The blockdev-backup QMP command was introduced in qemu-2.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The event was introduced in qemu-2.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active block commit is supported since qemu-2.0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need two attributes of usb-host device to set:
guest-reset and guest-resets-all. The former was introduced in
QEMU v4.0.0-rc0~56^2 and the other in v4.2.0-rc1~9^2. Hence,
track the latter only as it's only starting from that commit when
QEMU has both attributes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All QEMU versions we care about already support migration events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is now unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 58ba0f6a3d.
Conflict:
* src/qemu/qemu_capabilities.[ch]
Because other new cap flags had been added since the original
commit, reformatting was necessary to follow the "groups of
five" pattern.
* tests.qemucapabilitiesdata/caps_6.2.0.x86_64.xml
This file was added after the original commit that we
are reverting, so had to be manually edited to remove
the two capabilities.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 618e8665db.
This is the first in a series of 10 commits that revert (in reverse
order) the changes to add the <acpi-hotplug-bridge state='on|off'/>
switch to libvirt domain XML, which unfortunately needs to be removed
due to QEMU developers discovering a flaw with the design of the QEMU
commandline switch used to implement the libvirt switch that will
likely result in a new and different method of selecting hotplug
modes. Because the libvirt switch has not been in any official
releases of libvirt, we are still able to remove it completely, rather
than deprecating it.
The original commits began with commit
58ba0f6a3d. The other original commit
IDs are documented in each revert commit.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 58ba0f6a3d added a capability which
is supported by all qemu versions we support. Remove it and the
associated dead code. Since the capability isn't present in any upstream
release we can delete it completely.
Specifically the commit itself states that it was introduced "around
(qemu) 2.1". The rest of the code handles properly that the feature is
used only on x86 with the i440fx machine so the capability is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added support for i440fx specific global boolean flag
PIIX4_PM.acpi-pci-hotplug-with-bridge-support
around version 2.1. This flag is enabled by default. When disabled, it
turns off acpi pci hotplug for cold plugged pci bridges in i440fx
machine types.
Very recently, in qemu version 6.1, the same global option was also
added for q35 machine types as well.
ICH9-LPC.acpi-pci-hotplug-with-bridge-support
This option turns on or off acpi based hotplug for cold plugged pcie
bridges like pcie root ports. This flag is also enabled by
default. Please refer to the following qemu changes:
c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
This patch adds the corresponding qemu capabilities in libvirt. For
i440fx, the capability is detected as
QEMU_CAPS_PIIX_ACPI_HOTPLUG_BRIDGE. For q35, the capability is
detected as QEMU_CAPS_ICH9_ACPI_HOTPLUG_BRIDGE.
Please note that the test specific qemu capabilities .replies files
has already been updated as a part of regular refreshing them when a
new qemu version is released. Hence, no updates to those files are
required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Now that it's no longer used, remove probing for it
and mark it as deprecated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code assumes that all supported qemu versions have this capability
so we can retire it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added to 'query-command-line-options' in qemu commit 5559716c98
("util/qemu-config: Add loadparm to qemu machine_opts") released in
qemu-v2.10.0 but makes sense for s390 only. Treat it the same as the
keywrap capabilities in previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu introduced these options in 2eb1cd0768 ("s390x: CPACF: Handle key
wrap machine options") released in qemu-v2.3.0 but was exposed in
query-command-line-options only in 5bcfa0c543 ("util/qemu-config: fix
missing machine command line options").
The problem is that they are exposed even for architectures which don't
actually in fact support those.
Make the two capabilities a bit more useful by assuming them only on
s390 and thus removing them from other arches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
