use virNetworkRouteDefFree() instead of VIR_FREE to free routes, otherwise
the element 'family' would not be freed.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
use cleanup instead of error, so that the allocated strings could also get freed
when there's no error.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
This hash table will contain the same data as already existing one.
The only difference is that while the first table uses domain uuid as
key, the new table uses domain name. This will allow much faster (and
lockless) lookups by domain name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In one of my previous patches (b68a56bcfe) I made class_id to
format more frequently. Well, now it's formatting way too
frequent - even for regular active XML. Users don't need to see
it, so lets format it only for the status XML where it's really
needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
After a360912179 the formatting of virDomainActualNetDefPtr was
changed a bit. However, during the function rewrite, iface's class_id
is not formatted as frequently as it could be. In fact, after rewrite
it's formatted only for iface of type VIR_DOMAIN_NET_TYPE_DIRECT where
it makes no sense and is unused. While where needed (_TYPE_NETWORK) is
not formatted at all. This makes the daemon forget it upon daemon
restart resulting in bad behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the code to parse the vcpupin in a similar way the iothreadpin
code is now structured. This allows to get rid of some very strange
conditions and error messages.
Additionally since a existing bug
( https://bugzilla.redhat.com/show_bug.cgi?id=1208434 ) allows to add
vcpupin definitions for vcpus that don't exist, this patch makes the
parser to ignore all vcpupins that don't have a matching vCPU in the
definition rather than just offlined ones.
Defining a domain with the following config:
<domain ...>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin cpuset='1'/>
will result in the following config formatted back:
<domain type='kvm'>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin iothread='0' cpuset='1'/>
After restart the VM would vanish. Since our schema requires the
@iothread field to be present in <iothreadpin> make it required by the
code too.
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
We should add input devices with proper bus,
not VIR_DOMAIN_INPUT_BUS_XEN.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle input devices in virDomainDefParseXML properly
in case of parallels containers and VMs.
Parallels containers support only
VIR_DOMAIN_INPUT_BUS_PARALLELS. And if VNC is enabled
we should add implicit mouse and keyboard.
For VMs we should add implicit PS/2 mouse and
keyboard.
BTW, is it worth to refactor code and move
all this code to drivers, to *DomainDefPostParse
functions?
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add VIR_DOMAIN_INPUT_BUS_PARALLELS device type
to handle domain configuration properly for
parallels containers, when VNC is enabled.
When domain configuration has at least one
'graphics', there should be mouse and keyboard.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix function virDomainVideoDefaultType for
parallels VMs and containers. It should return
VGA for VMs and VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for containers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c719101e5bfa6fe2b78006ad04c7f075ea28
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Previously we had to check for 3 fields to see if the source was filled.
Repurpose one of the variables as a boolean flag and use it instead of
combining multiple sources.
For the condition that checks that only CDROM/FLOPPY drives can be empty
we can use the virStorageSourceIsEmpty() helper.
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
