The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced by QEMU commit 98fc1ada4cf70af0f1df1a2d7183cf786fc7da05
virtio: add vhost-user-fs base device
Released in QEMU v4.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Presence of the virtio-net-pci option called "failover" indicates
support in a qemu binary of a simplistic bonding of a virtio-net
device with another PCI device. This feature allows migration of
guests that have a network device assigned to a guest with VFIO, by
creating a network bond device in the guest consisting of the
VFIO-assigned device and a virtio-net-pci device, then temporarily
(and automatically) unplugging the VFIO net device prior to migration
(and hotplugging an equivalent device on the migration
destination). (The feature is called "failover" because the bond
device uses the vfio-pci netdev for normal guest networking, but
"fails over" to the virtio-net-pci netdev once the vfio-pci device is
unplugged for migration.)
Full functioning of the feature also requires support in the
virtio-net driver in the guest OS (since that is where the bond device
resides), but if the "failover" commandline option is present for the
virtio-net-pci device in qemu, at least the qemu part of the feature
is available, and libvirt can add the proper options to both the
virtio-net-pci and vfio-pci device commandlines to indicate qemu
should attempt doing the failover during migration.
This patch just adds the qemu capabilities flag "virtio-net.failover".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is used to check if qemu is capable of rng-builtin object.
This object is added since qemu-4.2.0-rc0, commit 6c4e9d48.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.
Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU 4.2.0 will report default CPU types used by each machine type and
we will want to start using it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Almost all TCG query-machines replies match KVM. The only exceptions are
4.2.0 replies on s390x which differ in the reported default CPU type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new functions are designed to load and format capabilities which
depend on the accelerator (host CPU expansion and CPU models).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ARM implementation of query-cpu-model-expansion only
supports full expansion, so we have to make sure we're using
that expansion mode if we want to obtain any useful data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mirrors the existing QEMU_CAPS_X86_MAX_CPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately this results in a lot of churn because of the eigth
hundred and change QEMU commits since the file was last touched,
but the only part we actually care about is the fact that the
query-cpu-model-expansion QMP command is now available on aarch64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.
This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
