Currently upon a migration a callback is created when a 802.1qbg link
is set to PREASSOCIATE, this should not happen because this is a no-op
on most switches, and does not lead to an ASSOCIATE state. This patch
only creates callbacks when CREATE or RESTORE is requested. Migration
and libvirtd restart scenarios are already handled elsewhere.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
The below patch fixes the following memory leak.
==20624== 24 bytes in 2 blocks are definitely lost in loss record 532 of 1,867
==20624== at 0x4A05E46: malloc (vg_replace_malloc.c:195)
==20624== by 0x38EC27FC01: strdup (strdup.c:43)
==20624== by 0x4EB6BA3: virDomainChrSourceDefCopy (domain_conf.c:1122)
==20624== by 0x495D76: qemuProcessFindCharDevicePTYs (qemu_process.c:1497)
==20624== by 0x498321: qemuProcessWaitForMonitor (qemu_process.c:1258)
==20624== by 0x49B5F9: qemuProcessStart (qemu_process.c:3652)
==20624== by 0x468B5C: qemuDomainObjStart (qemu_driver.c:4753)
==20624== by 0x469171: qemuDomainStartWithFlags (qemu_driver.c:4810)
==20624== by 0x4F21735: virDomainCreate (libvirt.c:8153)
==20624== by 0x4302BF: remoteDispatchDomainCreateHelper (remote_dispatch.h:852)
==20624== by 0x4F72C14: virNetServerProgramDispatch (virnetserverprogram.c:416)
==20624== by 0x4F6D690: virNetServerHandleJob (virnetserver.c:164)
==20624== by 0x4E8F43D: virThreadPoolWorker (threadpool.c:144)
==20624== by 0x4E8EAB5: virThreadHelper (threads-pthread.c:161)
==20624== by 0x38EC606CCA: start_thread (pthread_create.c:301)
==20624== by 0x38EC2E0C2C: clone (clone.S:115)
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers. Reported by Jiri Denemark.
* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.
<filesystemtgt> is redundant, as every group uses it; <address>
shouldn't be in <filesystemtgt> in case of the meaning could be
"filesystemtarget"; The elements <address>, <alias>, <target>,
... should be interleaved.
So that a domain xml which doesn't have "placement" specified, but
"cpuset" is specified, could be parsed. And in this case, the
"placement" mode will be set as "static".
Since now we have fixed domain UUID for test driver, defining
a domain with different name but same UUID doesn't work any
more. This patch delete the UUID from the dumped XML so that
it could be generated.
The objects (domain, pool, network, etc) for testing are defined/
started each time when opening a connect to test driver, and thus
the UUID for the objects will be generated each time, with different
values. e.g.
% for i in {1..3}; do ./tools/virsh --connect \
test:///default dumpxml test | grep uuid; done
<uuid>a1b6ee1f-97de-f0ee-617a-0cdb74947df5</uuid>
<uuid>ee68d7d2-3eb9-593e-2769-797ce1f4c4aa</uuid>
<uuid>fecb1d3a-918a-8412-e534-76192cf32b18</uuid>
It's the potential bug which can cause operations like below to fail:
$ virsh -c test:///default dumpxml test > test.xml
[ Some modificatons, though it's not supported, but it should work ]
$ virsh -c test:///default define test.xml
This patch set fixed UUID for objects which support it. (domain,
pool, network).
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When using the xm/xend stack to manage instances there is a bug
that causes the emulated interfaces to be unusable when the vif
config contains type=ioemu.
The current code already has a special quirk to not use this
keyword if no specific model is given for the emulated NIC
(defaulting to rtl8139).
Essentially it works because regardless of the type argument,i
the Xen stack always creates emulated and paravirt interfaces and
lets the guest decide which one to use. So neither xl nor xm stack
actually require the type keyword for emulated NICs.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
'omitted' was mispelt 'commited' twice. One of the sentences with
the typo was also missing an 'is' ('each VCPU *is* pinned to all...')
which I added in this commit while I was at it.
Currently, we have 3 boolean arguments we have to pass
to qemuProcessStart(). As libvirt grows it is harder and harder
to remember them and their position. Therefore we should
switch to flags instead.
lvcreate want's the parent pool's name, not the pool path
lvchange and lvremove want lv specified as $vgname/$lvname
This largely worked before because these commands strip off a
starting /dev. But https://bugzilla.redhat.com/show_bug.cgi?id=714986
is from a user using a 'nested VG' that was having problems.
I couldn't find any info on nested LVM and the reporter never responded,
but I reproduced with XML that specified a valid source name, and
set target path to a symlink.
As explained in previous patch, numad will balance the affinity
dynamically, so reflecting the cpuset from numad at the first
time doesn't make much case, and may just could cause confusion.
Instead of returning a CPUs list, numad returns NUMA node
list instead, this patch is to convert the node list to
cpumap before affinity setting. Otherwise, the domain
processes will be pinned only to CPU[$numa_cell_num],
which will cause significiant performance losses.
Also because numad will balance the affinity dynamically,
reflecting the cpuset from numad back doesn't make much
sense then, and it may just could produce confusion for
the users. Thus the better way is not to reflect it back
to XML. And in this case, it's better to ignore the cpuset
when parsing XML.
The codes to update the cpuset is removed in this patch
incidentally, and there will be a follow up patch to ignore
the manually specified "cpuset" if "placement" is "auto",
and document will be updated too.
The linux-2.6.32 kernel header does not yet define IFLA_VF_MAX and others,
which breaks compiling a new libvirt on old systems like Debian Squeeze.
(I also have to add --without-macvtap --disable-werror --without-virtualport to
./configure to get it to compile.)
Signed-off-by: Philipp Hahn <hahn@univention.de>
This is based on recent developments on patch checker and the
goal is to keep a list of pending patches needing review on the
project web site. The page template in git just holds a pointer
to the web page.
Although it should be harmless to do:
disk = disk = def->disks[i]
some not-so-wise compilers may fool around.
Besides, such assignment is useless here.
On newer xend (v3.x and after) there is no state and domid reported
for inactive domains. When initially creating connections this is
handled in various places by assigning domain->id = -1.
But once an instance has been running, the id is set to the current
domain id. And it does not change when the instance is shut down.
So when querying the domain info, the hypervisor driver, which gets
asked first will indicate it cannot find information, then the
xend driver is asked and will set the status to NOSTATE because it
checks for the -1 domain id.
Checking domain/status for 0 seems to be more reliable for that.
One note: I am not sure whether the domain->id also should get set
back to -1 whenever any sub-driver thinks the instance is no longer
running.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=746007
BugLink: http://bugs.launchpad.net/bugs/929626
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch adds a netlink callback when migrating a VEPA enabled
virtual machine. It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.
This patch requires the latest git version of lldpad to work.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
If dynamic_ownership is off and we are creating a file on NFS
we force chown. This will fail as chown/chmod are not supported
on NFS. However, with no dynamic_ownership we are not required
to do any chown.
* daemon/libvirtd-config.c (daemonConfigFree): fix memory leaks.
How to reproduce?
% make && make -C tests check TESTS=libvirtdconftest
% cd tests && valgrind -v --leak-check=full ./libvirtdconftest
actual result:
==11008== 185 bytes in 5 blocks are definitely lost in loss record 3 of 5
==11008== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==11008== by 0x39CF07F6E1: strdup (strdup.c:43)
==11008== by 0x406626: daemonConfigLoadOptions (libvirtd-config.c:438)
==11008== by 0x406800: daemonConfigLoadData (libvirtd-config.c:492)
==11008== by 0x403CCF: testCorrupt (libvirtdconftest.c:110)
==11008== by 0x404FAD: virtTestRun (testutils.c:145)
==11008== by 0x403A34: mymain (libvirtdconftest.c:219)
==11008== by 0x404687: virtTestMain (testutils.c:700)
==11008== by 0x39CF01ECDC: (below main) (libc-start.c:226)
==11008==
==11008== LEAK SUMMARY:
==11008== definitely lost: 185 bytes in 5 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
In my testing, I was able to provoke an odd block pull failure:
$ virsh blockpull dom vda --bandwidth 10000
error: Requested operation is not valid: No active operation on device: drive-virtio-disk0
merely by using gdb to artifically wait to do the block job set speed
until after the pull had already finished. But in reality, that should
be a success, since the pull finished before we had a chance to set
speed. Furthermore, using a double job lock is not only annoying, but
a bug in itself - if you do parallel virDomainBlockRebase, and hit
the race window just right, the first call grabs the VM job to start
a fast block job, then the second call grabs the VM job to start
a long-running job with unspecified speed, then the first call finally
regrabs the VM job and sets the speed, which ends up running the
second job under the speed from the first call. By consolidating
things into a single job, we avoid opening that race, as well as reduce
the time between starting the job and changing the speed, for less
likelihood of the speed change happening after block job completion
in the first place.
* src/qemu/qemu_monitor.h (BLOCK_JOB_CMD): Add new mode.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Move secondary
job call...
(qemuDomainBlockJobImpl): ...here, for fewer locks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Change
return value on new internal mode.
Without the VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag, libvirt will internally
poll using qemu's "query-block-jobs" API and will not return until the
operation has been completed. API users are advised that this operation
is unbounded and further interaction with the domain during this period
may block. Future patches may refactor things to allow other queries in
parallel with this polling. For older qemu, we synthesize the cancellation
event, since qemu won't generate it.
The choice of polling duration copies from the code in qemu_migration.c.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Probably in the noise, but this will let us scale more efficiently
as we learn to recognize even more qemu events.
* src/qemu/qemu_monitor_json.c (eventHandlers): Sort.
(qemuMonitorEventCompare): New helper function.
(qemuMonitorJSONIOProcessEvent): Optimize event lookup.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
RHEL 6.2 was released with an early version of block jobs, which only
worked on the qed file format, where the commands were spelled with
underscore (contrary to QMP style), and where 'block_job_cancel' was
synchronous and did not trigger an event.
The upcoming qemu 1.1 release has fixed these short-comings [1][2]:
the commands now work on multiple file types, are spelled with dash,
and 'block-job-cancel' is asynchronous and emits an event upon conclusion.
[1]qemu commit 370521a1d6f5537ea7271c119f3fbb7b0fa57063
[2]https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg01248.html
This patch recognizes the new spellings, and fixes virDomainBlockRebase
to give a graceful error when talking to a too-old qemu on a partial
rebase attempt. Fixes for the new semantics will come later. This
patch also removes a bogus ATTRIBUTE_NONNULL mistakenly added in
commit 10ec36e2.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC)
(QEMU_CAPS_BLOCKJOB_ASYNC): New bits.
* src/qemu/qemu_capabilities.c (qemuCaps): Name them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
them.
(qemuMonitorJSONBlockJob): Manage both command names.
(qemuMonitorJSONDiskSnapshot): Minor formatting fix.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Alter signature.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Pass through
capability bit.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update callers.
The new safe console handling introduced a possibility to deadlock the
qemu driver when a new console connection forcibly disconnects a
previous console stream that belongs to an already closed connection.
The virStreamFree function calls subsequently a the virReleaseConnect
function that tries to lock the driver while discarding the connection,
but the driver was already locked in qemuDomainOpenConsole.
Backtrace of the deadlocked thread:
0 0x00007f66e5aa7f14 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f66e5aa3411 in _L_lock_500 () from /lib64/libpthread.so.0
2 0x00007f66e5aa322a in pthread_mutex_lock () from/lib64/libpthread.so.0
3 0x0000000000462bbd in qemudClose ()
4 0x00007f66e6e178eb in virReleaseConnect () from/usr/lib64/libvirt.so.0
5 0x00007f66e6e19c8c in virUnrefStream () from /usr/lib64/libvirt.so.0
6 0x00007f66e6e3d1de in virStreamFree () from /usr/lib64/libvirt.so.0
7 0x00007f66e6e09a5d in virConsoleHashEntryFree () from/usr/lib64/libvirt.so.0
8 0x00007f66e6db7282 in virHashRemoveEntry () from/usr/lib64/libvirt.so.0
9 0x00007f66e6e09c4e in virConsoleOpen () from /usr/lib64/libvirt.so.0
10 0x00000000004526e9 in qemuDomainOpenConsole ()
11 0x00007f66e6e421f1 in virDomainOpenConsole () from/usr/lib64/libvirt.so.0
12 0x00000000004361e4 in remoteDispatchDomainOpenConsoleHelper ()
13 0x00007f66e6e80375 in virNetServerProgramDispatch () from/usr/lib64/libvirt.so.0
14 0x00007f66e6e7ae11 in virNetServerHandleJob () from/usr/lib64/libvirt.so.0
15 0x00007f66e6da897d in virThreadPoolWorker () from/usr/lib64/libvirt.so.0
16 0x00007f66e6da7ff6 in virThreadHelper () from/usr/lib64/libvirt.so.0
17 0x00007f66e5aa0c5c in start_thread () from /lib64/libpthread.so.0
18 0x00007f66e57e7fcd in clone () from /lib64/libc.so.6
* src/qemu/qemu_driver.c: qemuDomainOpenConsole()
-- unlock the qemu driver right after acquiring the domain
object
In case an API fails with "cannot acquire state change lock", searching
for the API that possibly forgot to end its job is not always easy.
Let's keep track of the job owner and print it out for easier
identification.
As reported by Daniel Berrangé, we have a huge performance regression
for virDomainGetInfo() due to the change which makes virDomainEndJob()
save the XML status file every time it is called. Previous to that
change, 2000 calls to virDomainGetInfo() took ~2.5 seconds. After that
change, 2000 calls to virDomainGetInfo() take 2 *minutes* 45 secs.
We made the change to be able to recover from libvirtd restart in the
middle of a job. However, only destroy and async jobs are taken care of.
Thus it makes more sense to only save domain state XML when these jobs
are started/stopped.
I noticed these compiler warnings when building for the s390 architecture.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Mark unused variable.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Avoid unused variable.
* src/qemu/qemu_command.c: Wire up -bios with <loader>
* tests/qemuxml2argvdata/qemuxml2argv-bios.args,
tests/qemuxml2argvdata/qemuxml2argv-bios.xml: Expand
existing BIOS test case to cover <loader>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
