04:00
Cole Robinson
4f24ca01e8 qemu: Allow setting boot menu on/off
Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
2010-07-27 16:38:32 -04:00
David Allan
1b9347b5f1 Fix indentation for storage conf XML
* virStorageEncryptionFormat is called from both
  virDomainDiskDefFormat and virStorageVolTargetDefFormat.  The proper
  indentation in the generated XML depends on the caller.  My earlier
  patch to fix the incorrect indentation for the domain XML broke the
  indentation for the storage XML.  This patch adopts Laine's
  suggestion of requring the caller of virStorageEncryptionFormat to
  provide an unsigned int with the number of spaces the output should
  be indented.  The patch modifies both callers to provide the
  additional argument.

* Add a regression test for the domain XML

* src/conf/domain_conf.c src/conf/storage_conf.c
  src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h:
  change the indentation code
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test
2010-04-27 12:01:32 +02:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Matthew Booth
7813a0f81c Add domain support for virtio channel
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:

<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
  <target type='virtio' name='org.linux-kvm.port.0'/>
  <address type='virtio-serial' controller='0' bus='0'/>
</channel>

* docs/schemas/domain.rng: Add virtio-serial controller and virtio
  channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
  virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
  parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
  virDomainDefAddDiskControllers() renamed to
  virDomainDefAddImplicitControllers()
2010-02-18 17:52:03 +01:00
Daniel P. Berrange
65842bf669 Remove virConnectPtr from all domain XML parsing/formatting APIs 2010-02-10 11:49:23 +00:00
Daniel P. Berrange
9258ec0a2e Rewrite way QEMU PCI addresses are allocated
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.

It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
  list of existing PCI addresses, and allocating new addresses.
  Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
  qemuStartVMDaemon() method, as a prelude to moving it into the
  'define' method. Update list of allocated addresses when connecting
  to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
  tests/qemuxml2xmltest.c: Remove USB product test since all
  passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
  unused data files
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
776e37e1eb Set default disk controller/bus/unit props
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files
2010-01-15 16:38:29 +00:00
Jim Meyering
2e5efc3d6e avoid calling exit with a constant; use EXIT_* instead
This appeases a new gnulib-provided "syntax-check".
* daemon/libvirtd.c (main): Use EXIT_FAILURE, not 1.
* proxy/libvirt_proxy.c (main): Likewise, and EXIT_SUCCESS, not 0.
* tests/conftest.c (main): Likewise.
* tests/reconnect.c (main): Likewise.
* tests/testutils.h (EXIT_AM_SKIP): Define.
* tests/nodeinfotest.c (mymain): Use EXIT_AM_SKIP, not 77.
* tests/qemuargv2xmltest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/virshtest.c (mymain): Likewise.
2009-12-15 17:46:04 +01:00
Daniel P. Berrange
e7c78b0a94 Support QEMU's virtual FAT block device driver
Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks
2009-11-23 12:17:16 +00:00
Matthew Booth
af249ea468 Support for <channel> in domain and QEmu backend
allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
2009-11-05 15:31:03 +01:00
Daniel P. Berrange
58355a5bfb Move QEMU driver to src/qemu/
* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths
2009-09-21 14:41:43 +01:00
Daniel P. Berrange
d823a05aef Support configuration of huge pages in guests
Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests
2009-09-03 13:51:55 +01:00
Daniel P. Berrange
ad6d5acb42 Support <video> element for QEMU guests
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
2009-07-08 13:40:32 +01:00
Daniel P. Berrange
a6ef2e0055 Fix ifname= passing to QEMU for type=ethernet network config 2009-01-30 17:17:58 +00:00
Daniel P. Berrange
67e7416119 Support disk caching mode config 2009-01-30 17:15:39 +00:00
Daniel P. Berrange
ad70b32414 Support QEMU disk format specification in XML 2009-01-23 16:22:20 +00:00
Daniel Veillard
c8ef64bdd7 Add tests and docs for the new PCI passthrough format
* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
  document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
  and add a regression test for it.
Daniel
2009-01-12 15:09:19 +00:00
Guido Günther
46971d5ed7 pass flags argument to all virDomain*DefParse* functions 2009-01-08 13:54:20 +00:00
Daniel Veillard
a3d570c7b9 Adding support for SDL fullscreen option
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
  slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
  update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
2008-12-11 11:44:30 +00:00
Daniel Veillard
5ba372306a llow to add a disk as an USB device (QEmu/KVM)
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: patch from Guido Günther allowing to add
  disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
  test to the regression suite
Daniel
2008-08-08 15:03:00 +00:00
Daniel Veillard
d1710d35ea Extend parser and add support for USB devices in QEmu/KVM
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: Patch from Guido Günther allowing to pass
  usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
  to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel
2008-08-08 14:27:05 +00:00
Daniel P. Berrange
6385fe3ede Switch QEMU driver over to generic domain APIs 2008-07-11 19:34:11 +00:00
Daniel P. Berrange
4b23495509 Convert test suites over to new test infrastructure 2008-05-29 15:31:49 +00:00
Daniel P. Berrange
40a82f3066 Make QEMU test suite independant of host OS capabilities 2008-05-16 16:51:30 +00:00
Daniel P. Berrange
763a59d84d Support Xenner bootloader 2008-05-15 16:21:11 +00:00
Daniel P. Berrange
3a7b528d4b Add support for Xen input device in QEMU driver for xenner 2008-05-15 16:11:40 +00:00
Daniel P. Berrange
2c37f47985 Support paravirt disk configuration for xenner guests 2008-05-15 16:05:41 +00:00
Daniel P. Berrange
159cb2b97c Added support for network interface model setting 2008-04-30 12:30:55 +00:00
Daniel P. Berrange
49956f0469 Implement serial & parallel device support for QEMU driver 2008-04-25 20:46:13 +00:00
Jim Meyering
dc42a9d2de remove Vim and Emacs variable settings from C source files
Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
2008-04-10 16:53:29 +00:00
Daniel P. Berrange
63bc5dd3e1 Add formal internal capabilities API and update drivers to use it 2008-02-27 04:35:08 +00:00
Jim Meyering
a378188194 Enable the <config.h>-requiring test; fix violations
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
2008-01-29 18:15:54 +00:00
Jim Meyering
f510a6128b Clean up global name space in examples and tests.
* docs/examples/suspend.c: Declare global "conn" to be static.
* tests/qemuxml2argvtest.c: Declare global "driver" to be static.
* tests/qemuxml2xmltest.c: Likewise.


Author: Jim Meyering <meyering@redhat.com>
2008-01-14 14:04:33 +00:00
Richard W.M. Jones
4bfdb77aae Wed Dec 5 13:48:00 UTC 2007 Richard W.M. Jones <rjones@redhat.com>
* python/libvir.c, python/libvirt_wrap.h, qemud/qemud.c,
        qemud/remote.c, src/internal.h, src/openvz_conf.c,
        src/openvz_driver.c, src/proxy_internal.h, src/qemu_conf.c,
        src/qemu_driver.c, src/remote_internal.h, src/test.h, src/util.c,
        src/xen_unified.c, src/xen_unified.h, tests/nodeinfotest.c,
        tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/reconnect.c,
        tests/sexpr2xmltest.c, tests/virshtest.c, tests/xencapstest.c,
        tests/xmconfigtest.c, tests/xml2sexprtest.c:
        Change #include <> to #include "" for local includes.
        Removed many includes from src/internal.h and put them in
        the C files which actually use them.
        Removed <ansidecl.h> - unused.
        Added a comment around __func__.
        Removed a clashing redefinition of VERSION symbol.
        All limits (PATH_MAX etc) now done in src/internal.h, so we
        don't need to include those headers in other files.
2007-12-05 13:56:22 +00:00
Richard W.M. Jones
b7641686a6 Mon Nov 26 12:03:00 UTC 2007 Richard W.M. Jones <rjones@redhat.com>
* tests/Makefile.am, tests/nodeinfotest.c, tests/qemuxml2argvtest.c,
	  tests/qemuxml2xmltest.c, tests/sexpr2xmltest.c, tests/virshtest.c,
	  tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c:
	  Miscellaneous fixes to the tests to compile under Cygwin.
2007-11-26 12:03:34 +00:00
Jim Meyering
5a6571eba9 Arrange for tests to pass in a non-srcdir build.
* tests/Makefile.am: Include the contents of the *data directories
in the make-dist-built tarball by adding each of that *data
directories to EXTRA_DIST.
Also add int-overflow (via $(test_scripts)) to EXTRA_DIST.
* tests/nodeinfotest.c: Prepend "$abs_top_srcdir/tests" to
each input file name.
* tests/qemuxml2argvtest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/sexpr2xmltest.c: Likewise.
* tests/test_conf.sh: Likewise.
* tests/virshtest.c: Likewise.
* tests/xencapstest.c: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/xml2sexprtest.c: Likewise.


Author: Jim Meyering <meyering@redhat.com>
2007-11-14 10:35:58 +00:00
Daniel P. Berrange
136ebc6e3c Detect QEMU flags per VM instead of once for driver as a whole 2007-09-21 21:20:32 +00:00
Daniel P. Berrange
63dc047468 Fixed PXE network boot config 2007-09-13 22:06:54 +00:00
Daniel P. Berrange
94711ff791 Fixed memory leaks 2007-07-31 14:27:12 +00:00
Daniel P. Berrange
e3af6437f1 Fixed handling of -nographics. Added VNC listen support 2007-07-24 14:30:05 +00:00
Daniel P. Berrange
b3033b99f9 Added testsuite for QEMU XML routines 2007-07-18 21:34:22 +00:00