We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
According to the policy described on https://libvirt.org/platforms.html
the QEMU versions in the oldest relevant releses are:
SLES 12: 2.0.0
RHEL 7: 1.5.3
Ubuntu 14.04: 2.0.0
Set the minimum to 1.5.0 and drop support for RHEL 6.
This will let us assume lots of capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability will be set when the pcie-pci-bridge device
is available in the QEMU binary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When GIC support was introduced (QEMU 2.6 timeframe) we needed
to make sure both GICv2 hardware and GICv3 hardware were handled
correctly, and that was achieved by having separate capabilities
data for each.
Now that we have capabilities data for several QEMU versions we
can stop storing data for GICv2 and GICv3 hardware separately,
and instead have GICv2 data for QEMU <= 2.10 and GICv3 data for
QEMU >= 2.12, without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
Introduce qemu capabilities for these devices.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The QEMU binary is compiled from the v2.12.0-rc0 tag.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 4ae59411fa introduced the ability to make probing for
device properties conditional on a capability being set, but
didn't extend the use of this feature to existing devices.
This commit does the last bit of work, which results in a lot
of pointless QMP chatter no longer happening and our test suite
shrinking a fair bit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Let us introduce the xml and reply files for QEMU 2.11.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add the DUMP_COMPLETED check to the capabilities. This is the
mechanism used to determine whether the dump-guest-memory command
can support the "-detach" option and thus be able to wait on the
event and allow for a query of the progress of the dump.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell
and Broadwell machines.
Therefore, place microcode version in the virQEMUCaps struct and
XML, and rebuild the cache if the versions do not match.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All serial devices shoule have an associated capability.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All serial devices shoule have an associated capability.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Detect the capability via the query-qmp-schema for blockdev-add
to find the 'password-secret' parameter that will allow the iSCSI
code to use the master secret object to encrypt the secret for an
and only need to provide the object id of the secret on the command
line thus obsfuscating the passphrase.
'share-rw' for the disk device configures qemu to allow concurrent
access to the backing storage.
The capability is checked in various supported disk frontend buses since
it does not make sense to partially backport it.
This capability says if qemu is capable of specifying distances
between NUMA nodes on the command line. Unfortunately, there's no
real way to check this and thus we have to go with version check.
QEMU introduced this in 0f203430dd8 (and friend) which was
released in 2.10.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The architecture itself is called ppc64, and it can run both in big
endian and little endian mode - the latter is known as ppc64le.
From the (virtual) hardware point of view, ppc64 is a more accurate
name so it should be used here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Using the query-qmp-schema introspection - look for the 'vxhs'
blockdevOptions type.
NB: This is a "best effort" type situation as there is not a
mechanism to determine whether the running QEMU has been
built with '--enable-vxhs'. All we can do is check if the
option to use vxhs for a blockdev-add exists in the command
infrastructure which does not take that into account when
building its table of commands and options.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For reference, these were generated by updating a local qemu git
repository to the latest upstream, making sure the latest dependencies
were met via "dnf builddep qemu" from my sufficiently privileged root
account, checking out the v2.10.0 tag, and building in order to generate
an "x86_64-softmmu/qemu-system-x86_64" image.
Then using a clean libvirt tree updated to master and built, the image
was then provided as input:
tests/qemucapsprobe /path/to/x86_64-softmmu/qemu-system-x86_64 > \
tests/qemucapabilitiesdata/caps_2.10.0.x86_64.replies
With the .replies file in place and the DO_TEST line added and build,
then running the following commands:
touch tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml
VIR_TEST_REGENERATE_OUTPUT=1 ./tests/qemucapabilitiestest
to generate tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml and both
were added to the commit.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The patch adds a capability for spapr-pci-host-bridge.numa_node.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This new capability can be used to detect whether a QEMU
binary supports the spapr-pci-host-bridge controller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Every qemu version we support has QEMU_CAPS_CHARDEV, so stop
explicitly tracking it and blacklist it like we've done for many
other feature flags.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new capability for the "-machine loadparm" QEMU option.
Add the capabilities replies/xml for s390x for QEMU 2.9.50.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
This patch maps /domain/cpu/cache element into -cpu parameters:
- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off
Any other <cache> element is forbidden.
The tricky part is detecting whether QEMU supports the CPU properties.
The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.
The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.
QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.
Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.
Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.
As a result of this change
<cpu mode='host-model'>
<feature name='invtsc' policy='require'/>
</cpu>
will work with all QEMU versions. Such CPU definition would be forbidden
with QEMU >= 2.9.0 without this patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The event is fired when a given block backend node (identified by the
node name) experiences a write beyond the bound set via
block-set-write-threshold QMP command. This wires up the monitor code to
extract the data and allow us receiving the events and the capability.
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
The static CPU model expansion is designed to return only canonical
names of all CPU properties. To maintain backwards compatibility libvirt
is stuck with different spelling of some of the features, but we need to
use the full expansion to get the additional spellings. In addition to
returning all spelling variants for all properties the full expansion
will contain properties which are not guaranteed to be migration
compatible. Thus, we need to combine both expansions. First we need to
call the static expansion to limit the result to migratable properties.
Then we can use the result of the static expansion as an input to the
full expansion to get both canonical names and their aliases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Due to the extra architecture-specific logic, it's already
necessary for users to call virQEMUCapsHasPCIMultiBus(),
so the capability itself is just a pointless distraction.
QEMU 2.9.0 is not released yet but it's close to its release and
we need this data to implement new features that will be in
that release.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When qmp query-cpu-model-expansion is available probe Qemu for its view of the
host model. In kvm environments this can provide a more complete view of the
host model because features supported by Qemu and Kvm can be considered.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
query-cpu-model-expansion is used to get a list of features for a given cpu
model name or to get the model and features of the host hardware/environment
as seen by Qemu/kvm.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Expected Qemu replies for versions 2.7 and 2.8 from the s390x
Qemu binary.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Qemu 2.8.0+ changes arguments structure for blockdev-add in the effort
to make it finally stable. Since libvirt recently added the detection of
gluster debug support relying on the old syntax we need to add the new
as well.
QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.
We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:
<domainCapabilities>
...
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'>
<model fallback='allow'>Skylake-Client</model>
...
</mode>
<mode name='custom' supported='yes'>
<model usable='yes'>qemu64</model>
<model usable='yes'>qemu32</model>
<model usable='no'>phenom</model>
<model usable='yes'>pentium3</model>
<model usable='yes'>pentium2</model>
<model usable='yes'>pentium</model>
<model usable='yes'>n270</model>
<model usable='yes'>kvm64</model>
<model usable='yes'>kvm32</model>
<model usable='yes'>coreduo</model>
<model usable='yes'>core2duo</model>
<model usable='no'>athlon</model>
<model usable='yes'>Westmere</model>
<model usable='yes'>Skylake-Client</model>
...
</mode>
</cpu>
...
</domainCapabilities>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPU models (and especially some additional details which we will start
probing for later) differ depending on the accelerator. Thus we need to
call query-cpu-definitions in both KVM and TCG mode to get all data we
want.
Tests in tests/domaincapstest.c are temporarily switched to TCG to avoid
having to squash even more stuff into this single patch. They will all
be switched back later in separate commits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's set QEMU_CAPS_KVM and QEMU_CAPS_ENABLE_KVM early so that the rest
of the probing code can use these capabilities to handle KVM/TCG replies
differently.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Do all the stuff for the vhost-scsi capability in QEMU,
so it's in place for our checks later.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Note that as a gicv3 machine was not available the schema data is taken
from the gicv2 case. It should be identical since qemu would be built
from the same source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.
This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.
The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.
Remove the command from the supported commands list temporarily so that
QMP introspection code can be added without breaking tests and having to
tweak the test data in the same commit.
This will be later reverted and test data will be added. The aarch64
code is special as it calls additional commands and thus the test data
can't be added upfront.
