QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory
Enable this timestamp if the QEMU binary supports it.
Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.
This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
Recent discussions around naming of 'pci' vs 'pci.0' for PPC
made me go back and look at the PPC emulator in every historical
version of QEMU since 1.0. The results were worse than I imagined.
This patch adds the logic required to make libvirt work with PPC
correctly with naming variations across all versions & machine
types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extracting capabilities from QEMU takes a notable amount of time
when all QEMU binaries are installed. Each system emulator
needs about 200-300ms multiplied by 26 binaries == ~5-8 seconds.
This change causes the QEMU driver to save an XML file containing
the content of the virQEMUCaps object instance in the cache
dir eg /var/cache/libvirt/qemu/capabilities/$SHA256(binarypath).xml
or $HOME/.cache/libvirt/qemu/cache/capabilities/$SHA256(binarypath).xml
We attempt to load this and only if it fails, do we fallback to
probing the QEMU binary. The ctime of the QEMU binary and libvirtd
are stored in the cached file and its data discarded if either
of them change.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch detects if QEMU supports this option, and add
a capability if does.
Signed-off-by: Francesco Romani <fromani@redhat.com>
On a system that is enforcing FIPS, most libraries honor the
current mode by default. Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux. So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting. Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).
The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu. Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=888635
(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).
Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.
The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
This basically covers the talking-to-monitor part of
virQEMUCapsInitQMP. The patch itself has no real value,
but it creates an entity to be tested in the next patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
QEMU ARM boards don't give us any way to explicitly wire in
a -chardev, so use the old style -serial options.
Unfortunately this isn't as simple as just turning off the CHARDEV flag
for qemu-system-arm, as upcoming virtio support _will_ use device/chardev.
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
* src/qemu/qemu_capabilities.h: New capability bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsProbeQMPCommandLine): New
function, based on qemuMonitorGetCommandLineOptionParameters, which was
introduced by commit bd56d0d813; use it to set new capability bit.
(virQEMUCapsInitQMP): Use new function.
Adding two cap flags for scsi-generic:
QEMU_CAPS_SCSI_GENERIC
QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is
supported in the qemu binary.
QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports
the "bootindex" parameter; for some reason, the bootindex parameter
wasn't included in early versions of vfio support (qemu 1.4) so we
have to check for it separately from vfio itself.
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Check for QMP query-tpm-models and set a capability flag. Do not use
this QMP command if it is not supported.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Probe for QEMU's QMP TPM support by querying the lists of
supported TPM models (query-tpm-models) and backend types
(query-tpm-types).
The setting of the capability flags following the strings
returned from the commands above is only provided in the
patch where domain_conf.c gets TPM support due to dependencies
on functions only introduced there.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This commit adds the QEMU driver support for CCW addresses. The
current QEMU only allows virtio devices to be attached to the
CCW bus. We named the new capability indicating that support
QEMU_CAPS_VIRTIO_CCW accordingly.
The fact that CCW devices can only be assigned to domains with a
machine type of s390-ccw-virtio requires a few extra checks for
machine type in qemu_command.c on top of querying
QEMU_CAPS_VIRTIO_{CCW|S390}.
The majority of the new functions deals with CCW address generation
and management.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch adds a new capability bit QEMU_CAPS_OBJECT_RNG_EGD and code
to support the egd backend for the VirtIO RNG device.
The device is added by 3 qemu command line options:
-chardev socket,id=charrng0,host=1.2.3.4,port=1234 (communication
backend)
-object rng-egd,chardev=charrng0,id=rng0 (RNG protocol client)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (the RNG device)
This patch implements support for the virtio-rng-pci device and the
rng-random backend in qemu.
Two capabilities bits are added to track support for those:
QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and
QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support.
qemu is invoked with these additional parameters if the device is
enabled:
-object rng-random,id=rng0,filename=/test/phile (to add the backend)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for QEMU -add-fd command line parameter detection.
This intentionally rejects qemu 1.2, where 'add-fd' QMP did
not allow full control of set ids, and where there was no command
line counterpart, but accepts qemu 1.3.
Signed-off-by: Eric Blake <eblake@redhat.com>
This previous commit
commit 1a50ba2cb0
Author: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Date: Mon Nov 26 15:17:13 2012 +0100
qemu: Fix QMP Capabability Probing Failure
which attempted to make sure the QEMU process used for probing
ran as the right user id, caused serious performance regression
and unreliability in probing. The -daemonize switch in QEMU
guarantees that the monitor socket is present before the parent
process exits. This means libvirtd is guaranteed to be able to
connect immediately. By switching from -daemonize to the
virCommandDaemonize API libvirtd was no longer synchronized with
QEMU's startup process. The result was that the QEMU monitor
failed to open and went into its 200ms sleep loop. This happened
for all 25 binaries resulting in 5 seconds worth of sleeping
at libvirtd startup. In addition sometimes when libvirt connected,
QEMU would be partially initialized and crash causing total
failure to probe that binary.
This commit reverts the previous change, ensuring we do use the
-daemonize flag to QEMU. Startup delay is cut from 7 seconds
to 2 seconds on my machine, which is on a par with what it was
prior to the capabilities rewrite.
To deal with the fact that QEMU needs to be able to create the
pidfile, we switch pidfile location fron runDir to libDir, which
QEMU is guaranteed to be able to write to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
