Power 8 platform's basic hotpluggable unit is a core rather than a
thread for x86_64 family. This introduces most of the complexity of the
matching code and thus needs to be tested.
The test data contain data captured from in-order cpu hotplug and
unplug operations.
During review it was reported that adding at least 11 vcpus creates a
collision of prefixes in the monitor matching algorithm. Add a test case
to verify that the problem won't happen.
As the combination algorithm is rather complex and ugly it's necessary
to make sure it works properly. Add test suite infrastructure for
testing it along with a basic test based on x86_64 platform.
To allow matching up the data returned by query-cpus to entries in the
query-hotpluggable-cpus reply for CPU hotplug it's necessary to extract
the QOM path as it's the only link between the two.
QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.
When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.
Prepare to extract more data by returning an array of structs rather than
just an array of thread ids. Additionally report fatal errors separately
from qemu not being able to produce data.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:
<forwarder addr='192.168.123.25'/>
This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:
<forwarder domain='example.com' addr='192.168.1.1'/>
<forwarder domain='www.example.com'/>
<forwarder domain='travesty.org' addr='10.0.0.1'/>
would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.
This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:
<dns enable='no'/>
to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
==18324== 32 bytes in 1 blocks are still reachable in loss record 41 of 114
==18324== at 0x4C2C070: calloc (vg_replace_malloc.c:623)
==18324== by 0x4EA479B: virAlloc (viralloc.c:144)
==18324== by 0x4EA674A: virBitmapNewQuiet (virbitmap.c:77)
==18324== by 0x4EA67F7: virBitmapNew (virbitmap.c:106)
==18324== by 0x4EC777D: dnsmasqCapsNewEmpty (virdnsmasq.c:801)
==18324== by 0x4EC781B: dnsmasqCapsNewFromBuffer (virdnsmasq.c:815)
==18324== by 0x407CF4: mymain (networkxml2conftest.c:99)
==18324== by 0x409CF0: virTestMain (testutils.c:982)
==18324== by 0x4080EA: main (networkxml2conftest.c:136)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The script was returning success unless it failed on the last file.
This went unnoticed because sc_prohibit_long_lines forbids lines
longer than 90 characters in .arg[sv] files.
Check whether the disable-legacy property is present on the following
devices:
virtio-balloon-pci
virtio-blk-pci
virtio-scsi-pci
virtio-serial-pci
virtio-9p-pci
virtio-net-pci
virtio-rng-pci
virtio-gpu-pci
virtio-input-host-pci
virtio-keyboard-pci
virtio-mouse-pci
virtio-tablet-pci
Assuming that if QEMU knows other virtio devices where this property
is applicable, it will have at least one of these devices.
Added in QEMU by:
commit e266d421490e0ae83044bbebb209b2d3650c0ba6
virtio-pci: add flags to enable/disable legacy/modern
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.
Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:
http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html
for details. Introduced by commit id 'a1344f70'.
The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
Commit 11567cf added some libxl tests into domaincapstest and
added libvirt_driver_libxl_impl.la to domaincapstest_LDADD.
This causes link fail on systems without GNU regex implementation:
gmake[2]: Entering directory '/usr/home/novel/code/libvirt/tests'
CCLD domaincapstest
../src/.libs/libvirt_driver_libxl_impl.a(libvirt_driver_libxl_impl_la-libxl_capabilities.o):
In function `libxlMakeCapabilities':
libxl/libxl_capabilities.c:(.text+0x6b2): undefined reference to
`rpl_regcomp'
libxl/libxl_capabilities.c:(.text+0x6d0): undefined reference to
`rpl_regerror'
libxl/libxl_capabilities.c:(.text+0x803): undefined reference to
`rpl_regexec'
libxl/libxl_capabilities.c:(.text+0xa58): undefined reference to
`rpl_regfree'
clang-3.8: error: linker command failed with exit code 1 (use -v to
see invocation)
This happens because on these system it tries to use gnulib's builtin
regex implementation, but doesn't link to gnulib.
Fix by adding $(GNULIB_LIBS) along with libvirt_driver_libxl_impl.la to
domaincapstest_LDADD.
It may happen that a developer wants to run just a specific
subset of tests:
tests $ VIR_TEST_RANGE=22 ../run ./virschematest
This now fails miserably:
==6840== Invalid read of size 8
==6840== at 0x4F397C0: virXMLValidatorValidate (virxml.c:1216)
==6840== by 0x402B72: testSchemaFile (virschematest.c:53)
==6840== by 0x403737: virTestRun (testutils.c:180)
==6840== by 0x402CF5: testSchemaDir (virschematest.c:98)
==6840== by 0x402EB1: testSchemaDirs (virschematest.c:131)
==6840== by 0x40314D: mymain (virschematest.c:194)
==6840== by 0x4051AF: virTestMain (testutils.c:982)
==6840== by 0x4035A9: main (virschematest.c:217)
==6840== Address 0x10 is not stack'd, malloc'd or (recently) free'd
Problem is, we are trying to do two types of tests here: validate
RNG schema itself, and validate XML files against RNG schemas.
And the latter tries to re-use a resource allocated in the
former. Therefore if the former is skipped (due to
VIR_TEST_RANGE) we have to allocate the resource manually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the user doesn't specify any model for a USB controller,
we use an architecture-dependent default, but we don't reflect
it in the guest XML.
Pick the default USB controller model when parsing the guest
XML instead of when creating the QEMU command line, so that
our choice is saved back to disk.
==8630== Invalid read of size 8
==8630== at 0x4EA4F0F: virFree (viralloc.c:582)
==8630== by 0x4F398F0: virXMLValidatorFree (virxml.c:1257)
==8630== by 0x40305C: mymain (virschematest.c:191)
==8630== by 0x405159: virTestMain (testutils.c:982)
==8630== by 0x403553: main (virschematest.c:215)
==8630== Address 0xcd72243 is 131 bytes inside a block of size 177 free'd
==8630== at 0x4C2B1F0: free (vg_replace_malloc.c:473)
==8630== by 0x4EA4F19: virFree (viralloc.c:582)
==8630== by 0x4ED0973: virFindFileInPath (virfile.c:1646)
==8630== by 0x405149: virTestMain (testutils.c:980)
==8630== by 0x403553: main (virschematest.c:215)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1353296
On UNIX like systems there are no constraints on what characters
can be in file/dir names (except for NULL, obviously). Moreover,
some values that we think of as paths (e.g. disk source) are not
necessarily paths at all. For instance, some hypervisors take
that as an arbitrary identifier and corresponding file is then
looked up by hypervisor in its table. Instead of trying to fix
our regular expressions (and forgetting to include yet another
character there), lets drop the validation completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
Since the introduction of CMT features (commit v1.3.5-461-gf294b83)
starting a domain with host-model CPU on a host which supports CMT fails
because QEMU complains about unknown 'cmt' feature:
qemu-system-x86_64: CPU feature cmt not found
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The generated command line wouldn't work since QEMU doesn't know what
'cmt' is. The following patch will fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Doing a load, copy, format cycle on all QEMU capabilities XML files
should make sure we don't forget to update virQEMUCapsNewCopy when
adding new elements to QEMU capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In qemu, enabling this feature boils down to adding the following
onto the command line:
-global driver=cfi.pflash01,property=secure,value=on
However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A bunch of cases were only being tested for WHEN_ACTIVE or
WHEN_INACTIVE. Use WHEN_BOTH for all except the very few that
actually require the existing setup.
At the beginning of the test, some preparation work is done. For
instance new virSecurityManager is created. If this fails for
whatever reason, we try to fetch the latest error and print the
error message contained in it. However, if there's a bug in our
code and no error is reported, this approach will lead to crash,
while with virGetLastErrorMessage() it won't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
Failure to parse the schema file would not trigger a test suite failure.
In addition to making the test fail it's necessary to split up the
parsing of the schema file into a separate test.
This is necessary as the XML validator uses libvirt errors to report
problems parsing of the actual schema RNG needs to be split out into a
separate function and called via virTestRun which has the
infrastructure to report them.
Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
==2064442== 200 (88 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 54 of 73
==2064442== at 0x4C2E0F0: calloc (vg_replace_malloc.c:711)
==2064442== by 0x18E75B80: virAllocVar (viralloc.c:560)
==2064442== by 0x18EC43B0: virObjectNew (virobject.c:193)
==2064442== by 0x18EC476E: virObjectLockableNew (virobject.c:219)
==2064442== by 0x1906BC73: virSecurityManagerNewDriver (security_manager.c:93)
==2064442== by 0x1906C076: virSecurityManagerNewStack (security_manager.c:115)
==2064442== by 0x43CC39: qemuTestDriverInit (testutilsqemu.c:548)
==2064442== by 0x4337ED: mymain (qemumonitorjsontest.c:2440)
==2064442== by 0x43BABE: virTestMain (testutils.c:982)
==2064442== by 0x43A490: main (qemumonitorjsontest.c:2558)
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
