On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail. Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.
* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.
We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acf, 2dee896); but commit 9612e4b
moved some LXC-only code into common files, resulting in this
build failure:
util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)
Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.
* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.
* configure.ac, spec file: firewalld defaults to enabled if dbus is
available, otherwise is disabled. If --with_firewalld is explicitly
requested and dbus is not available, configure will fail.
* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
When these are encountered, reload all the iptables reuls of all
libvirt's virtual networks (similar to what happens when libvirtd is
restarted).
* iptables, ebtables: use firewall-cmd's direct passthrough interface
when available, otherwise use iptables and ebtables commands. This
decision is made once the first time libvirt calls
iptables/ebtables, and that decision is maintained for the life of
libvirtd.
* Note that the nwfilter part of this patch was separated out into
another patch by Stefan in V2, so that needs to be revised and
re-reviewed as well.
================
All the configure.ac and specfile changes are unchanged from Thomas'
V3.
V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient. V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.
The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.
IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.
This one-time initialization works well. However, I've encountered
problems with testing:
1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)
2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).
3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.
4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.
This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.
Reading and writing of OpenSSH style "known_hosts" files is supported.
Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
Commit 350583c8 broke development on a RHEL 5 box, where the
ancient Autoconf 2.59 lacks AS_VERSION_STRING. Rather than
backport the complex awk script that newer autoconf uses for
true strverscmp comparisons from the shell, it was easier to
just open-code a shell case statement.
* configure.ac (qemu_version): Open-code a replacement for
AS_VERSION_CHECK.
The way LIBVIRT_VERSION_INFO is calculated has a timebomb that
will cause us to accidentally break soname when we change the
major version number to a non-zero value !
Given CURRENT:REVISION:AGE, libtool will generate
libvirt.so.($CURRENT-$AGE).$AGE.$REVISION
We set CURRENT to be MAJOR+MINOR and AGE to $MINOR, so as
soon as MAJOR changes to non-zero, we get libvirt.so.1
as the soname, eg 1.3.9 would create libvirt.so.1.3.9
Looks natural but is not ABI compatible with libvirt.so.0.x.y
The fix is to set CURRENT to always be exactly the same
as AGE. We want to have the major version reflected in
the so symlinks though. So then we set AGE to MAJOR*1000+MINOR
eg, so 1.3.9 would create libvirt.so.0.1003.9 and libvirt
2.51.3 would create libvirt.so.0.2051.3
libvirt creates invalid commands if wrong locale is selected. For
example with locale that uses comma as a decimal point, JSON commands
created with decimal numbers are invalid because comma separates the
entries in JSON. Fortunately even when decimal point is affected,
thousands grouping is not, because for grouping to be enabled with
*printf, there has to be an apostrophe flag specified (and supported).
This patch adds specific internal function for converting doubles to
strings with C locale.
The recent changes to the testsuite to validate exported symbols
flushed out a case of unconditionally exporting symbols that
were only conditionally compiled under HAVE_AVAHI.
* src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile
virnetservermdns unconditionally.
* configure.ac (HAVE_AVAHI): Drop unused automake conditional.
* src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not
present.
On Debian/Ubuntu, one of the libraries libvirt (indirectly) links
with exports a symbol named 'base64_encode'. This takes precedence
over GNULIB's base64_encode function during linking. Unfortunately
they of course have different API semantics. To avoid this problem
use a few #defines in config.h to rename the GNULIB provided
function to have a 'libvirt_gl_' prefix
There are a few issues with the current virAtomic APIs
- They require use of a virAtomicInt struct instead of a plain
int type
- Several of the methods do not implement memory barriers
- The methods do not implement compiler re-ordering barriers
- There is no Win32 native impl
The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.
* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
ops
* tests/viratomictest.c: Test validate to validate safety
of atomic ops.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 6e769eba made it a runtime error if libvirt was compiled
without yajl support but targets a new enough qemu. But enough
users are hitting this on self-compiled libvirt that it is worth
erroring out at compilation time, rather than an obscure failure
when trying to use the built executable.
* configure.ac: If qemu is requested and -version works, require
yajl when qemu version is new enough.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Add
comment.
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined. Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.
Based on analysis by Osier Yang.
* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.
Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.
* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:
CCLD networkxml2argvtest
*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!
Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.
Based on a suggestion by Daniel P. Berrange.
* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
The CoTaskMemFree function requires the ole32 DLL to be
linked against. Currently this is only done for the
VirtualBox driver. Also add it to libvirt_util.la
* configure.ac: Unconditionally add ole32 DLL to Win32
* src/Makefile.am: Link old32 to libvirt_util.la
* configure.ac (AM_PROG_CC_STDC): Stop using this macro.
It provokes warnings from newer automake and is superseded by
autoconf's AC_PROG_CC, which we're already using.
Always enable driver modules for libvirtd, if we have dlopen
available. This allows more modular packaging by distros
and ensures we don't break this config
* configure.ac: Default to enable driver modules
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist
* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
by test suite
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Most versions of libselinux do not contain the function
selinux_lxc_contexts_path() that the security driver
recently started using for LXC. We must add a conditional
check for it in configure and then disable the LXC security
driver for builds where libselinux lacks this function.
* configure.ac: Check for selinux_lxc_contexts_path
* src/security/security_selinux.c: Disable LXC security
if selinux_lxc_contexts_path() is missing
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
This results in output like:
2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since now we pre-set memory policy using libnuma to fully
drive numad, it needs to check numactl-devel if "with_numad"
is "yes".
configure with groups "--with-numad=yes --with-numactl=yes",
"--with-numad=no --with-numactl=yes", "--with-numad=yes
--with-numactl=yes" works fine after the change.
configure.ac: check for libnl-3 in addition to libnl-1
src/Makefile.am: link against libnl when needed
src/util/virnetlink.c:
support libnl3 api. To minimize impact on code flow, wrap the
differences under the virNetlink* namespace.
Unfortunately libnl3 moves netlink/msg.h to
/usr/include/libnl3/netlink/msg.h, so the LIBNL_CFLAGS need to be added
to a bunch of places where they weren't needed with libnl1.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 8fe455fd36 tried to work around
a regression introduced in upstream gnulib that requires gettext 0.18
or newer on all projects using bootstrap, by making libvirt require
gettext 0.18. But this fails on RHEL 6.2, which still ships gettext
0.17. Revert that change, and instead, import the latest round of
gnulib updates that fix that problem properly.
If you have already built in the window where libvirt required 0.18,
be aware that incremental updates may run into problems: this is
because 'autopoint --force' will not downgrade m4/po.m4 back to an
older version, but it must be downgraded back to 0.17 levels to work
with this patch. You may either manually remove that file then rerun
bootstrap, or it may prove easier to just clean up all non-git files
to start from a clean slate.
* bootstrap.conf: Revert minimum gettext back to 0.17.
* configure.ac: Likewise.
* .gnulib: Update to latest, for bootstrap fixes.
* bootstrap: Resync from gnulib.
Commit c9cd419cab added copying of the
makefile for translation files from gnulib. The makefile from gnulib is
of version 0.18 but the build configuration cretes macros from version
0.17 which breaks the build with message:
*** error: gettext infrastructure mismatch: using a Makefile.in.in from
gettext version 0.18 but the autoconf macros are from gettext version
0.17
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
indian languages and regenerated
Given that we auto-detect whether each -Wxxxx flag is supported by
GCC, and we are warning-free and use automake silent rules, there
is no compelling reason to allow compile warnings to be disabled.
Replace the --enable-compile-warnings flag with a simpler
--enable-werror flag, which defaults to 'yes' if building
from GIT, or 'no' if building from tar.gz
This helps ensure that everyone writing patches for libvirt will
take care to fix their warning problems before submitting for
review
* autobuild.sh: Force -Werror
* configure.ac: Update for LIBVIRT_COMPILE_WARNINGS macro change
* m4/virt-compile-warnings.m4: Permanently enable all warnings,
auto-enable Werror for GIT builds
Add a new flag '--with-test-suite' to configure to control whether
the test suite binaries are built by default. ie built with a
plain 'make', as opposed to delayed until 'make check'
For builds from tar.gz tests will not be built by default. For
builds from GIT, tests with be on by default, to try and ensure
that patch developers don't accidentally break the test suites
without noticing.
* configure.ac: Add --with-test-suite
* tests/Makefile.am: Use noinst_PROGRAMS instead of check_PROGRAMS
if building tests by default. Consolidate setting of TESTS and
{noinst,check}_PROGRAMS to avoid duplication
The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.
* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
by configure.ac
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
This patch adds a set of functions used in creating console streams for
domains using PTYs and ensures mutually exclusive access to the PTYs.
If mutually exclusive access is not used, two clients may open the same
console, which results in corruption on both clients as both of them
race to read data from the PTY.
Two approaches are used to ensure this:
1) Internal data structure holding open PTYs.
This is used internally and enables the user to forcibly
terminate another console connection eg. when somebody leaves
the console open on another host.
2) UUCP style lock files:
This uses UUCP lock files according to the FHS
( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES )
to check if other programs (like minicom) are not using the pty
device of the console.
This feature is disabled by default and may be enabled using
configure parameter
--with-console-lock-files=/path/to/lock/file/directory
or --with-console-lock-files=auto (which tries to infer the
location from OS used (currently only linux).
On usual linux systems, normal users may not write to the
/var/lock directory containing the locks. This poses problems
while in session mode. If the current user has no access to the
lockfile directory, check for presence of the file is still
done, but no lock file is created. This does NOT result in an
error.
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.
THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Since we already require the kernel to be new enough to support
LO_FLAGS_AUTOCLEAR, we might as well also require glibc to be
new enough to support epoll_create1().
* configure.ac (with_lxc): We require glibc 2.9 for LXC.
Reported and tested by Philipp Hahn.
Although the netcf interface driver can in theory be used by
the stateless drivers, in practice none of them want to use
it because they have different ways of dealing with interfaces.
Furthermore, if you have mingw32-netcf installed, then the
libvirt mingw32 build will fail with
../../src/interface/netcf_driver.c:644:5: error: unknown field 'close_used_without_including_unistd_h' specified in initializer
* configure.ac: disable netcf if built without libvirtd
Using automake.git (will become 1.12 someday), I got this error:
configure.ac:90: error: automatic de-ANSI-fication support has been removed
/usr/local/share/aclocal-1.11a/protos.m4:13: AM_C_PROTOTYPES is expanded from...
configure.ac:90: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
In short, pre-C89 compilers are no longer a viable portability
target. Besides, our code base already requires C99, so worrying
about pre-C89 seems pointless.
* configure.ac (AM_C_PROTOTYPES): Drop, since newer automake no
longer provides it.
Using dtrace (and systemtap in general) is Linux-specific.
Running ./autobuild.sh shows that attempting a cross-build to
target mingw was mistakenly trying to build dtrace code, merely
because it was present on the compilation host.
* configure.ac (with_dtrace): Don't attempt to use dtrace when
doing a cross-build hosted on Linux but targetting elsewhere.
Reported by Daniel P. Berrange.
This ought to fix the build if you have net/if.h but do
not have struct ifreq
* configure.ac: Check for struct ifreq in net/if.h
* src/util/virnetdev.c: Conditionalize to avoid use of
struct ifreq if it does not exist
The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.
Introduce a new internal API which is async signal safe.
virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
where available, otherwise falls back to the unsafe
gettimeofday
virTimeFieldsNowRaw replacements for gmtime(), convert a timestamp
virTimeFieldsThenRaw into a broken out set of fields. No localtime()
replacement is provided, because converting to
local time is not practical with only async signal
safe APIs.
virTimeStringNowRaw replacements for strftime() which print a timestamp
virTimeStringThenRaw into a string, using a pre-determined format, with
a fixed size buffer (VIR_TIME_STRING_BUFLEN)
For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe
* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".
This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.
The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.
Instead of
./configure --with-init-script=redhat
You can now do
./configure --with-init-script=systemd
Or better still:
./configure --with-init-script=systemd+redhat
We can also now support install of the upstart init script
* configure.ac: Add systemd, and systemd+redhat options to
--with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.
Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed
* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
While building on FreeBSD (and after fixing a ptsname_r link error),
I got this failure:
./.libs/libvirt_util.a(libvirt_util_la-threads.o)(.text+0x240): In function `virThreadCreate':
util/threads-pthread.c:185: undefined reference to `pthread_create'
It turns out that gnulib used only pthread_join for LIB_PTHREAD,
but on FreeBSD, libc provides that (as a stub function); whereas
the more complex pthread_create really does require -pthread,
which gnulib tracked under [LT]LIBMULTITHREAD.
* configure.ac (LIBS): Check LIBMULTITHREAD alongside LIB_PTHREAD.
* src/Makefile.am (THREAD_LIBS): New variable.
(libvirt_util_la_LIBADD, libvirt_lxc_LDADD): Use it.
Commit 1726a73 hacked around MacOS' lack of fdatasync, since
gnulib did not have it at the time. But now that we use newer
gnulib, we can avoid the hack.
* bootstrap.conf (gnulib_modules): Add fdatasync.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop our own check.
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.
For all this we require sanlock >= 1.8
* configure.ac: Check for sanlock_client.so instead of sanlock.so
and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
sanlock_align
Mingw lacks fsync, but gnulib provides that. Meanwhile, gnulib does
not (yet) provide fdatasync, so this is a quick hack to fake that
function on MacOS X; we can revert this configure change once gnulib
gives us a real module.
We have been implicitly relying on gnulib's largefile module being
pulled in by other modules, but it's better to make that explicit.
* bootstrap.conf (gnulib_modules): Add fsync. Make largefile use
explicit.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for fdatasync, and
fake it with fsync when not present.
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.
To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt
* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
tests/shunloadtest.c: A test case to unload libvirt while
a thread is still running.
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
release
* po/*.po*: pulled translations from the transifex teams and regenerated
localizations
Right now, every re-run of configure re-evaluates whether a
static analysis tool is in use. But if you run configure under
coverity, make a tweak, and then do an incremental rebuild with
gcc but not coverity to test the tweak, then rerun a build under
coverity, then configure does not get rerun, and static analysis
ends up with lots of false positives.
This patch caches the static analysis result, and also makes it
easier to force static analysis even if the existing checks are
insufficient to detect newer versions of the static analyzer tools.
* configure.ac (lv_cv_static_analysis): New cache variable.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed. Skip the test rather than failing
compilation in that case.
With newer gcc, the test consumed too much stack space. Move
things to static storage to fix that.
* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
Required for a coming patch where iohelper will operate on O_DIRECT
fds. There, the user-space memory must be aligned to file system
boundaries (at least 512, but using page-aligned works better, and
some file systems prefer 64k). Made tougher by the fact that
VIR_ALLOC won't work on void *, but posix_memalign won't work on
char * and isn't available everywhere.
This patch makes some simplifying assumptions - namely, output
to an O_DIRECT fd will only be attempted on an empty seekable
file (hence, no need to worry about preserving existing data
on a partial block, and ftruncate will work to undo the effects
of having to round up the size of the last block written), and
input from an O_DIRECT fd will only be attempted on a complete
seekable file with the only possible short read at EOF.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_memalign.
* src/util/iohelper.c (runIO): Use aligned memory, and handle
quirks of O_DIRECT on last write.
Currently, the xen statstest and reconnect tests are only compiled
if xend is running. Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.
This is in response to Eric's suggestion here
https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.
It can listen for UNIX and TCP stream sockets.
It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
Since the addition of the lock manager framework in 6a943419c5
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.
Change the dlopen check in configure to pick up dlopen when available.
Reported by Ruben Kerkhof.
Coverity 5.3.0 still outputs lots of COVERITY_* variables, but no
longer modifies COVERITY_BUILD_COMMAND in the environment. Pick
one that seems likely to stay around.
* configure.ac (STATIC_ANALYSIS): Detect newer Coverity.
In between fork and exec, a connection to sanlock is acquired
and the socket file descriptor is intionally leaked to the
child process. sanlock watches this FD for POLL_HANGUP to
detect when QEMU has exited. We don't want a rogus/compromised
QEMU from issuing sanlock RPC calls on the leaked FD though,
since that could be used to DOS other guests. By calling
sanlock_restrict() on the socket before exec() we can lock
it down.
* configure.ac: Check for sanlock_restrict API
* src/locking/domain_lock.c: Restrict lock acquired in
process startup phase
* src/locking/lock_driver.h: Add VIR_LOCK_MANAGER_ACQUIRE_RESTRICT
* src/locking/lock_driver_sanlock.c: Add call to sanlock_restrict
when requested by VIR_LOCK_MANAGER_ACQUIRE_RESTRICT flag
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.
* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
Remove some special case code that took care of mapping hyper to the
correct C types.
As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.
Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.
Suggested by Eric Blake.
Now that RHEL 5.6 ships with gettext 0.17, we can get out of the
stone age and use the newer gettext capabilities and improved
macros for certain configure tests.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
(MKINSTALLDIRS): Delete hack that is no longer needed.
* bootstrap.conf (buildreq): Check for minimum gettext version.
Based on a report by Wen Congyang.
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it. If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib. But this patch
did not turn up any compilation failures on Linux.
* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
There is no need to redefine _GNU_SOURCE in tests that occur after
gl_INIT, since that macro already AC_DEFINE'd it for us.
Signed-off-by: Eric Blake <eblake@redhat.com>
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:
> * The RPC implementation in libc is obsoleted. Old programs keep working
> but new programs cannot be linked with the routines in libc anymore.
> Programs in need of RPC functionality must be linked against TI-RPC.
> The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
> Visible changes of this change include (obviously) the inability to
> link
> programs using RPC functions without referencing the TI-RPC library,
> the
> removal of the RPC headers from the glibc headers, and the lack of
> symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
> Implemented by Ulrich Drepper.
(from glibc NEWS)
Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.
When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:
/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here
/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here
/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
Version 2.0.0 or yajl changed API. It is fairly trivial for us to
cope with both APIs in libvirt, so adapt.
* configure.ac: Probe for yajl2 API
* src/util/json.c: Conditional support for yajl2 API
* configure.ac libvirt.spec.in docs/news.html.in: update and document
the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
and vietnamese coming from transifex, regenerate
In Fedora 15, with clang 2.8, 'scan-build env' shows:
CCC_ANALYZER_ANALYSIS=-analyzer-check-objc-mem -analyzer-check-security-syntactic -analyzer-check-dead-stores -analyzer-check-objc-unused-ivars -analyzer-check-objc-methodsigs
But in rawhide, with clang 2.9, the same variable is set but
empty, implying the default set of analysis. We still want
sa_assert defined in that case, to stop clang from hitting
false positives.
* configure.ac (STATIC_ANALYSIS): Detect clang even when the set
of analyses is the default.
If one specify "--with-python=yes" but no python-devel package
is installed, we ignore it with just a notice message, which
doesn't give clear guide to user.
Remove custom code for checking compiler warnings, using
gl_WARN_ADD instead. Don't list all flags ourselves, use
gnulib's gl_MANYWARN_ALL_GCC to get all possible GCC flags,
then turn off the ones we don't want yet.
* acinclude.m4: Rewrite to use gl_WARN_ADD and gl_MANYWARN_ALL_GCC
* bootstrap.conf: Add warnings & manywarnings
* configure.ac: Switch to gl_WARN_ADD
* m4/compiler-flags.m4: Obsoleted by gl_WARN_ADD
* src/Makefile.am src/libvirt_private.syms configure.ac: share and
reuse the sexpr routines from sexpr.h of the old xen driver
* src/libxl/libxl_driver.c: implements libxlDomainXMLFromNative and
libxlDomainXMLToNative
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
The libxenlight driver does not build against the tech preview
version of libxenlight in Xen 4.0. Only enable building the
driver against more complete libxenlight found in Xen 4.1.
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
The kill() function doesn't exist on Win32, so it needs to be
checked for at build time & code disabled in cgroups
* configure.ac: Check for kill()
* src/util/cgroup.c: Stub out virCGroupKill* functions
when kill() isn't available
Currently, we need virIsDevMapperDevice() when we build libvirt with
disk or mpath storage drivers. So we should check device-mapper-devel
when we build with disk storage driver but without mpath storage
driver.
Two regressions:
Commit df1011ca broke builds for systems that lack devmapper
(non-Linux, as well as Linux with ./autogen.sh --without-libvirtd
and without the libraries present).
Commit ce6fd650 broke cross-compilation, due to a gnulib bug.
* .gnulib: Update to latest, for cross-compilation fix.
* src/util/util.c (virIsDevMapperDevice): Provide stub for
platforms not using storage driver.
* configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H.
devmapper issue reported by Wen Congyang.
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Error: Expecting a partition number.
This patch introduces 'dmsetup' to fix it.
Changes:
- New function "virIsDevMapperDevice" in "src/utils/utils.c"
- remove "is_dm_device" in "src/storage/parthelper.c", use
"virIsDevMapperDevice" instead.
- Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
- Check "dmsetup" in 'configure.ac' for "with-storage-disk"
- Changes on "src/Makefile.am" to link against libdevmapper
- New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"
Changes from v1 to v3:
- s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
- replace "virRun" with "virCommand"
- sort the list of util functions in "libvirt_private.syms"
- ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.
e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted
Name Path
-----------------------------------------
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
Make with_packager and with_packager_version default to "no". This way
--without-packager-version (as shorthand for --with-packager(-version)=no)
works correctly too.
Prior to this patch libvirt outputs a line like this when
--with-packager(-version) was not specified
# ./daemon/libvirtd
14:11:15.018: 31796: info : libvirt version: 0.8.8, package: ()
Now the unspecified parts are correctly omitted.
Reported by Osier Yang.
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.
eg
$ LIBVIRT_DEBUG=1 virsh
18:13:28.013: 17536: info : libvirt version: 0.8.7
18:13:28.013: 17536: debug : virInitialize:361 : register drivers
...
The 'configure' script gains two new arguments which can be
used as
--with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
--with-packager-version="1.fc14"
to allow distros to append a custom string with package specific
data.
The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.
eg
$ LIBVIRT_DEBUG=1 virsh
18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
18:14:52.086: 17551: debug : virInitialize:361 : register drivers
Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds
* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
virSetUIDGID() sets both the real and effective group and user of the
process, and additionally calls initgroups() to assure that the
process joins all the auxiliary groups that the given uid is a member
of.
Running an instance of the router advertisement daemon (radvd) allows
guests using the virtual network to automatically acquire an IPv6
address and default route. Note that acquiring an address only works
for networks with a prefix length of exactly 64 - radvd is still run
in other circumstances, and still advertises routes, but autoconf will
not work because it requires exactly 64 bits of address info from the
network prefix.
This patch avoids a race condition with the pidfile by manually
daemonizing radvd rather than allowing it to daemonize itself, then
creating our own pidfile (in addition to radvd's own file, which is
unnecessary, but there is no way to tell radvd to not create it). This
is accomplished by exec'ing it with "--debug 1" in the commandline,
and using virCommand's features to fork, create a pidfile, and detach
from the newly forked process.
All of the iptables functions eventually call down to a single
bottom-level function, and fortunately, ip6tables syntax (for all the
args that we use) is identical to iptables format (except the
addresses), so all we need to do is:
1) Get an address family down to the lowest level function in each
case, either implied through an address, or explicitly when no
address is in the parameter list, and
2) At the lowest level, just decide whether to call "iptables" or
"ip6tables" based on the family.
The location of the ip6tables binary is determined at build time by
autoconf. If a particular target system happens to not have ip6tables
installed, any attempts to run it will generate an error, but that
won't happen unless someone tries to define an IPv6 address for a
network. This is identical behavior to IPv4 addresses and iptables.
brSetInetAddress can only set a single IP address on the bridge, and
uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace
it and brSetInetNetmask with a single function that uses the external
"ip addr add" command to add an address/prefix to the interface - this
supports IPv6, and allows adding multiple addresses to the interface.
Although it isn't currently used in the code, we also add a
brDelInetAddress for completeness' sake.
Also, while we're modifying bridge.c, we change brSetForwardDelay and
brSetEnableSTP to use the new virCommand API rather than the
deprecated virRun, and also log an error message in bridge_driver.c if
either of those fail (previously the failure would be completely
silent).
Now the VMware driver doesn't depend on the ESX driver anymore.
Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE.
Also add a libvirt_vmx.syms file.
Move some escaping functions from esx_util.c to vmx.c.
Adapt the test suite, ESX and VMware driver to the new code layout.
* configure.ac (dlopen): Cygwin dlopen is in libc; avoid spurious
failure.
(XDR_CFLAGS): Define when needed.
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS): Use it.
* configure.ac (with_selinux): Check for <selinux/label.h>.
* src/security/security_selinux.c (getContext): New function.
(SELinuxRestoreSecurityFileLabel): Use it to restore compilation
when using older libselinux.
Autoconf 2.59 doesn't define ${localedir}, so libvirt was failing
to compile due to a missing LOCALEDIR until today's configmake fix.
* .gnulib: Update to latest for configmake fix.
* configure.ac (libpcap): Avoid AS_CASE.
Don't require dlopen, but link to ole32 and oleaut32 on Windows.
Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.
Get the VirtualBox version from the registry.
Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.
Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes
to be implicitly passed down, which cause yes/bin/pcap-config to be
searched for rather than /usr/bin/pcap-config.
Also output pcap: no when pcap is not found or disabled.
This fixes a misleading error message saying the libnl package
needs to be installed, when it's really the libnl-devel package
needing to be installed.
To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.
* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
This partly reverts df90ca7661.
Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.
Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185
Detection order for VBoxXPCOMC.so:
1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path
Also cleanup the glue code and improve error reporting.
A missing shell was noisy, and the use of command to decipher a
shell's absolute path requires "" rather than ''.
* configure.ac (lv_cv_wrapper_shell): Fix logic errors if candidate
shell is not available.
* .gitignore: Ignore file created when /bin/sh is old dash.
Reported by Matthias Bolte.
Older dash mistakenly truncates regular files when using <> redirection;
this kills our use of double dd to reduce storage overhead when
saving qemu images. But qemu insists on running a command through
/bin/sh, so we work around it by having qemu run $sh -c 'real command'
when we have a replacement $sh in mind.
* configure.ac (VIR_WRAPPER_SHELL): Define to a replacement shell,
if /bin/sh is broken on <> redirection.
* src/qemu/qemu_monitor.h (VIR_WRAPPER_SHELL_PREFIX)
(VIR_WRAPPER_SHELL_SUFFIX): New macros.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
The default location for the XML catalog file, /etc/xml/catalog,
used when validating the generated html docs, isn't correct for
MacOS X.
This commit adds an option to the configure script, allowing the
default to be overridden:
--with-xml-catalog-file=/path/to/xml/catalog/file
It is useful to know where the client is connecting from,
so include the socket address in probe data.
* daemon/libvirtd.h: Use virSocketAddr for storing client
address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
* .gnulib: Update to latest, for termios fix.
* configure.ac (AC_CHECK_HEADERS): Drop redundent check.
* bootstrap: Synchronize from upstream.
Reported by Daniel P. Berrange.
Disabling these two drivers on MacOS X, where they are known to
not work, allows libvirt (including the daemon) to compile without
any further changes.
This fixes a small logic bug, where passing --without-macvtap
on the configure line, or otherwise indicating a lack of
support for macvtap, causes configure to bail.
The configure script was breaking on MacOS X unless passed:
--without-storage-mpath
This patch leverages Stefan Bergers earlier work for nwfilter,
so non-linux systems don't even attempt to build multipath.
In this patch I am reworking the logic around detecting virtual port support and requiring the libnl dependency.
- It requires --with-macvtap and displays an error in case of --without-macvtap --with-virtualport.
- It tests for availability of certain data in include files and displays an error in case the include file is not at the correct level and --with-virtualport was chosen
- displays 'checking' messages for macvtap and virtualport support and results
- libnl support is required when macvtap is found or requested; if libnl is not there, please supply without-macvtap
Mac OS X provides an "/Applications" folder, not an "/Application" folder,
so installed VirtualBox wasn't being detected by default.
This 1 character patch fixes this.
I got tired of seeing this.
config.status: executing libtool commands
/bin/rm: cannot remove `libtoolT': No such file or directory
config.status: executing po-directories commands
While I was at it, there were a couple other unused variables.
* configure.ac (RM, MV, TAR): Drop; nothing in libvirt directly uses
this, and assigning RM interferes with libtool.
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
This would have detected the bug in commit 38ad33931 (Aug 09), which
we missed until commit f828ca35 (Jul 10); over 11 months later.
However, on Fedora 13, it also triggers LOTS of warnings from
the libcurl-devel header for two files:
esx/esx_vi.c: In function 'esxVI_CURL_Perform':
esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
...
xenapi/xenapi_driver.c: In function 'call_func':
xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op]
...
libcurl allows to disable the type-checking code that triggers those
warnings, along with the reduction in type-safety of calls to some
libcurl functions. I figure this is worth the improved compiler
checking throughout the rest of libvirt.
* acinclude.m4 (--enable-compile-warnings=error): Add -Wlogical-op.
* configure.ac: Add -DCURL_DISABLE_TYPECHECK to LIBCURL_CFLAGS to
avoid compilation warning.
Suggested by Daniel P. Berrange.
Tweaked by Matthias Bolte.
After the recent libvirt-qemu library addition, VPATH builds fail with:
CC libvirt_qemu_la-libvirt-qemu.lo
In file included from ../../src/libvirt-qemu.c:29:
../../include/libvirt/libvirt-qemu.h:17:22: error: libvirt.h: No such file or directory
...
CCLD libvirt-qmeu.la
/usr/bin/ld: cannot open linker script file libvirt_qemu.syms: No such file or directory
This fixes both issues (there are still some documentation VPATH issues,
but those don't show up with 'make check').
* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): While libvirt.syms is
generated and lives in $(builddir), libvirt_qemu.syms is static
and lives in $(srcdir).
* include/libvirt/libvirt-qemu.h (includes): Pull in libvirt.h via
the public location, since this is a public header.
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This allows the user to give an explicit path to configure
./configure --with-vbox=/path/to/virtualbox
instead of having the VirtualBox driver probe a set of possible
paths at runtime. If no explicit path is specified then configure
probes the set of "known" paths.
https://bugzilla.redhat.com/show_bug.cgi?id=609185
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
This patch introduces a dependency on libnl, which subsequent patches
will then use.
Changes from V1 to V2:
- added diffstats
- following changes in tree
* configure.ac: Check for <linux/magic.h>.
* src/util/storage_file.c: Include <linux/magic.h> only if present.
Linux kernels prior to 2.6.19 lacked it.
[__linux__] (NFS_SUPER_MAGIC): Define if not already defined.
* configure.ac (AC_CHECK_FUNCS_ONCE, AC_SYS_LARGEFILE): Rely on
gnulib for strtok_r and large file support.
(AC_OBJEXT): Drop call now done by AC_PROG_CC.
(m4_foreach_w): Drop macro guaranteed by gnulib.
(AC_C_CONST): Drop call declared obsolete by autoconf.
Signed-off-by: Eric Blake <eblake@redhat.com>
Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions. Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.
* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks. Optimize function
checks. Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.
When cross-compiling on Linux, configure will misdetect the target as
Linux because it uses uname instead of relying on the $host variable.
This results in including libvirt_linux.syms into libvirt.syms and
therefore trying to export undefined symbols.
Replace uname checks with $host checks to fix this.
In commit 98fb83ce25 I changed the
version script handling. But it seems that I didn't test this properly
and broke it. The .def file is passed to the compiler directly, but it
should get passed to the linker instead.
Set VERSION_SCRIPT_FLAGS to -Wl, to pass the .def file correctly to
the linker.
This fixes the undefined symbol errors while linking virsh.
Let configure detect ld instead of hardcoding /usr/bin/ld, because
MinGW may have ld in /bin.
Only use a .def file to export symbols on MinGW. Cygwin's ld supports
the normal .syms file used on Linux.
Cygwin's XDR implementation defines xdr_u_int64_t instead of
xdr_uint64_t and lacks IXDR_PUT_INT32/IXDR_GET_INT32.
Alter the IXDR_GET_LONG regex in rpcgen_fix.pl so it doesn't destroy
the #define IXDR_GET_INT32 IXDR_GET_LONG in remote_protocol.x.
Also fix the remote_protocol.h regex in rpcgen_fix.pl.
Also move the equivalent checks for LXC and UML before their header
checks. This way configure doesn't check for the headers when the driver
gets disabled anyway.
Under cygwin, winsock2.h is intentionally incompatible with,
<sys/socket.h>, and checking for existence is wrong.
Under mingw, HAVE_WINSOCK2_H is defined on our behalf by
gnulib, in a way that does not interfere with cygwin.
* configure.ac: Drop unnecessary header check.
Reported by Matthias Bolte.
* Fix a logic error in configure.ac that prevented --with-selinux=no
from being used with --with-secdriver-selinux=no.
* Fix some strings to clarify the difference between --with-selinux
and --with-secdriver-selinux.
Signed-off-by: Spencer Shimko <sshimko@tresys.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* configure.ac (STATIC_ANALYSIS): Define when run via clang's
scan-build or coverity-prevent's cov-build.
Use the CLANG_CC and COVERITY_BUILD_COMMAND envvars as witnesses.
I am getting rid of determining the path to necessary CLI tools at
compile time. Instead, now the firewall driver has an initialization
function that uses virFindFileInPath() to determine the path to
necessary CLI tools and a shutdown function to free allocated memory.
The rest of the patch mostly deals with availability of the CLI tools
and to not call certain code blocks if a tool is not available and that
strings now have to be built slightly differently.
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
the messages
The network filter / snapshot / hooks code introduced some
non-portable pices that broke the win32 build
* configure.ac: Check for net/ethernet.h required by nwfile config
parsing code
* src/conf/nwfilter_conf.c: Define ethernet protocol constants
if net/ethernet.h is missing
* src/util/hooks.c: Disable hooks build on Win32 since it lacks
fork/exec/pipe
* src/util/threads-win32.c: Fix unchecked return value
* tools/virsh.c: Disable SIGPIPE on Win32 since it doesn't exist.
Fix non-portable strftime() formats
Just checking for a windres tool might hit even on Linux systems when
building for Linux (e.g.: when using Gentoo and having built binutils
with multitarget support), and will then fail to link properly at the
end of the build.
* configure.ac: Avoid searching for windres on non windows target
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.
So, when for example an interface description in the domain XML has
looked like this up to now:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'>
<parameter name='IP' value='10.2.3.4'/>
</filterref>
</interface>
you may omit the IP parameter:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'/>
</interface>
Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.
A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.
* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
src/nwfilter/nwfilter_ebiptables_driver.[ch]
src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
* cfg.mk (sc_prohibit_test_minus_ao): Also check for [.
* docs/Makefile.am (%.html, html/index.html): Avoid non-portable
test usage.
* libvirt.spec.in (%post): Likewise.
* tools/virt-pki-validate.in (servercert.pem): Likewise.
* configure.ac (LOGNAME): Use test, not [, in files processed by
autoconf.
Detected by Matthias Bolte.
This patch adds IPv6 filtering support for the following protocols:
- tcp-ipv6
- udp-ipv6
- udplite-ipv6
- esp-ipv6
- ah-ipv6
- sctp-ipv6
- all-ipv6
- icmpv6
Many of the IPv4 data structure could be re-used for IPv6 support.
Since ip6tables also supports pretty much the same command line parameters
as iptables does, also much of the code could be re-used and now
command lines are invoked with the ip(6)tables tool parameter passed
through the functions as a parameter.
This patch adds support for L3/L4 filtering using iptables. This adds
support for 'tcp', 'udp', 'icmp', 'igmp', 'sctp' etc. filtering.
As mentioned in the introduction, a .c file provided by this patch
is #include'd into a .c file. This will need work, but should be alright
for review.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
* configure.ac libvirt.spec.in: update with new version
* docs/news.html.in: add list of changes in 0.7.7
* po/*po*: updated spanish and russian localisations, rebuilt
With the recent changes to the linking defaults in Fedora 13 (namely
enabling --no-add-needed behaviour by default), we have to pass the
dlopen()-providing libraries directly at the link of the module; use the
same AC_SEARCH_LIBS function as used before to look for it and add it to
the Makefile.
since we're using gettext-0.14.1, which uses that now-obsolete
automake symbol. Otherwise, make distcheck would fails like this:
make[2]: Entering directory `/t/libvirt-0.7.6/_build/po'
/bin/sh @MKINSTALLDIRS@ /t/libvirt-0.7.6/_inst/share
/bin/sh: @MKINSTALLDIRS@: No such file or directory
make[2]: *** [install-data-yes] Error 127
* configure.ac (MKINSTALLDIRS): Define.
For reference, we're currently hamstrung by our desire
to support RHEL5, which still uses gettext-0.14:
http://bugzilla.redhat.com/523713
Create the filesystem on the partition used by the pool
* configure.ac: check for mkfs availability
* libvirt.spec.in: add extra require on util-linux for mkfs
* src/storage/storage_backend_fs.c: run mkfs with the expected
fs type when creating a filesystem pool
This patch adds build support for libvirt checking for certain contents
of /usr/include/linux/if_link.h to see whether macvtap support is
compilable on that system. One can disable macvtap support in libvirt
via --without-macvtap passed to configure.
* configure.ac src/Makefile.am: new build support
* src/libvirt_macvtap.syms: list of exported symbols
* src/util/macvtap.c: empty module to not break compilation
