Enable blockdev mode and convert the expected commands to the modern
equivalents in preparation for removing the old-style hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU supports hotplug of a cdrom device with USB or SCSI bus. Just
unblock these devices in qemuDomainAttachDeviceDiskLiveInternal() and
qemuDomainDetachPrepDisk().
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/261
Signed-off-by: minglei.liu <minglei.liu@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit takes care of following cases:
-> Check availability of requested ports.
->The total number of requested ports should not be more than
VIR_MAX_ISA_SERIAL_PORTS.
->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
isa-serial indices to automatically assign available ports for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The specific machine type is not important for the test. We can use 'pc'
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern QEMUs don't support the machine type at all. Remove it from our
fake caps generator too and adjust test cases which depend on it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virQEMUCapsInitQMPBasicArch in qemuHotplugCreateObjects so that we
also add the always-present capabilities to the set of capabilities used
for the hotplug test and fix fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].
1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.
Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds hostdev test cases in qemuhotplugtest.c.
Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Unit number 7 is kind of special. It's reserved for SCSI
controller. The comment in virDomainSCSIDriveAddressIsUsed()
summarizes that pretty nicely. Libvirt would never generate
such address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Previous two commits demonstrate a hole in our test scenario.
Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
<memballoon model='none'/> is the only way to disable balloon driver
since libvirt will add one automatically if the memballoon element is
missing. In other words, there's no balloon device if model is 'none'
and generating an alias for it makes no sense. The alias will be ignored
when parsing the XML and it will disappear once libvirtd is restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If we're going to add a controller to the domain, let's set the
default SCSI model value if we cannot find another SCSI controller
already present.
NB: Requires updating the live output test data since the model
will now be formatted.
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Raw local files do not pass through the backing store detector and thus
the code did not allocate the required backing store terminator for
them. Previously the terminating element would be formatted into the XML
since the default values used for the metadata allowed that. This is a
regression since a693fdba01 which was not detected in the review.
This patch also reverts all the changes in the test files.
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There's a plan to rework the address handling, so testcases
that verify hotplugging ccw devices will help in avoiding
regression.
In this commit, some files are duplicated because of the way
qemuhotplug.c calculates the expected xml filenames.
I plan on changing that to explicitly stating the basis domain
xml, the device xml, and the expected xml.
This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices. Thanks to that we can
test the domain XMLs in virschematest again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
