These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the function to qemuValidateDomainVCpuTopology() to reflect
what it is currently doing as well.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have a lot of "if (usingVirtio)" checks being done while
constructing the NIC command line. Let's put all of them in
a single "if".
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Account for the possible SATA disks too, which means 120 potential
disks.
This means the size of the array triples, however that is unavoidable
with the current way of reading disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add it to the list of 'deviceType' values ignored for disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the private helpers for parsing and formatting of domain
elements as private static functions in vmx.c, to avoid using them
directly.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These variables seem to be left over from a previous refactoring and
they don't add anything to the code.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
...if a machine memory-backend using shared memory is configured for
the guest. This is especially important for QEMU machine types that
don't have NUMA but virtiofs support.
An example snippet:
<domain type='kvm'>
<name>test</name>
<memory unit='KiB'>2097152</memory>
<memoryBacking>
<access mode='shared'/>
</memoryBacking>
<devices>
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/tmp/test'/>
<target dir='coffee'/>
</filesystem>
...
</devices>
...
</domain>
and the corresponding QEMU command line:
/usr/bin/qemu-system-s390x \
-machine s390-ccw-virtio-5.2,memory-backend=s390.ram \
-m 2048 \
-object
memory-backend-file,id=s390.ram,mem-path=/var/lib/libvirt/qemu/ram/46-test/s390.ram,share=yes,size=2147483648 \
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables the free-page-reporting in qemu.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will add the proper documentation and parser support for the free page
reporting feature that is introduced in QEMU 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This helper changes the root qdisc on given interface.
Ideally, it would be written using netlink but my attempts to
write the code were not successful and thus I've fallen back to
virCommand() + tc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently setting max_len=0 causes virtlogd to spin in a busy loop. It
is natural to allow this to disable log rollover which can be useful for
developers debugging things.
Note disabling rollover exposes the host to denial of service from a
malicious guest, so must be used with care.
Closes https://gitlab.com/libvirt/libvirt/-/issues/85
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes commit <d5b05614dfbc9bd60ea1a31a9cc32aaf3c771ddc> which changed
allocation from VIR_ALLOC_N to g_new0 but missed one +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Fixes commit <a5d88ffe0ad9b5d5314ab0058c5b363f9f79b8ee> which changed
allocation from VIR_ALLOC_N to g_new0 but missed some +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If storage migration is requested, and the destination storage does
not exist on the remote host, qemu's migration support will call
into the libvirt storage driver to precreate the destination storage.
The storage driver virConnectPtr is opened too early though, adding
an unnecessary dependency on the storage driver for several cases
that don't require it. This currently requires kubevirt to install
the storage driver even though they aren't actually using it.
Push the virGetConnectStorage calls to right before the cases they are
actually needed.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim of virSocketAddrPrefixToNetmask() is to initialize passed
virSocketAddr structure based on prefix length and family.
However, it doesn't set all members in the struct which may lead
to reads of uninitialized values:
==15421== Use of uninitialised value of size 8
==15421== at 0x50F297A: _itoa_word (in /lib64/libc-2.31.so)
==15421== by 0x510C8FE: __vfprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x5120295: __vsnprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x50F8969: snprintf (in /lib64/libc-2.31.so)
==15421== by 0x51BB602: getnameinfo (in /lib64/libc-2.31.so)
==15421== by 0x496DEE0: virSocketAddrFormatFull (virsocketaddr.c:486)
==15421== by 0x496DD9F: virSocketAddrFormat (virsocketaddr.c:444)
==15421== by 0x11871F: networkDnsmasqConfContents (bridge_driver.c:1404)
==15421== by 0x1118F5: testCompareXMLToConfFiles (networkxml2conftest.c:48)
==15421== by 0x111BAF: testCompareXMLToConfHelper (networkxml2conftest.c:112)
==15421== by 0x112679: virTestRun (testutils.c:142)
==15421== by 0x111D09: mymain (networkxml2conftest.c:144)
==15421== Uninitialised value was created by a stack allocation
==15421== at 0x1175D2: networkDnsmasqConfContents (bridge_driver.c:1056)
All callers expect the function to initialize the structure
fully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Fixes: 8487595bee
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The original descirption for *_tls_x509_verify is a little misleading
by saying that "Enabling this option will reject any client who does
not have a ca-cert.pem certificate".
Signed-off-by: Fangge Jin <fjin@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This header's main purpose was to work around bugs in older versions of
openwsman. Most of the files using it only needed wsman-api.h, which
they now include directly.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bug fixes and comments specific to older versions have been removed.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Hyper-V version numbers are not compatible with the encoding in
virParseVersionString():
https://gitlab.com/libvirt/libvirt/-/blob/master/src/util/virutil.c#L246
For example, the Windows Server 2016 Hyper-V version is 10.0.14393: its
micro is over 14 times larger than the encoding allows.
This commit repacks the Hyper-V version number in order to preserve all
of the digits. The major and minor are concatenated (with minor zero-
padded to two digits) to form the repacked major value. This works
because Microsoft's major and minor versions numbers are unlikely to
exceed 99. The repacked minor value is derived from the digits in the
thousands, ten-thousands, and hundred-thousands places of Hyper-V's
micro. The repacked micro is derived from the digits in the ones, tens,
and hundreds places of Hyper-V's micro.
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CurrentTimeZone's type is a signed integer, not unsigned.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This eliminates some duplicate code and simplifies the driver functions.
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some CPU model names were too long for _virNodeInfo.model.
For example: Intel Xeon CPU E5-2620 v2 @ 2.10GHz
This commit removes the clock frequency suffix.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two specific WQL queries we're using to get either a list of
virtual machines or the hypervisor host itself from Msvm_ComputerSystem.
Those queries rely on filtering results based on the "Description"
field. Since the "Description" field is locale sensitive, the queries
will fail if the Windows host is using a language pack. While the WSMAN
spec allows the client to set the requested locale (and it is supported
since openwsman 2.6.x), the Windows WinRM service does not respect this
setting: it returns non-English strings despite the WSMAN request
properly setting the locale to 'en-US'. Therefore, this patch changes
the WQL query to make use of the "__SERVER" field to stop relying on
English strings in queries and side step the issue.
Co-authored-by: Dawid Zamirski <dzamirski@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_new0 for allocation and remove all the temporary
variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For readability, and to ensure we do allocation when
returning 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We only care about the first part of the 'ifname' string,
splitting it is overkill.
Instead, just replace the ':' with a '\0' in a copy of the string.
This reduces the count of the varaibles containing some form
of the interface name to two.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The error check for ValueObjectGet("return") is redundant,
qemuAgentCommand already checked for us that the reply contains
a "return" object.
It does not guarantee, that it is an array.
Use virJSONValueObjectGetArray that combines getting the object
with checking for its type and return the more helpful of
the two error messages.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Convert one interface from the "return" array returned by
"guest-network-get-interfaces" to virDomainInterface.
Due to the functionality of squashing interface aliases together,
this is not a pure function - it either:
* Adds the interface to ifaces_ret, incrementing ifaces_count
and adds a pointer to it into the ifaces_store hash table.
* Adds the additional IP addresses from the interface alias
to the existing interface entry, found through the hash table.
This does not increment ifaces_count or extend the array.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We have a local 'iface' variable that contains the same value
eventually. Initialize it early instead of indexing two more
times.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We're passing 'ifaces_count' to virHashCreate as the initial
hash table size just after we've initialized it to zero.
This translates to a default of 256 inside virHashCreateFull.
Instead of this obfuscation, use virHashNew (default of 32),
to make it obvious we don't care about the initial hash size.
Also remove the error handling, since neither of the functions
return any errors after switching to g_new0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This lets us conveniently reduce its scope to the outer loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
qemuAgentGetInterfaceOneAddress returns exactly one address
for every iteration of the loop (and we error out if not).
Instead of expanding the addrs by one on every iteration,
do it upfront since we know how many times the loop will
execute.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
For both 'ip_addr_arr' and 'ret_array', we:
1) already checked that they are arrays
2) only iterate up to the array size
Remove the duplicate checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
A function that takes one entry from the "ip-addresses" array
returned by "guest-network-get-interfaces" and converts it
into virDomainIPAddress.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
virJSONValueObjectGetArray returns NULL if the object with
the supplied key is not an array.
Calling virJSONValueIsArray right after is redundant.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Remove the pointless variable and pointer stealing.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The feature is filtered by KVM and never automatically enabled. So even
though QEMU definition of EPYC-Rome contains this feature, the guest
won't see it. Also domain capabilities will show it as disabled for KVM
domains. Thus the feature should not really be included in our
definition of EPYC-Rome.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Validation is usually performed on an entire document. If we are only
interested in validating a single nested node that can occur in
different contexts, this would require writing different schemas for
any of those different contexts.
By temporarily replacing the document's root node, we can validate the
relevant node only.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I left in a 'return' or 'goto cleanup' in a few places
where I did the conversion manually.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Modify virCPUarmCompare in cpu_arm.c to perform compare action.
This patch only adds host to host CPU compare, the rest cases
remains the same. This is useful for source and destination host
compare during migrations to avoid migration between different
CPU models that have different CPU freatures.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move them to separate conditions to reduce churn
in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Change the interface of esxUtil_ResolveHostname() to return a newly
allocated string with the result address, instead of forcing the callers
to provide a buffer and its size. This way we can simply (auto)free the
string, and make the function stacks smaller.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Call freeaddrinfo() as soon as @result is not needed anymore, i.e. right
after getnameinfo(); this avoids calling freeaddrinfo() in two branches.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Previous refactors allow us to plainly replace all VIR_FREE by g_free to
finish the modernization of the file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Restructure the control-flow a bit using an temporary variable to avoid
the need to use VIR_FREE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' and 'cleanup' labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing to get rid of the 'error' label. Since the
'tmp' variable was used only in one instance, rename it appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Register the the cleanup functions for 'qemuMigrationCookieGraphics',
'qemuMigrationCookieNetwork', 'qemuMigrationCookieNBD', and
'qemuMigrationCookieCaps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to automatic memory cleaning, use g_new0 for allocation and get
rid of the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code into 'qemuMigrationCookieNBDXMLFormat' and use modern XML
formatting code patterns.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'virXMLFormatElement' both for formating the whole <network> element
but also for formatting the <interface> subelements. This alows to
remove the crazy logic which was determining which element was already
formatted.
Additional simplification is achieved by switching to skipping the loop
using 'continue' rather than putting everything in a giant block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the two buffer approach to simplify the logic for terminating
the element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
