When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.
Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338
This reverts commit 94b3aa55f8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general snapshot and checkpoint APIs were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefParseNode.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to virDomainDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to virDomainDefParseString.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuMigrationAnyPrepareDef.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainSaveImageOpen.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefFormatBufInternal.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If virQEMUDriverGetCapabilities returns NULL, then a subsequent
deref of @caps would cause an error, so we just return failure.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it's just a helper for building a qemu virDomainCapsPtr,
used in qemuConnectGetDomainCapabilities
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This way it is obvious when adding a new resource control type
that stats helper func needs to be updated too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the host doesn't have resctrl then the monitor is going to be
NULL and we must avoid dereferencing it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities object must be unrefed when no longer needed.
Use VIR_AUTOUNREF() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Export virResctrlMonitorGetStats and make
virResctrlMonitorGetCacheOccupancy obsoleted.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor 'virResctrlMonitorStats' to track multiple statistical
records.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor and rename 'virResctrlMonitorFreeStats' to
'virResctrlMonitorStatsFree' to free one
'virResctrlMonitorStatsPtr' object.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Earlier patches mentioned that the initial implementation will prevent
snapshots and checkpoints from being used on the same domain at once.
However, the actual restriction is done in this separate patch to make
it easier to lift that restriction via a revert, when we are finally
ready to tackle that integration in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Time to actually issue the QMP transactions that create and delete
persistent checkpoints, resolving TODOs intentionally left earlier in
the series. For create, we only need one transaction: inside, we
visit all disks affected by the checkpoint, and create a new enabled
bitmap, as well as disabling the bitmap of the first ancestor
checkpoint (if any) that also had a bitmap. For deletion, we need
multiple QMP calls: for each disk, if there is an ancestor checkpoint
with a bitmap, then the bitmap must be merged (including activating
the ancestor bitmap if the leaf node changes), all before deleting the
bitmap from the checkpoint being removed.
Signed-off-by: Eric Blake <eblake@redhat.com>
A lot of this work heavily copies from the existing snapshot APIs.
What's more, this patch is (intentionally) very similar to the
checkpoint code just added in the test driver, to the point that qemu
checkpoints are not fully usable in this patch, but it at least
bisects and builds cleanly. The separation between patches is done
because the grunt work of saving and restoring XML and tracking
relations between checkpoints is common to the test driver, while the
later patch adding integration with QMP is specific to qemu.
Also note that the interlocking to prevent checkpoints and snapshots
from existing at the same time will be a separate patch, to make it
easier to revert that restriction when we finally round out the design
for supporting interaction between the two concepts.
Signed-off-by: Eric Blake <eblake@redhat.com>
This is similar to the existing directory for snapshots; the domain
will save one xml file per checkpoint, for reloading on the next
libvirtd restart. Fortunately, since checkpoints mandate RNG
validation, we are assured that the checkpoint name will be usable as
a file name (no abuse of '../escape' as a checkpoint name, for
example).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.
This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainSnapshotDiskDataCollect copies the source of the disk from the
live config into the inactive config. Move this operation earlier so
that if we initialize it for use for the particular instance the
run-time-only data is not copied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The block commit API checked 'disk->src->path' to see whether there
is a reasonable disk source to be committed. As the top image can be
e.g. backed by NBD the check is not good enough. Replace it by
virStorageSourceIsEmpty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we track the job separately we watch only for the abort of the
one single block job so the comment is no longer accurate. Also
describing asynchronous operation is not really necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev:
- we track the job and check it after restart
- have the ability to ask qemu to persist it to collect result
- have the ability to report errors.
This solves all points the comment outlined so remove it. Also all jobs
handle the disk state modification along with the event so there's
nothing special the comment says.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use job-complete/job-abort instead of the blockjob-* variants for
blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the error message is now available and we know whether the job failed
we can report an error straight away rather than having the user check
the event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set the correct job states after the operation is requested in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Do decisions based on the configuration of the job rather than the data
stored with the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the stored job name rather than passing in the disk alias when
referring to the job which allows the same code to work also when
-blockdev will be used.
Note that this API does not require the change to use 'query-job' as it
will ever only work with blockjobs bound to disks due to the arguments
which allow only referring to a disk. For the disk-less jobs we'll need
to add a separate API later.
The change to qemuMonitorGetBlockJobInfo is required as the API was
stripping the 'drive-' prefix when returning the data which is not
desired any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot. Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list. The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).
Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Report in logs when we don't find existing block job data and create it
just to handle the job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this function does start a block job in case when we'd not be able
to get our internal data for it, the handler sets the job state to
QEMU_BLOCKJOB_STATE_RUNNING anyways, thus qemuBlockJobStartupFinalize
would just unref the job.
Since the other usage of qemuBlockJobStartupFinalize in the other part
of the event handler was a bug replace this one anyways even if it would
not cause problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.
Add a helper for qemu to look also into the blockjob state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add separate booleans for extracting VIR_DOMAIN_BLOCK_COPY_REUSE_EXT and
VIR_DOMAIN_BLOCK_COPY_SHALLOW from '@flags' and also change 'reuse' into
'existing'.
qemuMonitorDriveMirror requires the unmodified state of the flags to
pass to qemu and also we use the value a few times internally. Extract
it separately now.
The 'reuse' flag did not indicate reusing of the file as much as the
fact that the storage is existing and thus should not be created, so
modify the name to reflect this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/qemu/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/qemu/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Calling virDomainObjUpdateModificationImpact directly inside the
function body is redundant, since the same function call is embedded
into virDomainObjGetOneDef.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The public API entry points will report VIR_ERR_NO_SUPPORT to the
caller when a driver does not provide an implementation of a particular
method.
When deleting methods, leaving the driver API entry point explicitly
set to NULL with an version range comment, allows the hvsupport.html
page to document when the AP was removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've deprecated qemuConnectDomainXMLFromNative qemuDomainQemuAttach.
Switch the error code from VIR_ERR_OPERATION_UNSUPPORTED to the new
VIR_ERR_DEPRECATED.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f34397e51c introduced a crash-inducing problem when collecting
disk snapshot data, where the array would be filled starting from the
second element.
The code then dereferenced the first one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainSaveImageGetXMLDesc API is taking a path parameter,
which can point to any path on the system. This file will then be
read and parsed by libvirtd running with root privileges.
Forbid it on read-only connections.
Fixes: CVE-2019-10161
Reported-by: Matthias Gerstner <mgerstner@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we no longer support the HMP monitor, remove some dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This code is really neglected and does not at all work reliably. It
can't even be used for converting our own commandline back.
Since this was mostly useful for aiding migration from manually run qemu
to libvirt and will not work for this puspose in many cases it's not
worth having.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attaching to modern qemu will not work with all this code and attempting
to ressurect it would be mostly pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit cbb4d229de I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.
Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the 'shallow' and 'reuse' flags as booleans rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the point when we want to modify the permissions for the 'mirror' we
know whether it is supposed to have a backing chain or no. Given that
mirror->backingStore is populated only when we'd need to touch it ayways
we can use qemuDomainStorageSourceChainAccessAllow even in place of
qemuDomainStorageSourceAccessAllow used for other cases to simplify the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One code path open-coded qemuDomainStorageSourceChainAccessAllow badly
and also did not integrate with the locking code.
Replace the separate calls with qemuDomainStorageSourceChainAccessAllow
which does everything internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 4e797f1a we parse backingStore of mirror which will later be used
with blockdev. Add some validation for the user passed mirror at the
current point to make sure it's not used improperly.
Validate that it's not used without blockdev and also that it's not
passed when not requesting a shallow copy. Also add a chain terminator
for a deep copy since we know the resulting mirror will not have chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessAllow revokes the
permissions it granted if it fails halfway, thus we can remove some
calls to qemuDomainStorageSourceAccessRevoke which tried to undo this
situation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessRevoke keeps the libvirt
error which was set prior to the call around even after the call, thus
we don't need to do the same when reverting access in the block copy
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When aborting or pivoting a block job we record which operation we do
for the mirror in the virDomainDiskDef structure. As everything is
synchronized by a job it's not necessary to modify the state prior to
calling the monitor and resetting the state on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All blockjobs get their status updated by events from qemu, so this code
no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit dfd70ca1eb.
Pushed by a mistake, sorry. There's still some discussion going
on upstream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Snapshot create operation saves the live XML and uses it to replace the
domain definition in case of revert. But the VM config XML is not saved
and the revert operation does not address this issue. This commit
prevents the config XML from being overridden by snapshot definition.
An active domain stores both current and new definitions. The current
definition (vm->def) stores the live XML and the new definition
(vm->newDef) stores the config XML. In an inactive domain, only the
config XML is persistent, and it's saved in vm->def.
The revert operation uses the virDomainObjAssignDef() to set the
snapshot definition in vm->newDef, if domain is active, or in vm->def
otherwise. But before that, it saves the old value to return to
caller. This return is used here to restore the config XML after
all snapshot startup process finish.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
This function gets snapshot XML (provided by used) as an
argument. It parses it into a local variable @def and then sets
some more members (e.g. it creates a copy of live domain XML).
Then it proceeds to checking if snapshot XML is valid (e.g. it
contains as many disks as currently in the domain). If this fails
then the control jumps to endjob label and subsequently return
from the function. This is where AUTOFREE function for @def is
ran. Well, because the code says to run plain VIR_FREE() we leak
some memory because @def is actually an object and therefore
it should have been declared as AUTOUNREF.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
After 65a372d6e0 the @cfg variable is no longer used. This means
we can drop it and therefore drop 'cleanup' label with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1697676
If an user tries to attach a device with colliding user alias
then we attach it happily and thus leave domain unable to start.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to live XML we don't care (well,
shouldn't care) that there's already a device in inactive XML
that has the same user alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we're attaching a device to both inactive and live XML then
@ret is overwritten which may result in incorrect return value.
For instance, if attaching to inactive XML succeeds, @ret is
assigned value of zero and control proceeds to attaching the
device to live XML. Here, if say
virDomainDeviceValidateAliasForHotplug() fails the control jumps
over to 'cleanup' label and zero is returned indicating success.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our coding style specifies that only negative values are considered as
error. Check for return value of virDomainDiskInsert() properly,
following the style. Not that the function can now return anything other
than 0 or -1, but it just triggers my OCD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the current QEMU guest can't wake up from suspend properly,
and we are able to determine that, avoid suspending the guest
at all. To be able to determine this support, QEMU needs to
implement the 'query-current-machine' QMP call. This is reflected
by the QEMU_CAPS_QUERY_CURRENT_MACHINE cap.
If the cap is enabled, a new function qemuDomainProbeQMPCurrentMachine
is called. This is wrapper for qemuMonitorGetCurrentMachineInfo,
where the 'wakeup-suspend-support' flag is retrieved from
'query-current-machine'. If wakeupSuspendSupport is true,
proceed with the regular flow of qemuDomainPMSuspendForDuration.
The absence of QEMU_CAPS_QUERY_CURRENT_MACHINE indicates that
we're dealing with a QEMU version older than 4.0 (which implements
the required QMP API). In this case, proceed as usual with the
suspend logic of qemuDomainPMSuspendForDuration, since we can't
assume whether the guest has support or not.
Fixes: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1759509
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
