virNetworkObjUpdate takes care of all virNetworkUpdate-related changes
to the data stored in the in-memory virNetworkObj list. It should be
called by network drivers that use this in-memory list.
virNetworkObjUpdate *does not* take care of updating any disk-based
copies of the config, nor does it perform any other operations
necessary to have the new config data take effect (e.g. it won't
re-write dnsmasq host files, nor will it send a SIGHUP to dnsmasq) -
those things should all be taken care of in the network driver
function that calls virNetworkObjUpdate (assuming that it returns
success).
These new functions are highly inspired by those in domain_conf.c (but
not identical), and are intended to make it simpler to update the
various combinations of live/persistent network configs.
The network driver wasn't previously as careful about the separation
between the live "status" in network->def and the persistent "config"
in network->newDef (or sometimes in network->def). This series
attempts to remedy some of that, but probably doesn't go all the way
(enough to get these functions working and enable continued work on
virNetworkUpdate though).
bridge_driver.c and test_driver.c were updated in a few places to take
advantage of the new functions and/or account for changes in argument
lists.
Validates the wwn while parsing, error out if it's malformed.
* src/util/util.h: Declare virValidateWWN
* src/util/util.c: Implement virValidateWWN
* src/libvirt_private.syms: Export virValidateWWN.
* src/conf/domain_conf.h: New member 'wwn' for disk def.
* src/conf/domain_conf.c: Parse and format disk <wwn>
virNetworkAssignDef was allocating a new network object, initing and
grabbing its lock, then potentially freeing it without unlocking or
destroying the lock. In practice 1) this will probably never happen,
and 2) even if it did, the lock implementation used on most (all?)
platforms doesn't actually hold any resources for an initialized or
held lock, but it still bothered me, so I moved the realloc that could
lead to this bad situation earlier in the function, and now the mutex
isn't inited or locked until we are assured of complete success.
These two objects were previously always parsed as a part of an IpDef,
but we will now need to be able to parse them on their own for
virNetworkUpdate(). Split the parsing functions out, with no
functional changes.
Simply returns the object list. Supports to filter the secrets
by its storage location, and whether it's private or not.
src/secret/secret_driver.c: Implement listAllSecrets
src/conf/node_device_conf.h:
* New macro VIR_CONNECT_LIST_NODE_DEVICES_FILTERS_CAP
* Declare virNodeDeviceList
src/conf/node_device_conf.c:
* New helpers virNodeDeviceCapMatch, virNodeDeviceMatch.
virNodeDeviceCapMatch looks up the list of all the caps the device
support, to see if the device support the cap type.
* Implement virNodeDeviceList
src/libvirt_private.syms:
* Export virNodeDeviceList
* Export virNodeDevCapTypeFromString
New options is added to support EOI (End of Interrupt) exposure for
guests. As it makes sense only when APIC is enabled, I added this into
the <apic> element in <features> because this should be tri-state
option (cannot be handled as standalone feature).
The 'def->target.addr' hasn't been initialized in virDomainChrDefNew() and
its value is always '0xffffffff', in addition, the following test scenario
hasn't also include 'address' element in channel XML block, so the branch
'if (addrStr == NULL)' is hit in virDomainChrDefParseTargetXML(), the
programming jumps to 'error' label to release relevant resources, and the
statement 'if (VIR_ALLOC(def->target.addr) < 0)' hasn't been executed then
the virDomainChrDefFree() will free 'def->target.addr'(0xffffffff) via
VIR_FREE(), which results in libvirt crash, to use valgrind can also
find a 'Invalid free() / delete / delete[]' error. This patch just adjusts
codes order to initialize 'def->target.addr' firstly.
With this patch, libvirt hasn't crash and can get a expected error message "
XML error: guestfwd channel does not define a target address".
How to reproduce?
1. define a guest with the following channel XML configuration
$ cat foo.xml
<snip>
<channel type='pty'>
<target type='guestfwd'/>
</channel>
</snip>
$ virsh define foo.xml
2. actual result
error: Failed to define domain from /tmp/foo.xml
error: End of file while reading data: Input/output error
error: Failed to reconnect to the hypervisor
GDB debugger information:
<snip>
Breakpoint 1, virDomainChrDefFree (def=0x7f8ab000ec70) at conf/domain_conf.c:1264
...ignore
1264 {
(gdb) p def->target
$2 = {port = -1, addr = 0xffffffff, name = 0xffffffff <Address 0xffffffff out of bounds>}
</snip>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=856489
Signed-off-by: Alex Jia <ajia@redhat.com>
If no private data needs to be maintained, it can be useful
to create virDomainObjPtr instances without having a virCapsPtr
instance around. Adapt the virDomainObjNew() function to allow
for a NULL caps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=795929http://git.qemu.org/?p=qemu.git;a=commitdiff;h=6af165892cf900291046f1d25f95416f379504c2
This patch define and parse the input XML of USB redirection filter.
<devices>
...
<redirdev bus='usb' type='spicevmc'>
<address type='usb' bus='0' port='4'/>
</redirdev>
<redirfilter>
<usbdev class='0x08' vendor='0x1234' product='0xbeef' \
version='2.00' allow='yes'/>
<usbdev allow='no'/>
</redirfilter>
...
</devices>
There is no 1:1 mapping between ports and redirected devices and
qemu and spicy client couldn't decide into which usbredir ports
the client can 'plug' redirected devices. So it make sense to apply
all of filter rules global to all existing usb redirection devices.
class attribute is USB Class codes. version is bcdDevice value
of USB device. vendor and product is USB vendorId and productId.
-1 can be used to allow any value for a field. Except allow attribute
the other four are optional, default value is -1.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
Historically, the first <console> element is treated as the
alias of a <serial> device. In the virDomainDeviceInfoIterate,
This situation is not considered. It still handles the first <console>
element as another devices, which means that for console[0] with
serial targetType, it calls callback function another time.
It will cause the problem of address conflicts when assigning
spapr-vio address for serial device on pSeries guest.
For pSeries guest, the serial configuration in the xml file
is as the following:
<serial type='pty'>
<target port='0'/>
<address type='spapr-vio'/>
</serial>
Console configuration is default, the dumped xml file is as the following:
<serial type='pty'>
<source path='/dev/pts/5'/>
<target port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</serial>
<console type='pty' tty='/dev/pts/5'>
<source path='/dev/pts/5'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</console>
It shows that the <console> device is the alias of serial device.
So its address is the same as the serial device. When detecting
the conflicts in the qemuAssignSpaprVIOAddress the first console
and the serial device conflicts because virDomainDeviceInfoIterate()
still handle these as two different devices, and in the qemuAssignSpaprVIOAddress(),
it will compare these two devices' addressed. If they have same address,
it will report address conflict error.
So this patch is to handle the first console which targetType is serial
as the alias of serial device to avoid address conflicts error reported.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
src/conf/network_conf.c: Add virNetworkMatch to filter the networks;
and virNetworkList to iterate over all the networks with the filter.
src/conf/network_conf.h: Declare virNetworkList and define the macros
for filters.
src/libvirt_private.syms: Export virNetworkList.
GNOME Boxes sometimes stops getting domain events from libvirtd, even
after restarting it. Further investigation in libvirtd shows that
events are properly queued with virDomainEventStateQueue, but the
timer virDomainEventTimer which flushes the events and sends them to
the clients never gets called. Looking at the event queue in gdb
shows that it's non-empty and that its size increases with each new
events.
virDomainEventTimer is set up in virDomainEventStateRegister[ID]
when going from 0 client connecte to 1 client connected, but is
initially disabled. The timer is removed in
virDomainEventStateRegister[ID] when the last client is disconnected
(going from 1 client connected to 0).
This timer (which handles sending the events to the clients) is
enabled in virDomainEventStateQueue when queueing an event on an
empty queue (queue containing 0 events). It's disabled in
virDomainEventStateFlush after flushing the queue (ie removing all
the elements from it). This way, no extra work is done when the queue
is empty, and when the next event comes up, the timer will get
reenabled because the queue will go from 0 event to 1 event, which
triggers enabling the timer.
However, with this Boxes bug, we have a client connected (Boxes), a
non-empty queue (there are events waiting to be sent), but a disabled
timer, so something went wrong.
When Boxes connects (it's the only client connecting to the libvirtd
instance I used for debugging), the event timer is not set as expected
(state->timer == -1 when virDomainEventStateRegisterID is called),
but at the same time the event queue is not empty. In other words,
we had no clients connected, but pending events. This also explains
why the timer never gets enabled as this is only done when an event
is queued on an empty queue.
I think this can happen if an event gets queued using
virDomainEventStateQueue and the client disconnection happens before
the event timer virDomainEventTimer gets a chance to run and flush
the event. In this situation, virDomainEventStateDeregister[ID] will
get called with a non-empty event queue, the timer will be destroyed
if this was the only client connected. Then, when other clients connect
at a later time, they will never get notified about domain events as
the event timer will never get enabled because the timer is only
enabled if the event queue is empty when virDomainEventStateRegister[ID]
gets called, which will is no longer the case.
To avoid this issue, this commit makes sure to remove all events from
the event queue when the last client in unregistered. As there is
no longer anyone interested in receiving these events, these events
are stale so there is no need to keep them around. A client connecting
later will have no interest in getting events that happened before it
got connected.
src/conf/storage_conf.c: Add virStoragePoolMatch to filter the
pools; Add virStoragePoolList to iterate over the pool objects
with filter.
src/conf/storage_conf.h: Declare virStoragePoolMatch,
virStoragePoolList, and the macros for filters.
src/libvirt_private.syms: Export helper virStoragePoolList.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
There is a new <pm/> element implemented that can control what ACPI
sleeping states will be advertised by BIOS and allowed to be switched
to by libvirt. The default keeps defaults on hypervisor, otherwise
forces chosen setting.
The documentation of the pm element is added as well.
Introducing a new iolimits element allowing to override certain
properties of a guest block device like the physical and logical
block size.
This can be useful for platforms with 'non-standard' disk formats
like S390 DASD with its 4K block size.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
To avoid backward compatibility issues, this patch suppresses
auto-generated DAC labels from XML. This change affects commands such as
dumpxml and save.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
With this patch libvirt tries to assign a model to a single seclabel
when model is missing. Libvirt will look up at host's capabilities and
assign the first model to seclabel.
This patch fixes:
1. The problem with existing guests that have a seclabel defined in its XML.
2. A XML parse error when a guest is restored.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.
virDomainVcpuPinDefCopy when the control flow reaches out of memory
cleanup code, the flow would end in a infinite loop as the loop variable
wasn't decremented.
Also a dereference of NULL pointers was possible if allocation of the
Vcpu pinning definiton structure failed.
When checking for seclabels without security models, def->nseclabels is
already set to n. In the case of an error def->seclabels is freed but
nseclabels is left untouched. This leads to a segmentation fault when
def is freed in virDomainDefParseXML.
The name 'virDomainDiskSnapshot' didn't fit in with our normal
conventions of using a prefix hinting that it is related to a
virDomainSnapshotPtr. Also, a future patch will reuse the
enum for declaring where the VM memory is stored.
* src/conf/snapshot_conf.h (virDomainDiskSnapshot): Rename...
(virDomainSnapshotLocation): ...to this.
(_virDomainSnapshotDiskDef): Update clients.
* src/conf/domain_conf.h (_virDomainDiskDef): Likewise.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Likewise.
* src/conf/snapshot_conf.c: (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDefFormat):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotCreateDiskActive, qemuDomainSnapshotCreateXML):
Likewise.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
We were failing to react to allocation failure when initializing
a snapshot object list. Changing things to store a pointer
instead of a complete object adds one more possible point of
allocation failure, but at the same time, will make it easier to
react to failure now, as well as making it easier for a future
patch to split all virDomainSnapshotPtr handling into a separate
file, as I continue to add even more snapshot code.
Luckily, there was only one client outside of domain_conf.c that
was actually peeking inside the object, and a new wrapper function
was easy.
* src/conf/domain_conf.h (_virDomainObj): Use a pointer.
(virDomainSnapshotObjListInit): Rename.
(virDomainSnapshotObjListFree, virDomainSnapshotForEach): New
declarations.
(_virDomainSnapshotObjList): Move definitions...
* src/conf/domain_conf.c: ...here.
(virDomainSnapshotObjListInit, virDomainSnapshotObjListDeinit):
Rename...
(virDomainSnapshotObjListNew, virDomainSnapshotObjListFree): ...to
these.
(virDomainSnapshotForEach): New function.
(virDomainObjDispose, virDomainListPopulate): Adjust callers.
* src/qemu/qemu_domain.c (qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAllMetadata): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad)
(qemuDomainUndefineFlags, qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainListAllSnapshots)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListAllChildren)
(qemuDomainSnapshotLookupByName, qemuDomainSnapshotGetParent)
(qemuDomainSnapshotGetXMLDesc, qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDelete): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new function.
This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts. Also updates
XML Schema for new entries and docs.
Introduce 2 APIs to support emulator threads pin.
1) virDomainEmulatorPinAdd: setup emulator threads pin with a given cpumap string.
2) virDomainEmulatorPinDel: remove all emulator threads pin.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Port allocations for SPICE and VNC behave almost the same (with
default ports), but there is some mess in the code. This patch clears
these inconsistencies and makes sure the same behavior will be used
when ports for remote displays are changed.
Changes:
- hard-coded number 5900 removed (handled elsewhere like with VNC)
- reservedVNCPorts renamed to reservedRemotePorts (it's not just for
VNC anymore)
- QEMU_VNC_PORT_{MIN,MAX} renamed to QEMU_REMOTE_PORT_{MIN,MAX}
- port allocation unified for VNC and SPICE
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This function is needed by the network driver in a later commit.
It is useful in functions like networkNotifyActualDevice and
networkReleaseActualDevice
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
