Commit Graph

434 Commits

Author SHA1 Message Date
Daniel Veillard
a4a7c7e9c4 Release of libvirt-1.1.4
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localizations from transifex and regenerate
2013-11-04 12:30:41 +08:00
Daniel P. Berrange
23142ac91a Push RPM deps down into libvirt-daemon-driver-XXXX sub-RPMs
For inexplicable reasons, many of the 3rd party package deps
were left against the 'libvirt-daemon' RPM when the drivers
were split out. This makes a minimal install heavier that
it should be. Push them all down into libvirt-daemon-driver-XXX
so they're only pulled in when truly needed

With this change applied, a minimal install of just the
libvirt-daemon-driver-lxc RPM is reduced by 41 MB on a
Fedora 19 host.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-29 14:31:18 +00:00
Daniel P. Berrange
8adc92694f Move virt-login-shell into libvirt-login-shell sub-RPM
Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-21 14:03:52 +01:00
Daniel Veillard
a72940f954 Release of libvirt-1.1.3
- configure.ac docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: updated localization and regenerated
2013-10-01 15:04:14 +08:00
Cole Robinson
e23216da9a spec: Clean up distribution of ChangeLog (and others)
- Move COPYING* to libvirt-client, so every package pulls them in
- Move AUTHORS ChangeLog.gz NEWS README TODO from -daemon to -docs
- Drop duplicate distribution of docs in -python

https://bugzilla.redhat.com/show_bug.cgi?id=977099
2013-09-25 13:45:36 -04:00
Daniel P. Berrange
922b7fda77 Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.

To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.

This fix requires that libvirt is re-built against a version of
polkit that has the fix for its CVE-2013-4288, so that libvirt
can see 'pkg-config --variable pkcheck_supports_uid polkit-gobject-1'

Signed-off-by: Colin Walters <walters@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-18 15:13:42 +01:00
Eric Blake
12509c7999 spec: make client-only testing easier
Several recent patches cleaned up 'make rpm' for the situation
when client_only is true; these were done by manual spec file
editing (since it's relatively hard to come by a RHEL 5 s390
box).  Make it easier to do in the future via a simpler command
line override.

* libvirt.spec.in (client_only): Allow for override.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-05 07:06:36 -06:00
Eric Blake
c021f5cecc spec: default vbox according to libvirtd build
Commit ba5f3c7 moved virtualBox support into libvirtd, but the spec
file was still unconditionally requesting it even when not building
the server side.  Thankfully there were no ill effects for a
client_only build, as most uses of %{with_vbox} were guarded by
%{with_libvirtd}; but we might as well avoid confusion by more
closely matching the makefile.

* libvirt.spec.in (with_vbox): Hoist to server conditionals.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-04 14:55:43 -06:00
Eric Blake
d42906fd00 spec: fix rpm build when lxc disabled
'make rpm' failed if ~/.rpmmacros contains '%_without_lxc 1',
which simulates the case of not having lxc available.

RPM build errors:
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/etc/libvirt/virt-login-shell.conf
    File not found by glob: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/share/man/man1/virt-login-shell.1*
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/bin/virt-login-shell
make: *** [rpm] Error 1

Reported by Dan Berrange.

* libvirt.spec.in: Mark virt-login-shell as conditional on lxc.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-04 11:30:18 -06:00
Daniel Veillard
85240daba2 Release of libvirt-1.1.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: merged new localizations and regenerated
2013-09-02 09:47:37 +08:00
Eric Blake
70363ea9ff build: add configure option to disable gnulib tests
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc).  While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior).  Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on.  It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).

Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable.  Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.

* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 10:02:38 -06:00
Eric Blake
6094b1ff19 build: avoid -lgcrypt with newer gnutls
https://bugzilla.redhat.com/show_bug.cgi?id=951637

Newer gnutls uses nettle, rather than gcrypt, which is a lot nicer
regarding initialization.  Yet we were unconditionally initializing
gcrypt even when gnutls wouldn't be using it, and having two crypto
libraries linked into libvirt.so is pointless, but mostly harmless
(it doesn't crash, but does interfere with certification efforts).

There are three distinct version ranges to worry about when
determining which crypto lib gnutls uses, per these gnutls mails:
2.12: http://lists.gnu.org/archive/html/gnutls-devel/2011-03/msg00034.html
3.0: http://lists.gnu.org/archive/html/gnutls-devel/2011-07/msg00035.html

If pkg-config can prove version numbers and/or list the crypto
library used for static linking, we have our proof; if not, it
is safer (even if pointless) to continue to use gcrypt ourselves.

* configure.ac (WITH_GNUTLS): Probe whether to add -lgcrypt, and
define a witness WITH_GNUTLS_GCRYPT.
* src/libvirt.c (virTLSMutexInit, virTLSMutexDestroy)
(virTLSMutexLock, virTLSMutexUnlock, virTLSThreadImpl)
(virGlobalInit): Honor the witness.
* libvirt.spec.in (BuildRequires): Make gcrypt usage conditional,
no longer needed in Fedora 19.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 09:58:48 -06:00
Daniel P. Berrange
38550ae809 Add an example config file for virtlockd
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 15:03:04 +01:00
Daniel P. Berrange
6ff0cffd55 Add a man page for virtlockd daemon
Create a virtlockd.pod.in file containing the man page
content for virtlockd.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 11:56:34 +01:00
Dan Walsh
54d69f540c Introduce a virt-login-shell binary
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-08 16:36:31 +01:00
Jiri Denemark
010065d702 spec: Explicitly claim ownership of channel subdir
As both /var/lib/libvirt/qemu and /var/lib/libvirt/qemu/channel/target
are owned by us, the intermediate /var/lib/libvirt/qemu/channel should
be owned by us too.
2013-08-02 17:22:33 +02:00
Daniel P. Berrange
311eae8257 Remove reference to python/tests from RPM %doc
The python/tests files were recently deleted, but a reference was
left in the RPM %doc entry

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-02 16:29:43 +02:00
Jiri Denemark
462863a3ee spec: Don't mix commands with macro definitions
%build section should first define all required macros and then run
commands. Interleaving them makes it harder to spot what commands are
run.
2013-07-30 17:13:40 +02:00
Jiri Denemark
d5cd5bf031 spec: Use --enable-werror on RHEL
As RHEL provides a stable tool chain, we don't have to worry about
frequent changes in reported compiler warnings (which prevents us from
enabling -Werror unconditionally).
2013-07-30 17:05:44 +02:00
Jiri Denemark
a718d28279 spec: RHEL-7 does not have sanlock on i686 2013-07-30 17:05:44 +02:00
Peter Krempa
9c7de20a2b spec: Disable libssh2 support for RHEL
https://bugzilla.redhat.com/show_bug.cgi?id=905513

Libssh2 isn't reliable enough to support the libvirt transport using it.
The problems include mishandling of "known_hosts" files that may confuse
users.
2013-07-30 17:05:43 +02:00
Daniel P. Berrange
6aa5ebbecd Support apparmor in RPM spec
If libapparmor-devel happens to be installed when building the
RPM, it will failed due to unlisted virt-aa-helper in %files.
Add support for apparmor in the spec, so that we can explicitly
turn it on/off, defaulting to off in all distros. This causes
--without-apparmor to be given to configure, preventing the
build failures if the user happens to have libapparmor-devel
present.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-30 14:13:58 +01:00
Jiri Denemark
095ba43903 spec: Cat test-suite.log if make check fails
Current automake enables parallel test by default, which means test
details are only logged in test-suite.log and not printed to stderr.
This patch makes test failures directly visible in RPM build logs even
when parallel tests are turned on.
2013-07-29 18:14:02 +02:00
Cole Robinson
3347a42032 python: Drop TODO
File hasn't been really touched for 7 years. And with recent rawhide
changes it contributed to an RPM build failure. Let's drop it.

This also removes installation of a libvirt-python doc dir, so drop
handling of it from the RPM spec.
2013-07-29 07:54:18 -04:00
Daniel Veillard
034d322978 Release of libvirt-1.1.0
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: updated localizations and regenerated
2013-07-01 17:22:49 +08:00
Eric Blake
3a214482ec spec: require xen-devel for libxl driver
When using 'rpmbuild --define "_without_xen 1"', but on a new enough
Fedora where %{with_libxl} still gets set to 1 by default, the
build dependencies were incomplete, which could result in 'make rpm'
failing because ./configure failed to build the libxl driver.

* libvirt.spec.in (BuildRequires): Fix xen-devel condition.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-06-29 14:56:05 -06:00
Daniel Veillard
0c737dfb44 Add polkit policy for API checks to rpm spec 2013-06-25 13:44:47 +02:00
Ján Tomko
31d42506fb conf: add features to volume target XML
Add <features> and <compat> elements to volume target XML.

<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.

<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
2013-06-21 13:25:30 +02:00
Cole Robinson
ce672cde62 spec: Enable KVM support on ARM
F20/rawhide has support for this.

From: Peter Robinson <pbrobinson@gmail.com>
2013-06-18 07:33:23 -04:00
Cole Robinson
db459dbdb9 spec: Drop Requires: vbox
Since this package isn't provided by any stock RH based distro. The
upstream RPMs are called VirtualBox anyways.
2013-06-08 18:32:59 -04:00
Jiri Denemark
3b50a711f0 spec: Explicitly require libgcrypt-devel
Our configure.ac says:

    Not all versions of gnutls include -lgcrypt, and so we add
    it explicitly for the calls to gcry_control/check_version

Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.
2013-06-03 15:15:44 +02:00
Daniel Veillard
4497ef50dc Release of libvirt 1.0.6
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: pull localization updates and regenerate the po
2013-06-03 12:09:56 +02:00
Viktor Mihajlovski
831909a94e spec: Build vbox packages only for x86 architectures
Commit 6ab6bc19f0 has introduced separate
daemon/driver packages for vbox. These should only be built for x86
architectures which is done hereby.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-24 10:11:00 -06:00
Eric Blake
de483052a2 maint: follow recommended practice for using LGPL
https://www.gnu.org/licenses/gpl-howto.html states:

You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.

If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.

* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:15:21 -06:00
Daniel P. Berrange
6ab6bc19f0 Add libvirt-daemon-vbox & libvirt-daemon-driver-vbox RPMs
Now the VirtualBox driver is a loadable module, it needs
to live in its own sub-RPM

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-17 17:09:29 +01:00
Eric Blake
9615ca59c6 spec: fix outdated comment
https://bugzilla.redhat.com/show_bug.cgi?id=963016 points out that
we don't use initscripts by default on Fedora any more.

* libvirt.spec.in (Requires): Better explanation of gettext.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-14 21:07:40 -06:00
Eric Blake
a2584d58f6 spec: proper soft static allocation of qemu uid
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed.  In response that problem, Fedora
packaging guidelines were recently updated.  This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups

* libvirt.spec.in (daemon): Follow updated Fedora guidelines.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-06 14:05:05 -06:00
Laine Stump
9eafa25116 build: fix make rpm failure
Commit 297c99a accidentally put a { where a ( belonged, causing make
rpm to fail.
2013-05-03 07:52:22 -04:00
Michal Privoznik
297c99a567 qemu: Generate agent socket path if missing
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:

$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name

for qemu system mode, and

$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name

for qemu session mode.
2013-05-02 16:40:24 +02:00
Daniel Veillard
8e20a23fb6 Release of libvirt-1.0.5
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: pulled and merged a number of new localization updates
2013-05-02 15:04:50 +08:00
Eric Blake
e2472e6957 spec: collect all BuildRequires into one area
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections.  This
appears to be the only offender.

* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-01 20:55:59 -06:00
Jiri Denemark
6f1b9c8d2a spec: Require pod2man when running autoreconf
Since commit b8a32e0e94, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.
2013-04-08 16:11:16 +02:00
Michal Privoznik
5e5ca84e31 test: Return Libvirt logo as domain screenshot
This is just a bare Easter Egg. Whenever a user runs virDomainScreenshot
over a domain in test driver, he'll get the Libvirt PNG logo in return.
2013-04-02 14:38:56 +02:00
Daniel Veillard
89d730201f Release of libvirt-1.0.4
- configure.ac docs/news.html.in libvirt.spec.in: updates for the release
- po/*.po*: fetch translation updates from Transifex and regenerate
2013-04-01 10:57:04 +08:00
Daniel Veillard
be1c364d89 Release of libvirt 1.0.3
- configure.ac docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: merged in transifex updates for fr,hi,pl,ja,uk,it and
  regenerated
2013-03-05 12:00:53 +08:00
Jiri Denemark
53657a0abe spec: Fix minor changelog issues
When a changelog entry references an RPM macro, % needs to be escaped so
that it does not appear expanded in package changelog.

Fri Mar  4 2009 is incorrect since Mar 4 was Wednesday. Since
libvirt-0.6.1 was released on Mar 4 2009, we should change Fri to Wed.
2013-02-05 10:00:32 +01:00
Jiri Denemark
d45066a55f spec: Avoid using makeinstall relic
The macro was made to help installing broken packages that did not use
DESTDIR correctly by overriding individual path variables (prefix,
sysconfdir, ...). Newer rpm provides fixed make_install macro that calls
make install with just the correct DESTDIR, however it is not available
everywhere (e.g., RHEL 5 does not have it). On the other hand the
make_install macro is simple and straightforward enough for us to use
its expansion directly.
2013-01-31 16:53:19 +01:00
Daniel Veillard
4a824cdbc4 Release of libvirt-1.0.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations
2013-01-30 10:42:05 +01:00
Eric Blake
c8f79c9b29 spec: indent %if to make it easier to see conditions
Nested conditionals are hard to read if they are not indented.
We can't add arbitrary whitespace to everything in spec files,
but we CAN add spaces before %if and %define.  Use this trick,
plus a fancy sed script that rewrites a spec file into a C
file, so we can use cppi to keep our spec file nice.

For reference, the sed script converts code like:

|# RHEL-5 builds are client-only for s390, ppc
|%if 0%{?rhel} == 5
|    %ifnarch %{ix86} x86_64 ia64
|        %define client_only        1
|    %endif
|%endif

into the following for cppi:

|// # RHEL-5 builds are client-only for s390, ppc
|#if a // 0%{?rhel} == 5
|# if a // %{ix86} x86_64 ia64
|#  define client_only        1
|# endif
|#endif

and errors from 'make syntax-check' look like:
spec_indentation
cppi: mingw-libvirt.spec.in: line 130: not properly indented
maint.mk: incorrect preprocessor indentation

* libvirt.spec.in: Add some indentation to make it easier to follow
various conditionals.
* mingw-libvirt-spec.in: Likewise.
* cfg.mk (sc_spec_indentation): New syntax check to enforce it.
2013-01-21 10:36:14 -07:00
Viktor Mihajlovski
8691551070 build: Fix RPM build errors related to libvirt-lxc API
Added missing entries to makefile and spec.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-18 09:48:17 -07:00