The only caller always passes 0 for the extent start.
Drop the 'extent_start' parameter, as well as the mention of extents
from the function name.
Change off_t extent_length to unsigned long long wipe_len, as well as the
'remain' variable.
Return -1:
* on all failures of fdatasync. Instead of propagating -errno
all the way up to the virStorageVolWipe API, which is documented
to return 0 or -1.
* after a partial wipe. If safewrite failed, we would re-use the
non-negative return value of lseek (which should be 0 in this case,
because that's the only offset we seek to).
When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.
When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.
We increase the limit before plugging in a PCI hostdev or a memory
module because some memory might need to be locked due to eg. VFIO.
Of course we should do the opposite after unplugging a device: this
was already the case for memory modules, but not for PCI hostdevs.
This function can be used to retrieve the current locked memory
limit for a process, so that the setting can be later restored.
Add a configure check for getrlimit(), which we now use.
The prlimit() function allows both getting and setting limits for
a process; expose the same functionality in our wrapper.
Add the const modifier for new_limit, in accordance with the
prototype for prlimit().
Cygwin cannot build the vbox driver yet:
CC vbox/libvirt_driver_vbox_impl_la-vbox_glue.lo
In file included from vbox/vbox_glue.c:27:0:
vblox/vbox_XPCOMCGlue.c:63:3: error: #error "Port me"
# error "Port me"
^
In file included from vbox/vbox_XPCOMCGlue.c:45:0,
from vbox/vbox_glue.c:27:
vbox/vbox_XPCOMCGlue.c: In function 'tryLoadOne':
vbox/vbox_XPCOMCGlue.c:98:46: error: 'DYNLIB_NAME' undeclared (first use in this function)
if (virAsprintf(&name, "%s/%s", dir, DYNLIB_NAME) < 0)
^
./util/virstring.h:245:31: note: in definition of macro 'virAsprintf'
strp, __VA_ARGS__)
^
Rather than trying to figure out how to get dynamic loading of
vbox to work under cygwin (since I don't even have a working vbox
setup to test whether it works), I'm going to be lazy and just
default to not even trying vbox on cygwin.
In commit 686eb7a24f, the break was not considered part of the
condition, hence breaking after first node when searching.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Instead of replicating the information (domain, bus, slot, function)
inside the virPCIDevice structure, use the already-existing
virPCIDeviceAddress structure.
For users of the module, this means that the object returned by
virPCIDeviceGetAddress() can no longer be NULL and must no longer
be freed by the caller.
Upstream Xen is in the process of splitting the (stable API) xtl_*
interfaces out from the (unstable API) libxenctrl library and into a
new (stable API) libxentoollog.
In order to be compatible with Xen both before and after this
transition check for xtl_createlogger_stdiostream in a libxentoollog
library and use it if present. If it is not present assume it is in
libxenctrl.
Compile tested on Xen 4.6 and a development tree with the split in
place.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025230
Add a new helper virStorageBackendLogicalMatchPoolSource to compare the
pool's source name against the output from a 'pvs' command to list all
volume group physical volume data on the host. In addition, compare the
pool's source device list against the particular volume group's device
list to ensure the source device(s) listed for the pool match what the
was listed for the volume group.
Then for pool startup or check API's we need to call this new API in
order to ensure that the pool we're about to start or declare active
during checkPool has a valid definition vs. the running host.
Rework virStorageBackendLogicalFindPoolSources a bit to create a
helper virStorageBackendLogicalGetPoolSources that will make the
pvs call in order to generate a list of associated pv_name and vg_name's.
A future patch will make use of this for start/check processing to
ensure the storage pool source definition matches expectations.
https://bugzilla.redhat.com/show_bug.cgi?id=1025230
When determining whether a FS pool is mounted, rather than assuming that
the FS pool is mounted just because the target.path is in the mount list,
let's make sure that the FS pool source matches what is mounted
Refactor the code that builds the pool source string during the FS
storage pool mount to be a separate helper.
A future patch will use the helper in order to validate the mounted
FS matches the pool's expectation during poolCheck processing
when appropriate, of course. If the config for a domain specifies boot
order with <boot dev='blah'/> elements, e.g.:
<os>
...
<boot dev='hd'/>
<boot dev='network'/>
</os>
Then the first disk device in the config will have ",bootindex=1"
appended to its qemu commandline -device options, and the first (and
*only* the first) network interface device will get ",bootindex=2".
However, if the first network interface device is a "hostdev" device
(an SRIOV Virtual Function (VF) being assigned to the domain with
vfio), then the bootindex option will *not* be appended. This happens
because the bootindex=n option corresponding to the order of "<boot
dev='network'/>" is added to the -device for the first network device
when network device commandline args are constructed, but if it's a
hostdev network device, its commandline arg is instead constructed in
the loop for hostdevs.
This patch fixes that omission by noticing (in bootHostdevNet) if the
first network device was a hostdev, and if so passing on the proper
bootindex to the commandline generator for hostdev devices - the
result is that ",bootindex=2" will be properly appended to the first
"network" device in the config even if it is really a hostdev
(including if it is assigned from a libvirt network pool). (note that
this is only the case if there is no <bootmenu enabled='yes'/> element
in the config ("-boot menu-on" in qemu) , since the two are mutually
exclusive - when the bootmenu is enabled, the individual per-device
bootindex options can't be used by qemu, and we revert to using "-boot
order=xyz" instead).
If a greater level of control over boot order is desired (e.g., more
than one network device should be tried, or a network device other
than the first one encountered in the config), then <boot
dev='network'/> in the <os> element should not be used; instead, the
individual device elements in the config should be given a "<boot
order='n'/>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278421
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be
obvious that the virSecurity* functions deal with security
labels even without it.
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be obvious
that the virSecurity* functions deal with security labels even
without it.
Many of the functions follow the pattern:
virSecurity.*Security.*Label
Remove the second 'Security' from the names, it should be obvious
that the virSecurity* functions deal with security labels even
without it.
Commit 256496e1 introduced a detection if "is locked" in error replay
from qemu monitor. Commit c4073657 fixed a memory leak, but it was
pointed out by Peter, that this could be done cleaner without
stringifing the replay.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The return value of virJSONValueToString() should be freed when
no longer needed. This is not the case after 256496e1.
==26902== 138 bytes in 2 blocks are definitely lost in loss record 1,051 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EBB9: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2225)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
==26902== 106 bytes in 1 blocks are definitely lost in loss record 1,033 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EC0C: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2227)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Moving tasks to cgroups implied sched_setaffinity. Changing the cpus in
a set implies the same for all tasks in the group.
The old code put the the thread into the cpuset inherited from the
machine cgroup, which allowed it to run outside of vcpupin for a short
while.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
The machine cgroup is a superset, a parent to the emulator and vcpuX
cgroups. The parent cgroup should never have any tasks directly in it.
In fact the parent cpuset might contain way more cpus than the sum of
emulatorpin and vcpupins. So putting tasks in the superset will allow
them to run outside of <cputune>.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
virCgroupNewMachine used to add the pidleader to the newly created
machine cgroup. Do not do this implicit anymore.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Firstly, there's a bug (or typo) in the only place where we call
this function: @multiqueue is set whenever @tapfdSize is greater
than zero, while in fact the condition should have been 'greater
than one'.
Then, secondly, since the condition depends on just one
variable, that we are even passing down to the function, we can
move the condition into the function and drop useless argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When user configures vhost-user interface and forgets to also configure
any shared memory, the search for the root cause of non-operational
interface might take unpleasantly long time. Let's enhance user
experience by emitting a warning in the logs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266982
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some older systems, e.g. RHEL-6 do not have IFF_MULTI_QUEUE flag
which we use to enable multiqueue feature. Therefore one gets the
following compile error there:
CC util/libvirt_util_la-virnetdevmacvlan.lo
util/virnetdevmacvlan.c: In function 'virNetDevMacVLanTapSetup':
util/virnetdevmacvlan.c:338: error: 'IFF_MULTI_QUEUE' undeclared (first use in this function)
util/virnetdevmacvlan.c:338: error: (Each undeclared identifier is reported only once
util/virnetdevmacvlan.c:338: error: for each function it appears in.)
make[3]: *** [util/libvirt_util_la-virnetdevmacvlan.lo] Error 1
So, whenever user wants us to enable the feature on such systems,
we will just throw a runtime error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt file system storage driver determines what file to
act on by concatenating the pool location with the volume name.
If a user is able to pick names like "../../../etc/passwd", then
they can escape the bounds of the pool. For that matter,
virStoragePoolListVolumes() doesn't descend into subdirectories,
so a user really shouldn't use a name with a slash.
Normally, only privileged users can coerce libvirt into creating
or opening existing files using the virStorageVol APIs; and such
users already have full privilege to create any domain XML (so it
is not an escalation of privilege). But in the case of
fine-grained ACLs, it is feasible that a user can be granted
storage_vol:create but not domain:write, and it violates
assumptions if such a user can abuse libvirt to access files
outside of the storage pool.
Therefore, prevent all use of volume names that contain "/",
whether or not such a name is actually attempting to escape the
pool.
This changes things from:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
Vol ../../../../../../etc/haha created
$ rm /etc/haha
to:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
error: Failed to create vol ../../../../../../etc/haha
error: Requested operation is not valid: volume name '../../../../../../etc/haha' cannot contain '/'
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '56e2171c6' removed a variable from the argument list, but
neglected to update the ATTRIBUTE_NONNULL values, so when commit id
'08da97bfb' added a couple of arguments, the values were off.
Always return LLONG_MAX even on 32 bit systems. The limitation
originates from our use of "unsigned long" in several APIs. The internal
data type is unsigned long long. Make the test suite deterministic by
removing the architecture difference.
Flaw was introduced in 645881139b where
I've added a test that uses too large numbers.
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
Ta-da! Now that we know how to open a macvtap device multiple
times, we can finally enable the multiqueue feature. Everything
else is already prepared (e.g. command line generation) from the
previous iteration where the feature was implemented for
TUN/TAP devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Like we are doing for TUN/TAP devices, we should do the same for
macvtaps. Although, it's not as critical as in that case, we
should do it for the consistency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are few outdated things. Firstly, we don't need to undergo
the torture of fopen, fscanf and fclose just to get the interface
index when we have nice wrapper over that: virNetDevGetIndex.
Secondly, we don't need to have statically allocated buffer for
the path we are opening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So yet again one of integer arguments that we use as a boolean.
Since the argument count of the function is unbearably long
enough, lets turn those booleans into flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the very first log message we send to any output, we include
the libvirt version number and package string. In some bug reports
we have been given libvirtd.log files that came from a different
host than the corresponding /var/log/libvirt/qemu log files. So
extend the initial log message to include the hostname too.
eg on first log message we would now see:
$ libvirtd
2015-12-04 17:35:36.610+0000: 20917: info : libvirt version: 1.3.0
2015-12-04 17:35:36.610+0000: 20917: info : hostname: dhcp-1-180.lcy.redhat.com
2015-12-04 17:35:36.610+0000: 20917: error : qemuMonitorIO:687 : internal error: End of file from monitor
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1276198
Prior to commit id '98322052' failure to saferead the block device would
cause an error to be logged and the device to be skipped while attempting
to discover/create a stable target path for a new LUN (NPIV).
This was because virStorageBackendSCSIFindLUs ignored errors from
processLU and virStorageBackendSCSINewLun.
Ignoring the failure allowed a multipath device with an "active" and
"ghost" to be present on the host with the "ghost" block device being
ignored. This patch will return a -2 to the caller indicating the desire
to ignore the block device since it cannot be used directly rather than
fail the pool startup.
I found this useful while processing a volume that wouldn't end up
showing up in the resulting list of block volumes. In this case, the
partition type wasn't found in the disk_types table.
Similar to the openflags VIR_STORAGE_VOL_OPEN_NOERROR processing, if some
read processing operation fails, check the readflags for the corresponding
error flag being set. If so, rather then causing an error - use VIR_WARN
to flag the error, but return -2 which some callers can use to perform
specific actions. Use a new VIR_STORAGE_VOL_READ_NOERROR flag in a new
VolReadErrorMode enum.
While processing the volume for lseek, virFileReadHeaderFD, and
virStorageFileGetMetadataFromBuf - failure would cause an error,
but ret would not be set. That would result in an error message being
sent, but successful status being returned.
