Though they are the same thing, mixed use of them is uncomfortable.
"unsigned" is used a lot in old codes, this just tries to change the
ones in utils.
Commit 9a3ff01d7f16cc280ce3176620c0714f55511a65 (which was ACKed at
the end of January, but for some reason didn't get pushed until during
the 1.0.4 freeze) fixed the logic in virPCIGetVirtualFunctions().
Unfortunately, a typo in the fix (replacing VIR_REALLOC_N with
VIR_ALLOC_N during code movement) caused not only a memory leak, but
also resulted in most of the elements of the result array being
replaced with NULL. virNetDevGetVirtualFunctions() assumed (and I think
rightly so) that virPCIGetVirtualFunctions() wouldn't return any NULL
elements in the array, so it ended up segfaulting.
This was found when attempting to use a virtual network with an
auto-created pool of SRIOV VFs, e.g.:
<forward mode='hostdev' managed='yes'>
<pf dev='eth4'/>
</forward>
(the pool of PCI addresses is discovered by calling
virNetDevGetVirtualFunctions() on the PF dev).
Even though http://libvirt.org/formatdomain.html#elementsMetadata
states that it requires RFC4122 compliance UUIDs that are generated
by virUUIDGenerate() are not. Following patch modifies generated
UUIDs to conform to rules described in RFC.
Signed-off-by: Milos Vyletel <milos.vyletel@sde.cz>
The virCgroupMounted method is badly named, since a controller can be
mounted, but disabled in the current object. Rename the method to be
virCgroupHasController. Also make it tolerant to a NULL virCgroupPtr
and out-of-range controller index, to avoid duplication of these
checks in all callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
The current way virObject instances are allocated using
VIR_ALLOC_N causes alignment warnings
util/virobject.c: In function 'virObjectNew':
util/virobject.c:195:11: error: cast increases required alignment of target type [-Werror=cast-align]
Changing to use VIR_ALLOC_VAR will avoid the need todo
the casts entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements
util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)*recvbuf;
^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)recvbuf;
Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Playing games with field offsets in a struct causes all sorts
of alignment warnings on ARM platforms
util/virkeycode.c: In function '__virKeycodeValueFromString':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:91:28: note: in expansion of macro 'getfield'
const char *name = getfield(virKeycodes + i, const char *, name_offset);
^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:94:20: note: in expansion of macro 'getfield'
return getfield(virKeycodes + i, unsigned short, code_offset);
^
util/virkeycode.c: In function '__virKeycodeValueTranslate':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:127:13: note: in expansion of macro 'getfield'
if (getfield(virKeycodes + i, unsigned short, from_offset) == key_value)
^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:128:20: note: in expansion of macro 'getfield'
return getfield(virKeycodes + i, unsigned short, to_offset);
There is no compelling reason to use a struct for the keycode
tables. It can easily just use an array of arrays instead,
avoiding all alignment problems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.
Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Raspberry Pi runs the armv6l architecture and apparently
people are trying to run libvirt LXC on it. So we should allow
that as a valid arch
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Format the address using the helper instead of having similar code in
multiple places.
This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
iptables-1.4.18 removed the long deprecated "state" match.
Use "conntrack" instead in forwarding rules.
Fixes openSUSE bug https://bugzilla.novell.com/811251#811251.
When we write a log message into a log, we separate thread ID from
timestamp using ": ". However, when storing the message into the ring
buffer, we omitted the separator, e.g.:
2013-02-27 11:49:11.852+00003745: ...
virPCIGetVirtualFunctions returns 0 even if there is no "virtfn"
entry under the device sysfs path.
And virPCIGetVirtualFunctions returns -1 when it fails to get
the PCI config space of one VF, however, with keeping the
the VFs already detected.
That's why udevProcessPCI and gather_pci_cap use logic like:
if (!virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions) ||
data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
to tag the PCI device with "virtual_function" cap.
However, this results in a VF will aslo get "virtual_function" cap.
This patch fixes it by:
* Ignoring the VF which has failure of getting PCI config space
(given that the successfully detected VFs are kept , it makes
sense to not give up on the failure of one VF too) with a warning,
so virPCIGetVirtualFunctions will not return -1 except out of memory.
* Free the allocated *virtual_functions when out of memory
And thus the logic can be changed to:
/* Out of memory */
int ret = virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions);
if (ret < 0 )
goto out;
if (data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
This abstracts nodeDeviceVportCreateDelete as an util function
virManageVport, which can be further used by later storage patches
(to support persistent vHBA, I don't want to create the vHBA
using the public API, which is not good).
This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.
* src/util/virutil.h:
- Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
- Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
- Remove check_capable_vport_linux
- Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
- Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".
"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.
So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).
* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)
Some code mistakenly called virIdentityOnceInit directly
instead of virIdentityInitialize(). This meant that one-time
initializer was run many times with predictably bad results.
The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
If no user identity is available, some operations may wish to
use the system identity. ie the identity of the current process
itself. Add an API to get such an identity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow any internal API to get the current identity, add APIs
to associate a virIdentityPtr with the current thread, via a
thread local
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.
* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
My commit 7a2e845a865dc7fa82d2393ea2a770cfc8cf00b4 (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.
Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
In debug mode, the bug failed to start vm
error: Failed to start domain rhel5u9
error: internal error Out of space while reading console log output:
...
Add a virThreadCancel function. This functional is inherently
dangerous and not something we want to use in general, but
integration with SELinux requires that we provide this stub.
We leave out any Win32 impl to discourage further use and
because obviously SELinux isn't enabled on Win32
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When reading log output from QEMU/LXC we need to skip over any
libvirt log messages. Currently the QEMU driver checks for a
fixed string, but this is better done with a regex. Add a method
virLogProbablyLogMessage to do a regex check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNetDevSetupControlFull function was protected by a
conditional on SIOCBRADDBR, which is bogus since it does
not use that symbol. Update the conditionals around all
callers to do stricter checks to ensure we always build
succesfully
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The RHEL4 vintage header files do not define GET_VLAN_VID_CMD.
Conditionally define it in our source, since the kernel can
raise a runtime error if it isn't supported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The loop.h on RHEL4 is broken and cannot be imported. We already
detect this in configure as a side-effect of looking for whether
LO_FLAGS_AUTOCLEAR is available. We protected the impl with
HAVE_DECL_LO_FLAGS_AUTOCLEAR, but not the header import
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
