Commit Graph

279 Commits

Author SHA1 Message Date
Daniel P. Berrange
7300f68dff Add public APIs for storage volume upload/download
New APIs are added allowing streaming of content to/from
storage volumes.

* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
  virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
  code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
  Add dummy entries in driver table for new APIs
2011-03-29 12:17:33 +01:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Daniel P. Berrange
cb4aba9b6a Add public API for setting migration speed on the fly
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions

* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/libxl/libxl_driver.c: Stub new API
2011-03-22 15:53:08 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Nikunj A. Dadhania
78ba748ef1 virsh: fix memtune's help message for swap_hard_limit
* Correct the documentation for cgroup: the swap_hard_limit indicates
  mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
2011-03-17 16:45:06 -06:00
Matthias Bolte
5cc370aa36 Don't use INT64_MAX in libvirt.h because it requires stdint.h
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED uses INT64_MAX but stdint.h
was not and should not be included. Therefore, libvirt.h was
not self-contained.

Instead of including stdint.h specify the value directly.
2011-03-11 22:08:24 +01:00
Gui Jianfeng
13c5282122 libvirt: add virDomain{Get,Set}BlkioParameters
Add virDomainSetBlkioParameters virDomainGetBlkioParameters

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-03-10 17:53:16 -07:00
Taku Izumi
e8340a8b79 setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-03-10 15:02:58 -07:00
Daniel P. Berrange
2ed6cc7bec Expose event loop implementation as a public API
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling

   virEventRegister(....callbacks...)

The app would call

   virEventRegisterDefaultImpl()

And then have a thread somewhere calling

    static bool quit = false;
    ....
    while (!quit)
      virEventRunDefaultImpl()

* daemon/libvirtd.c, tools/console.c,
  tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
  virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
  and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
  VIR_FROM_EVENTS
2011-03-07 14:16:13 +00:00
Jiri Denemark
3ed18372a3 libvirt-qemu: Fix enum type declaration 2011-02-14 12:35:39 +01:00
Eric Blake
353b760953 sysinfo: expose new API
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.

* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
2011-02-08 19:21:26 -07:00
Jiri Denemark
2169472ab6 qemu: Add shortcut for HMP pass through
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:

    virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'

which is not a very convenient way of debugging qemu.

This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just

    virsh qemu-monitor-command --hmp DOM "info kvm"

Also the result is converted from

    {"return":"kvm support: enabled\r\n"}

to just plain HMP:

    kvm support: enabled

If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
2011-02-03 22:20:30 +01:00
Matthias Bolte
b75fab32ec Add documentation for VIR_DOMAIN_MEMORY_PARAM_UNLIMITED
Otherwise apibuild.py complains about it.
2011-01-18 23:14:37 +01:00
Nikunj A. Dadhania
d94a14f89d memtune: Let virsh know the unlimited value for memory tunables
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
2011-01-14 17:17:27 -07:00
Eric Blake
2deb32ae02 virterror: avoid API breakage with vmware
Fix glitch in commit cddd2a06 (thankfully post-0.8.6, so no
released version has the glitch).

Document and try to workaround glitch in commit 46e9b0f (in 0.8.0),
which invalidated 6 virErrorNumber values dating as far back as 0.7.1.

My audit did not find any other glitches until pre-0.1.0 days.  I'm
not sure how to add a syntax-check off the top of my head, but
hopefully the explicit numbering will make people think twice about
renumbering in the future.

* include/libvirt/virterror.h (virErrorDomain): Avoid inserting
new values in the middle, and add explicit numbering to help avoid
this in the future.
(virErrorNumber): Add explicit numbering, and document the snafu.
* src/remote/remote_driver.c (remoteIO): Compensate for the snafu.
2010-12-22 09:09:04 -07:00
Jean-Baptiste Rouault
cddd2a0628 Add VMware Workstation and Player driver 2010-12-17 21:19:39 +01:00
Jiri Denemark
ac9dd4a676 Fix host CPU counting on unusual NUMA topologies
The nodeinfo structure includes

    nodes   : the number of NUMA cell, 1 for uniform mem access
    sockets : number of CPU socket per node
    cores   : number of core per socket
    threads : number of threads per core

which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.

We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).

As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.

This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.

This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
2010-11-25 10:49:47 +01:00
Osier Yang
347d73f211 virDomainIsUpdated: define the new public API
introduce new public API "virDomainIsUpdated"

* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
2010-11-23 14:22:31 -07:00
Daniel P. Berrange
7c08fcc439 Add a generic internal API for handling any FD based stream
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback

The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O

* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
  VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
  generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
  src/libvirt_private.syms: Generic reusable FD based streams
2010-11-11 16:02:57 +00:00
Daniel P. Berrange
88a9b382c6 Introduce a virDomainOpenConsole API
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.

* src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in, src/driver.h: Define the
  new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
  API entry point
2010-11-11 16:02:41 +00:00
Cole Robinson
96d52fcf43 qemu: Add flag to force a CDROM eject
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.

This has been requested for RHEV:

https://bugzilla.redhat.com/show_bug.cgi?id=626305

v2: Change flag name, bool cleanups
2010-11-10 12:31:20 -05:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
778c0976c0 Add a sysinfo util module and read host info API
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode

* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
  src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
  error code for that module
* po/POTFILES.in: add new file for translations
2010-11-08 15:14:50 +01:00
Matthias Bolte
916f95b7aa Rename VIR_DOMAIN_SWAP_HARD_LIMIT to VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT
To get them under the common VIR_DOMAIN_MEMORY_* prefix.
2010-10-20 19:33:11 +02:00
Nikunj A. Dadhania
c1468e3f8f Update comments for the memory tunables macros
* include/libvirt/libvirt.h.in: Update comment with actual description
2010-10-20 11:38:39 +02:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Eric Blake
ea3f5c6809 vcpu: add new public API
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.

* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
2010-10-19 10:00:17 -06:00
Daniel Veillard
0df671513d Fixes for documentation extraction
* include/libvirt/libvirt.h.in: some of the function type description
  were broken so they could not be automatically documented
* src/util/event.c docs/apibuild.py: event.c exports one public API
  so it needs to be scanned too, avoid a few warnings
2010-10-13 13:50:07 +02:00
Matthias Bolte
43c2c61f68 Fix several minor problems introduced by the memtune series
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.

Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.

Update remote_protocol-structs to placate make syntax-check.

Undo unintended modifications in vboxDomainGetInfo.

Update the function table of the VirtualBox and XenAPI drivers.
2010-10-12 21:24:11 +02:00
Nikunj A. Dadhania
bf1b76ffaa Adding structure and defines for virDomainSet/GetMemoryParameters
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.

dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs

v4:
+ Add unsigned int flags to the public api for future extensions

v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.

v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
2010-10-12 19:26:09 +02:00
Eric Blake
4018a026b2 build: fix VPATH builds
After the recent libvirt-qemu library addition, VPATH builds fail with:

  CC     libvirt_qemu_la-libvirt-qemu.lo
In file included from ../../src/libvirt-qemu.c:29:
../../include/libvirt/libvirt-qemu.h:17:22: error: libvirt.h: No such file or directory
...
  CCLD   libvirt-qmeu.la
/usr/bin/ld: cannot open linker script file libvirt_qemu.syms: No such file or directory

This fixes both issues (there are still some documentation VPATH issues,
but those don't show up with 'make check').

* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): While libvirt.syms is
generated and lives in $(builddir), libvirt_qemu.syms is static
and lives in $(srcdir).
* include/libvirt/libvirt-qemu.h (includes): Pull in libvirt.h via
the public location, since this is a public header.
2010-07-26 12:06:48 -06:00
Chris Lalancette
21adf03c2d Qemu Monitor API entry point.
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point.  Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.

Changes since v1:
 - Go back to using the virDriver table for qemuDomainMonitorCommand, due to
   linking issues
 - Added versioning information to the libvirt-qemu.so

Changes since v2:
 - None

Changes since v3:
 - Add LGPL header to libvirt-qemu.c
 - Make virLibConnError and virLibDomainError macros instead of function calls

Changes since v4:
 - Move exported symbols to libvirt_qemu.syms

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:14 -04:00
Eric Blake
460ca88b98 libvirt: introduce domainCreateWithFlags API
Persistent domain creation needs the same features as transient
domains, but virDomainCreate lacks the flags argument present in
virDomainCreateXML.  virDomainCreateFlags is already claimed as
a public enum, so we have to break convention and expose
virDomainCreateWithFlags.

* include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add.
* src/driver.h (virDrvDomainCreateWithFlags): Internal API.
* src/libvirt.c (virDomainCreateWithFlags): Glue public API to
driver API.
* src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
2010-06-15 07:32:41 -06:00
Eric Blake
fb8552f83a maint: simplify some ignore files
* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
2010-06-15 07:31:10 -06:00
Eric Blake
2502ebb30a virDomainCreateXML: support new flag
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add
VIR_DOMAIN_START_PAUSED.
* src/libvirt.c (virDomainCreateXML): Update documentation.
* src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag
as unimplemented.
* src/opennebula/one_driver.c (oneDomainCreateAndStart):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise.
* src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise.
* src/qemu/qemu_driver.c (qemudDomainCreate): Likewise.
* src/test/test_driver.c (testDomainCreateXML): Likewise.
* src/uml/uml_driver.c (umlDomainCreate): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise.
* src/xen/xend_internal.c (xenDaemonCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
2010-06-08 15:35:55 -06:00
Chris Lalancette
60d05f7321 Allow nwfilter functions to be compiled with C++
Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++.  Move
them inside of the braces, which should fix the problem.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-25 09:29:33 -04:00
Jim Meyering
d54bad5d0e note a typo: VIR_MIGRATE_TUNNELLED should be VIR_MIGRATE_TUNNELED,
so that searches for properly spelled "TUNNELED" turn up
the surprising spelling of this public symbol.
* include/libvirt/libvirt.h.in: Add a comment.
2010-05-19 08:08:52 +02:00
Matthias Bolte
32d9e0707c Add VIR_STORAGE_POOL_INACCESSIBLE to denote inaccessible storage pools
This status will be used by the ESX storage driver.

For example a running NFS pool is inaccessible when the NFS server is
currently unreachable.
2010-05-18 01:34:34 +02:00
Kenneth Nagin
b0a3f8b6c5 qemu: live migration with non-shared storage for kvm
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).

I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling.  I also verified that the fix doesn't
affect normal migration with shared storage.
2010-05-04 16:03:36 -06:00
Daniel P. Berrange
34dcbbb470 Add support for another explicit IO error event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor
2010-04-30 15:52:59 +01:00
Daniel P. Berrange
24aad9f7be Add virDomainGetBlockInfo API to query disk sizing
Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size

* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo
2010-04-29 17:20:24 +01:00
Chris Lalancette
2f992d4be4 Snapshot API framework.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-05 10:24:34 -04:00
Daniel Veillard
15c647a91e Add managed save API entry points
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points
2010-04-04 11:07:48 +02:00
Daniel P. Berrange
cd2404a3c3 Keep track of guest paused state after disk IO / watchdog events
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:

  VIR_DOMAIN_EVENT_SUSPENDED

with a detail being one of:

  VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
  VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG

To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event

* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
  or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
2010-04-01 12:35:46 +01:00
Daniel Veillard
5bbde877e7 Fix a merge error leftover 2010-03-29 18:27:12 +02:00
Daniel Veillard
bf7354072f Add an error module and message for the hooks subsystem
* include/libvirt/virterror.h: add VIR_FROM_HOOK and VIR_ERR_HOOK_SCRIPT_FAILED
* src/util/virterror.c: associated strings
2010-03-29 18:21:04 +02:00
Jiri Denemark
e455b221be Introduce UPDATE_CPU flag for virDomainGetXMLDesc
This flag is used in migration prepare step to send updated XML
definition of a guest.

Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
2010-03-26 23:05:23 +01:00
Stefan Berger
46e9b0fb4e Implementation of the public API
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:15 +00:00
Stefan Berger
c71a2100b1 Add public API
This patch adds extensions to libvirt's public API necessary for
controlling the new functionality from remote for example.

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:15 +00:00
Daniel P. Berrange
46a2ea3689 Introduce a new virDomainUpdateDeviceFlags public API
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.

* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
  driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
  stubs for new driver entry point
2010-03-26 14:13:28 +00:00