LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly use 'priv->allowReboot' as we now document what the behaiour is
to avoid another lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save further readers the headache of determining what it actually does
and note that it's not used with qemu version supporting the
'set-action' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Again, we don't need full driver, just its config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't really need domain object, but domain
definition from which it takes seclabels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function doesn't modify passed video definition. Make the
argument const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The logic assigning the bootindices from the legacy boot order
configuration was spread through the command line formatters for the
disk device and for the floppy controller.
This patch adds 'effectiveBootindex' property to the disk private data
which holds the calculated boot index and moves the logic of determining
the boot index into 'qemuProcessPrepareDomainDiskBootorder' called from
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Later patches will implement support for <transient/> disks in libvirt
by installing an overlay on top of the configured image. This will
require cleanup after the VM will be stopped so that the state is
correctly discarded.
Since the overlay will be installed only during the startup phase of the
VM we need to ensure that qemuProcessStop doesn't delete the original
file on some previous failure. This is solved by adding
'inhibitDiskTransientDelete' VM private data member which is set prior
to any startup step and will be cleared once transient disk overlays are
established.
Based on that we can then delete the overlays for any <transient/> disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function is no longer used once we setup per-hostdev data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've prepared secrets for all objects in one place. This
doesn't make much sense and it's semantically more appealing to prepare
everything for a single device type in one place.
Move the setup of the (iSCSI|SCSI) hostdev secrets into a new function
which will be used to setup other things as well in the future.
This is a similar approach we do for disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the recent changes, this function is now always returning
zero. Turn it to 'void' to relieve callers from checking it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use it outside of qemu_domain.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4362068979 moved the function to
util/virqemu.c which is compiled also on win32 and geteuid()/getegid()
doesn't exist there.
Move it to qemu_domain.c which is compiled only when the qemu driver is
enabled. Originally I didn't want to put it here as qemu_domain.c is a
code dump for helper functions but this is the least invasive fix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as we check the domain
state after closing the wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as the permissions are
based on the domain configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Functions `qemuDomainRemoveInactiveJob` and
`qemuDomainRemoveInactiveJobLocked` had their declaration misplaced in
`qemu_domainjob` and were moved to `qemu_domain` where their definitions
reside.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To remove dependecy of `qemuDomainJob` on job specific
paramters, a `privateData` pointer is introduced.
To handle it, structure of callback functions is
also introduced.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a helper which will always return the storage source private data
even if it was not allocated before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions `qemuDomainObjInitJob`, `qemuDomainObjResetJob`,
`qemuDomainObjResetAgentJob`, `qemuDomainObjResetAsyncJob`,
`qemuDomainObjFreeJob`, `qemuDomainJobAllowed`,
`qemuDomainNestedJobAllowed` we avoid sending the complete
qemuDomainObjPrivatePtr as parameter and instead just send
qemuDomainJobObjPtr.
This is done in a effort to separating the qemu-job APIs into
a spearate file.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt allows the user to define an incomplete NUMA topology, where
the sum of all CPUs in each cell is less than the total of VCPUs.
What ends up happening is that QEMU allocates the non-enumerated CPUs
in the first NUMA node. This behavior is being flagged as 'to be
deprecated' at least since QEMU commit ec78f8114bc4 ("numa: use
possible_cpus for not mapped CPUs check").
In [1], Maxiwell suggested that we forbid the user to define such
topologies. In his review [2], Peter Krempa pointed out that we can't
break existing guests, and suggested that Libvirt should emulate the
QEMU behavior of putting the remaining vCPUs in the first NUMA node
in these cases.
This patch implements Peter Krempa's suggestion. Since we're going
to most likely end up with disjointed NUMA configuration in node 0
after the auto-fill, we're making auto-fill dependent on QEMU_CAPS_NUMA.
A following patch will update the documentation not just to inform
about the auto-fill mechanic with incomplete NUMA topologies, but also
to discourage the user to create such topologies in the future. This
approach also makes Libvirt independent of whether QEMU changes
its current behavior since we're either auto-filling the CPUs in
node 0 or the user (hopefully) is aware that incomplete topologies,
although supported in Libvirt, are to be avoided.
[1] https://www.redhat.com/archives/libvir-list/2019-June/msg00224.html
[2] https://www.redhat.com/archives/libvir-list/2019-June/msg00263.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We still have to use -drive to instantiate sd disks. Combining that with
the new logic for blockjobs would be very complicated and not worth it
given that 'sd' cards work only on few rarely used machine types of
non-common architectures and libvirt didn't implement support for 'sd'
bus controllers. This will allow us to use -blockdev for other kinds on
such machines while sacrificing block jobs.
Note: this is currently no-op as we mask-out the QEMU_CAPS_BLOCKDEV
capability if any of the disks has bus='sd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The field can be used by jobs to add an optional error message to a
completed (failed) job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In order to add a string to qemuDomainJobInfo we must ensure that it's
freed and copied properly. Add helpers to copy and free the structure
and adjust the code to use them properly for the new semantics.
Additionally also allocation is changed to g_new0 as it includes the
type and thus it's very easy to grep for all the allocations of a given
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Helper processes may have their state migrated with QEMU data stream
thanks to the QEMU "dbus-vmstate".
libvirt maintains the list of helpers to be migrated. The
"dbus-vmstate" is added when required, and given the list of helper
Ids that must be migrated, on save & load sides.
See also:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus-vmstate.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The http cookies can have potentially sensitive values and thus should
not be leaked into the command line. This means that we'll need to
instantiate a 'secret' object in qemu to pass the value encrypted.
This patch adds infrastructure for storing of the alias in the status
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using a double pointer prevents the function from being used as the
automatic cleanup function for the given type.
Remove the double pointer use by replacing the calls with
g_clear_pointer which ensures that the pointer is cleared.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The event loop thread will be responsible for handling
any per-domain I/O operations, most notably the QEMU
monitor and agent sockets.
We start this event loop when launching QEMU, but stopping
the event loop is a little more complicated. The obvious
idea is to stop it in qemuProcessStop(), but if we do that
we risk loosing the final events from the QEMU monitor, as
they might not have been read by the event thread at the
time we tell the thread to stop.
The solution is to delay shutdown of the event thread until
we have seen EOF from the QEMU monitor, and thus we know
there are no further events to process.
Note that this assumes that we don't have events to process
from the QEMU agent.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When preparing images for block jobs we modify their seclabels so
that QEMU can open them. However, as mentioned in the previous
commit, secdrivers base some it their decisions whether the image
they are working on is top of of the backing chain. Fortunately,
in places where we call secdrivers we know this and the
information can be passed to secdrivers.
The problem is the following: after the first blockcommit from
the base to one of the parents the XATTRs on the base image are
not cleared and therefore the second attempt to do another
blockcommit fails. This is caused by blockcommit code calling
qemuSecuritySetImageLabel() over the base image, possibly
multiple times (to ensure RW/RO access). A naive fix would be to
call the restore function. But this is not possible, because that
would deny QEMU the access to the base image. Fortunately, we
can use the fact that seclabels are remembered only for the top
of the backing chain and not for the rest of the backing chain.
And thanks to the previous commit we can tell secdrivers which
images are top of the backing chain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1803551
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The function has no users now and there's no need for it as the common
pattern is to look up the whole disk object anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are more places which require getting the topmost nodename to be
passed to qemu. Separate it out into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function potentially grabs both a monitor job and an agent job at
the same time. This is problematic because it means that a malicious (or
just buggy) guest agent can cause a denial of service on the host. The
presence of this function makes it easy to do the wrong thing and hold
both jobs at the same time. All existing uses have already been removed
by previous commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we use fake reboot then domain goes thru running->shutdown->running
state changes with shutdown state only for short period of time. At
least this is implementation details leaking into API. And also there is
one real case when this is not convinient. I'm doing a backup with the
help of temporary block snapshot (with the help of qemu's API which is
used in the newly created libvirt's backup API). If guest is shutdowned
I want to continue to backup so I don't kill the process and domain is
in shutdown state. Later when backup is finished I want to destroy qemu
process. So I check if it is in shutdowned state and destroy it if it
is. Now if instead of shutdown domain got fake reboot then I can destroy
process in the middle of fake reboot process.
After shutdown event we also get stop event and now as domain state is
running it will be transitioned to paused state and back to running
later. Though this is not critical for the described case I guess it is
better not to leak these details to user too. So let's leave domain in
running state on stop event if fake reboot is in process.
Reconnection code handles this patch without modification. It detects
that qemu is not running due to shutdown and then calls qemuProcessShutdownOrReboot
which reboots as fake reboot flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This will allow us to g_autoptr qemuDomainLogContext pointers
in the following patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all callers of qemuDomainGetHostdevPath() handle
/dev/vfio/vfio on their own, we can safely drop handling in this
function. In near future the decision whether domain needs VFIO
file is going to include more device types than just
virDomainHostdev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function is now used only in qemu_process.c so move it there and
name it 'qemuProcessPrepareQEMUCaps' which is more appropriate to what
it's doing.
The reworded comment now mentions that it will also post-process the
caps for VM startup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper which will covert the PFLASH code file and variable file
into the virStorageSource objects stored in private data so that we can
use them with -blockdev while keeping the infrastructure to determine
the path to the loaders intact.
This is a temporary solution until we will want to do snapshots of the
pflash where we will be forced do track the full backing chain in the
XML.
In the meanwhile just convert it partially so that we can stop using
-drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow converting the pflash drives to blockdev we will need a
virStorageSource to allow using our helpers. Temporarily prior to
coverting loader data to a virStorageSoruce add private data which will
house this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The pconfig feature was enabled in QEMU by accident in 3.1.0. All other
newer versions do not support it and it was removed from the
Icelake-Server CPU model in QEMU.
We don't normally change our CPU models even when QEMU does so to avoid
breaking migrations between different versions of libvirt. But we can
safely do so in this specific case. QEMU never supported enabling
pconfig so any domain which was able to start has pconfig disabled.
With a small compatibility hack which explicitly disables pconfig when
CPU model equals Icelake-Server in migratable domain definition, only
one migration scenario stays broken (and there's nothing we can do about
it): from any host to a host with libvirt < 5.10.0 and QEMU > 3.1.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1749672
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
When undefining a UEFI domain its nvram file has to be properly handled as
well. It's mandatory to use one of --nvram and --keep-nvram options when
'virsh undefine <domain>' is issued for a UEFI domain. To fix the bug as
reported, virsh should return an error message if neither option is used
and the nvram file should be removed when --nvram is given.
The cause of the problem is that when qemuDomainUndefineFlags() is invoked
on an inactive domain the path to its nvram file is empty. This commit
aims to fix this by formatting and filling in the path in time for the
nvram removal code to run properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1751596
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than having to fix 5 places once we support the combination, add
a function called by all the blockjob/snapshot APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Finish the refactor by moving and renaming functions from qemu_domain.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move it to qemu_domain.c and rename it to qemuDomainObjFromDomain. This
will allow reusing it after splitting out checkpoint code from
qemu_driver.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the qemu_tpm.c, add a unit with a few functions to
start/stop and setup the cgroup of the external vhost-user-gpu
process. See function documentation.
The vhost-user connection fd is set on qemuDomainVideoPrivate struct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For VM started and migrated/saved without slirp-helpers, let's prevent
the automatic setup (as it would fail to migrate otherwise).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save & restore the slirp helper PID associated with a network
interface & the probed features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
