Move myself from 'Previous maintainers' section to 'the primary maintainers and
people with commit access rights' section, because I have a commit rights now.
Signed-off-by: Alex Jia <ajia@redhat.com>
Added a new field "vm-pid" to the VIRT_CONTROL audit record. This information
is useful to correlated another audit events to the events generated by
libvirt.
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
POLLIN and POLLHUP are not mutually exclusive. Currently the following
seems possible: the child writes 3K to its stdout or stderr pipe, and
immediately closes it. We get POLLIN|POLLHUP (I'm not sure that's possible
on Linux, but SUSv4 seems to allow it). We read 1K and throw away the
rest.
When poll() returns and we're about to check the /revents/ member in a
given array element, let's map all the revents bits to two (independent)
ideas: "let's attempt to read()", and "let's attempt to write()". This
should cover all errors, EOFs, and normal conditions; the read()/write()
call should report any pending error.
Under this approach, both POLLHUP and POLLERR are mapped to "needs read()"
if we're otherwise prepared for POLLIN. POLLERR also maps to "needs
write()" if we're otherwise prepared for POLLOUT. The rest of the mappings
(POLLPRI etc.) would be easy, but probably useless for pipes.
Additionally, SUSv4 doesn't appear to forbid POLLIN|POLLERR (or
POLLOUT|POLLERR) set simultaneously. One could argue that the read() or
write() call would return without blocking in these cases (with an error),
so POLLIN / POLLOUT would be justified beside POLLERR.
The code now penalizes POLLIN|POLLERR differently from plain POLLERR. The
former (ie. read() returning -1) is terminal and we jump to cleanup, while
plain POLLERR masks only the affected file descriptor for the future.
Let's unify those.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Earlier, when the number of vcpus was greater than the topology allowed,
libvirt didn't raise an error and continued, resulting in running qemu
with parameters making no sense. Even though qemu did not report any
error itself, the number of vcpus was set to maximum allowed by the
topology.
QEMU does not support security_model for anything but 'path' fs driver type.
Currently in libvirt, when security_model ( accessmode attribute) is not
specified it auto-generates it irrespective of the fs driver type, which
can result in a qemu error for drivers other than path. This patch ensures
that the qemu cmdline is correctly generated by taking into account the
fs driver type.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
To add support for running libvirt on PowerPC, a CPU driver for the
PowerPC platform must be added.
Most generic cpu driver routines such as CPU compare, decode, etc
are based on CPUID comparison and are not relevant for non-x86
platforms.
Here, we introduce stubs for relevant PowerPC routines invoked by libvirt.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@au.ibm.com>
When spawning an ssh connection, the environment variables
DISPLAY, SSH_ASKPASS, ... are passed. However XAUTHORITY,
which is necessary if the .Xauthority is in a non default
place, was not passed.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
virt-xml-validate fails when run on a domain XML file of type 'vbox'.
For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097
This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Add virnetdev.h,virnetdevbridge.h,virnetdevtap.h to private symbols,
since debian linker no longer allows transitive link resolution
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
with /etc/libvirt/libvirt.conf below:
uri_aliases = [
"hail=qemu:///system",
"sleet=qemu+ssh://root 9 115 122 57/system",
"sam=qemu+unix:///system?socket=/var/run/libvirt/libvirt-sock",
]
Neither "virsh -c hailly" nor "hai" should result in matching "hail=qemu:///system"
Fix URI alias prefix matching when connecting
Signed-off-by: Wen Ruo Lv <lvroyce@linux.vnet.ibm.com>
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:
<auth username='myuser'>
<secret type='ceph' usage='secretname'/>
</auth>
or
<auth username='myuser'>
<secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
This refactors the TAP creation code out of brAddTap into a new
function brCreateTap to allow it to be used on its own. I have also
changed ifSetInterfaceMac to brSetInterfaceMac and exported it since
it is will be needed by code outside of util/bridge.c in the next
patch.
AUTHORS | 1 +
src/libvirt_bridge.syms | 2 +
src/util/bridge.c | 116 +++++++++++++++++++++++++++++++----------------
src/util/bridge.h | 9 ++++
4 files changed, 89 insertions(+), 39 deletions(-)
Implement a generic helper to escape a given set of characters with a
leading '\'. Generalizes virBufferEscapeSexpr().
Signed-off-by: Sage Weil <sage@newdream.net>
when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020
virsh undefine command can now undefine an active guest, but the help information is still the old.
This patch modifies it and make it coincident to the manpage of virsh.
Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
Fix bug #611823 storage driver should prohibit pools with duplicate
underlying storage.
Add internal API virStoragePoolSourceFindDuplicate() to do uniqueness
check based on source location infomation for pool type.
* AUTHORS: add Lei Li
When libvirtd is running at non-root user, it won't create ${HOME}/.libvirt.
It will show error message:
17:44:16.838: 7035: error : virPidFileAcquirePath:322 : Failed to open pid file
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.
Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A virsh command like:
migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose
shows
Migration: [ 0 %]
during the storage copy and does not start counting
until the ram transfer starts
Fix this by scraping optional disk transfer status, and adding it
into the progress meter.
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
Detected in valgrind run:
==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184== by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184== by 0x41993A: cmdDominfo (virsh.c:2414)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184== definitely lost: 11 bytes in 3 blocks
* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
and remoteNodeGetSecurityModel.
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
This patch adds documentation about the 802.1Qbh related parameters
of the virtualport element for 'direct' interfaces.
Signed-off-by: David S. Wang <dwang2@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":
# virsh autostart example
error: Failed to mark domain example as autostarted
error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists
This patch ensures the autostart flag is set correctly even when the
domain is already defined.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=632100https://bugzilla.redhat.com/show_bug.cgi?id=675319
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
As reported by Diego Blanco in
https://bugzilla.redhat.com/show_bug.cgi?id=702602
commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.
There're several other issues reported with current OpenVZ driver:
#1: unclear error message when parsing "CPUS=" line
#2: openvz driver goes into crashing loop
#3: "NETIF=" line in configuration is not parsed correctly
#4: aborts even when optional parameter is missing
#5: there's a potential memory leak
This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.
Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.
* src/qemu/qemu_migration.c: add some additional job signal
flags for doing blkstat/blkinfo during a migration
* src/qemu/qemu_domain.c: add a condition variable that can be
used to efficiently wait for the migration code to clear the
signal flag
* src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
job signal flags during migration
When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".
Fix regression in virsh logging
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=664059
Reattaching pci device back to host without destroying guest or
detaching device from guest would cause host to crash. This patch adds
a check before doing device reattach. If the device is being assigned
to guest, libvirt refuses to reattach device to host. The patch only
works for Xen, for it just checks xenstore to get pci device
information.
Signed-off-by: Yufang Zhang <yuzhang@redhat.com>
gcc 4.6 warns when a variable is initialized but isn't used afterwards:
vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable]
This patch fixes these warnings. There are still 2 offending files:
- vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several
times outside of #ifdef. Fixing the warning would have required wrapping
all the assignment inside #ifdef which hurts readability.
vbox/vbox_tmpl.c: In function 'vboxAttachDrives':
vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable]
- esx_vi_types.generated.c: the name implies it's generated code and I
didn't want to dive into the code generator
esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free':
esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]
This patch enables the relative backing file path support provided by
qemu-img create.
If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
Wen Congyang gained commiter access
Created a new section of previous commiters to the project
but not involved much anymore: Karel Zak, Atsushi SAKAI,
Dave Leskovec and Dan Smith
The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When compiling libvirt with GCC 3.4.6 the following warning is being triggered quite a lot:
util/memory.h:60: warning: declaration of 'remove' shadows a global declaration
/usr/include/stdio.h:175: warning: shadowed declaration is here
Fix this by renaming the parameter to 'toremove'.
Depending if the qemu binary supports multiple pci-busses, the device
options will contain "bus=pci" or "bus=pci.0".
Only x86_64 and i686 seem to have support for multiple PCI-busses. When
a guest of these architectures is started, set the
QEMUD_CMD_FLAG_PCI_MULTIBUS flag.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
I added a host definition to a network definition:
<network>
<name>Lokal</name>
<uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
<bridge name='virbr1' stp='on' delay='0' />
<ip address='192.168.180.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.180.128' end='192.168.180.254' />
<host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
</dhcp>
</ip>
</network>
But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.
While not technically a double free (since VIR_FREE NULLs the
pointer), this is unnecessary extra code.
This crept in when the function was converted from virRun to virCommand.
The AUTHORS file has also been updated.
Current code does not pass VM mac address to a 802.1Qbh direct attach
interface using IFLA_VF_MAC. This patch adds support in macvtap code to
send IFLA_VF_MAC netlink request during port profile association on a
802.1Qbh interface.
Stefan Cc'ed for comments because this patch changes a condition for
802.1Qbg
802.1Qbh support for IFLA_VF_MAC in enic driver has been posted and is
pending acceptance at http://marc.info/?l=linux-netdev&m=129185244410557&w=2
Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
This patch adds network disk support to libvirt/QEMU. The currently
supported protocols are nbd, rbd, and sheepdog. The XML syntax is like
this:
<disk type="network" device="disk">
<driver name="qemu" type="raw" />
<source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
<host name="mon1.example.org" port="6000">
<host name="mon2.example.org" port="6000">
<host name="mon3.example.org" port="6000">
</source>
<target dev="vda" bus="virtio" />
</disk>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
When we set migrate_speed by json, we receive the following
error message:
libvirtError: internal error unable to execute QEMU command
'migrate_set_speed': Invalid parameter type, expected: number
The reason is that: the arguments of migrate_set_speed
by json is json number, not json string.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
fix warning
CC libvirt_util_la-virtaudit.lo
cc1: warnings being treated as errors
util/virtaudit.c: In function 'virAuditEncode':
util/virtaudit.c:146: error: implicit declaration of function 'virAsprintf' [-Wimplicit-function-declaration]
util/virtaudit.c:146: error: nested extern declaration of 'virAsprintf' [-Wnested-externs]
* tools/virsh.c: add missing option from the CLI to allows setting
up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
