Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
Several tests assume that VNC is always available and include it in
their configs and the expected command line. The tests have nothing to
do with graphics display so they shouldn't rely on VNC.
This fixes the problem reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=868389
Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.
The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)
The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name. This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code. This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.
The problems can be experienced with mcstrans for example. The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.
I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.
Thanks Laurent Bigonville for finding this out.
[1] http://oss.tresys.com/git/selinux.git
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.
Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log destinations are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The __LINE__ macro value is specified to fit in the size_t
type, so use that instead of 'long long' in the logging code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log priority levels are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In addition to the preformatted text line, pass the raw message as well,
to allow the output functions to use a different output format.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available
The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.
As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nothing uses the return value, and creating it requries otherwise
unnecessary strlen () calls.
This cleanup is conceptually independent from the rest of the series
(although the later patches won't apply without it). This just seems
a good opportunity to clean this up, instead of entrenching the unnecessary
return value in the virLogOutputFunc instance that will be added in this
series.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The "dump-guest-core' option is new option for the machine type
(-machine pc,dump-guest-core) that controls whether the guest memory
will be marked as dumpable.
While testing this, I've found out that the value for the '-M' options
is not parsed correctly when additional parameters are used. However,
when '-machine' is used for the same options, it gets parsed as
expected. That's why this patch also modifies the parsing and creating
of the command line, so both '-M' and '-machine' are recognized. In
QEMU's help there is only mention of the 'machine parameter now with
no sign of the older '-M'.
This patch cleans up building the "-boot" parameter and while on that
fixes one inconsistency by modifying these things:
- I completed the unfinished virDomainBootMenu enum by specifying
LAST, declaring it and also declaring the TypeFromString and
TypeToString parameters.
- Previously mentioned TypeFromString and TypeToString are used when
parsing the XML.
- Last, but not least, visible change is that the "-boot" parameter
is built and parsed properly:
- The "order=" prefix is used only when additional parameters are
used (menu, etc.).
- It's rewritten in a way that other parameters can be added
easily in the future (used in following patch).
- The "order=" parameter is properly parsed regardless to where it
is placed in the string (e.g. "menu=on,order=nc").
- The "menu=" parameter (and others in the future) are created
when they should be (i.e. even when bootindex is supported and
used, but not when bootloader is selected).
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
Commit ee3d3893 missed the fact that (unsigned char)<<(int)
is truncated to int, and therefore failed for any bitmap data
longer than four bytes.
Also, I failed to run 'make syntax-check' on my commit 4bba6579;
for whatever odd reason, ffs lives in a different header than ffsl.
* src/util/bitmap.c (virBitmapNewData): Use correct shift type.
(includes): Glibc (and therefore gnulib) decided ffs is in
<strings.h>, but ffsl is in <string.h>.
* tests/virbitmaptest.c (test5): Test it.
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).
* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.
And due to the size of the patch (17 lines) I dared to include the tests.
Add separate function parallelsCreateCt, which creates container.
Also add example xml configuration domain-parallels-ct-simple.xml.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make has a builtin operator 'undefine', and coupled with latest
automake.git, this test name ended up confusing make into thinking
the file name was meant to be used as the make operator. Renaming
the file avoids the confusion.
* tests/undefine: Rename...
* tests/virsh-undefine: ...to this.
* tests/Makefile.am (test_scripts): Use new name.
Reported by Jim Meyering.
Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able to test the QEMU monitor code, we need to have a fake
QEMU monitor server. This introduces a simple (dumb) framework
that can do this. The test case registers a series of items to
be sent back as replies to commands that will be executed. A
thread runs the event loop looking for incoming replies and
sending back this pre-registered data. This allows testing all
QEMU monitor code that deals with parsing responses and errors
from QEMU, without needing QEMU around
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch removed the "--filterwin2k" dnsmasq command line
parameter which was unnecessary for domain specification,
possibly blocked some usage, and was command line clutter.
Gene Czarcinski <gene@czarc.net>
On systems without cyrus-sasl-devel available (I happened to be
in that situation on my FreeBSD testing), this test fails rather
miserably:
TEST: libvirtdconftest
.....!!!!!!...!!!!!!!!!!!!!!!!!!!!!!!!! 39 FAIL
FAIL: libvirtdconftest
with verbose output showing things like:
39) Test corruption ... libvir: Config File error : unsupporeted configuration: remoteReadConfigFile: /usr/home/dummy/libvirt/tests/../daemon/libvirtd.conf: auth_tcp: unsupported auth sasl
* tests/libvirtdconftest.c (testCorrupt): Avoid failure when sasl
is missing.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The viratomictest.c was casting from an int to a void* via a
long. This works on Linux or Mingw32, but fails on Mingw64
due to a pointer/integer size mis-match. Replacing 'long'
with 'intptr_t' ensures matching type sizes
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Without this patch, logged command executions can be ambiguous if
the command contained any shell metacharacters. This has caused
more than one person to attempt to patch clients to add unnecessary
quoting, without realizing that the command itself was run with
correct args, and only the logged output was ambiguous.
* src/util/command.c (virCommandToString): Add shell escapes.
* tests/commandtest.c (test16): Test new behavior.
* tests/commanddata/test16.log: Update expected output.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Likewise.
* tests/networkxml2argvdata/*.argv: Likewise.
dnsmasq is forwarding a number of queries upstream that should not
be done. There still remains an MX query for a plain name with no
domain specified that will be forwarded is dnsmasq has --domain=xxx
--local=/xxx/ specified. This does not happen with no domain name
and --local=// ... not a libvirt problem.
BTW, thanks again to Claudio Bley!
This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Qemu command line generation for geometry override and testcases.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:
CCLD storagebackendsheepdogtest
*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!
* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.
This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.
One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).
Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.
Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).
This patch modifies the parser and formatter of the <virtualport>
element in the following ways:
* because most of the attributes in a virNetDevVPortProfile are fixed
size binary data with no reserved values, there is no way to embed a
"this value wasn't specified" sentinel into the existing data. To
solve this problem, the new *_specified fields in the
virNetDevVPortProfile object that were added in a previous patch of
this series are now set when the corresponding attribute is present
during the parse.
* allow parsing/formatting a <virtualport> that has no type set. In
this case, all fields are settable, but all are also optional.
* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
set and an instanceid/interfaceid is expected but not provided, a
random one will be generated. This was previously the default
behavior, but is now done only for virtualports inside an
<interface> definition, not for those in <network> or <portgroup>.
* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
set the parser will call the new
virNetDevVPortProfileCheckComplete() functions at the end of the
parser to check for any missing attributes (based on type), and
return failure if anything is missing. This used to be default
behavior. Now it is only used for the virtualport defined inside an
interface's <actual> element (by the time you've figured out the
contents of <actual>, you should have all the necessary data to fill
in the entire virtualport)
* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
parser will return an error if the virtualport has no type
attribute. This also was previously the default behavior, but isn't
needed in the case of the virtualport for a type='network' interface
(i.e. the exact type isn't yet known), or the virtualport of a
portgroup (i.e. the portgroup just has modifiers for the network's
virtualport, which *does* require a type) - in those cases, the
check will be done at domain startup, once the final virtualport is
assembled (this is handled in the next patch).
Otherwise, in locations like virobject.c where PROBE is used,
for certain configure options, the compiler warns:
util/virobject.c:110:1: error: 'intptr_t' undeclared (first use in this function)
As long as we are making this header always available, we can
clean up several other files.
* src/internal.h (includes): Pull in <stdint.h>.
* src/conf/nwfilter_conf.h: Rely on internal.h.
* src/storage/storage_backend.c: Likewise.
* src/storage/storage_backend.h: Likewise.
* src/util/cgroup.c: Likewise.
* src/util/sexpr.h: Likewise.
* src/util/virhashcode.h: Likewise.
* src/util/virnetdevvportprofile.h: Likewise.
* src/util/virnetlink.h: Likewise.
* src/util/virrandom.h: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenapi/xenapi_utils.h: Likewise.
* src/xenxs/xenxs_private.h: Likewise.
* tests/storagebackendsheepdogtest.c: Likewise.
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
QEMU_CAPS_SCSI_LSI
set the flag when "lsi53c895a", bus PCI, alias "lsi" in
the output of "qemu -device ?"
-device lsi in qemu command line
QEMU_CAPS_VIRTIO_SCSI_PCI
set the flag when "name "virtio-scsi-pci", bus PCI" in
the output of qemu devices query.
-device virtio-scsi-pci in qemu command line
Occasionally some test cases will (accidentally) try to spawn
libvirtd. Set the LIBVIRT_AUTOSTART=0 environment variable to
ensure the remote driver never tries autostart.
The 'virsh-all' test case will invoke each virsh command with
no args. With the 'connect' command this causes virsh to try
to connect to the default URI, which in turn tries to spawn
libvirtd. This is not something we want todo in the test suite,
so skip the 'connect' command.
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
All callers used the same initialization seed (well, the new
viratomictest forgot to look at getpid()); so we might as well
make this value automatic. And while it may feel like we are
giving up functionality, I documented how to get it back in the
unlikely case that you actually need to debug with a fixed
pseudo-random sequence. I left that crippled by default, so
that a stray environment variable doesn't cause a lack of
randomness to become a security issue.
* src/util/virrandom.c (virRandomInitialize): Rename...
(virRandomOnceInit): ...and make static, with one-shot call.
Document how to do fixed-seed debugging.
* src/util/virrandom.h (virRandomInitialize): Drop prototype.
* src/libvirt_private.syms (virrandom.h): Don't export it.
* src/libvirt.c (virInitialize): Adjust caller.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/util/iohelper.c (main): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
* tests/viratomictest.c (mymain): Likewise.
make rpm was failing with the following error:
Entering directory `/home/laine/devel/libvirt/tests'
make[2]: *** No rule to make target `viratomicdata.h',
needed by `distdir'. Stop.
viratomicdata.h is listed in tests/Makefile.am as a dependency of
viratomictest, but doesn't exist, is never referenced, and removing
that dependency permits make rpm to complete successfully.
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.
schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
There are a few issues with the current virAtomic APIs
- They require use of a virAtomicInt struct instead of a plain
int type
- Several of the methods do not implement memory barriers
- The methods do not implement compiler re-ordering barriers
- There is no Win32 native impl
The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.
* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
ops
* tests/viratomictest.c: Test validate to validate safety
of atomic ops.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.
This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong
The cfg.mk file rule to check for tab characters was not
applied to perl files. Much of our Perl code is full of
tabs as a result. Kill them, kill them all !
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
WITH_INTERFACE is not defined, it should be WITH_NETCF there to load
the interface driver.
Eric posted patch weeks ago to resolve the problems in the whole
build system, but it's not finalised yet:
https://www.redhat.com/archives/libvir-list/2012-June/msg01299.html
I'm going to simply fix the wrong macro name here so that the
interface driver could loaded, and continue the work on the listing
API for interface driver.
This patch enhances qemuxml2argvtest to deal with semantically incorrect
domain XMLs, that generate errors while parsing.
This patch cleans up macros that invoke the tests and changes boolean
flags to a bit array flag variable.
When the system doesn't have IPv6 available (e.g. not built into the
kernel or the module isn't loaded), you can not create an IPv6 socket.
The test determines earlier on that IPv6 isn't available then goes and
creates a socket. This makes socket creation conditional on IPv6
availability.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Commit ddd6bef4 switched to the ustar format to fix an issue where
'make dist' fails to create a tarball because we have files with
relative names longer than 100 bytes by the time you include a
'libvirt-0.9.13' prefix. Unfortunately, even with ustar format,
the use of 'tar -ch' tries to convert symlinks to hard links,
also with a name too long (omitting the -h works, but automake
automatically passes -h); such symlinks were added in commit
6dcf98c, which resulted in 'make dist' breaking again. The
solution is to rename the offending symlinks to something shorter,
by shortening the entire nodeinfodata naming scheme.
* tests/nodeinfotest.c (mymain): Shorten test names.
(linuxTestNodeInfo): Accommodate new names.
* tests/nodeinfodata/*: Rename files accordingly.
Commit a56c347 introduced a use of random numbers into seclabel
handling, but failed to initialize the random number generator
in the testsuite. Also, fail with usual status, not 255.
* tests/seclabeltest.c (main): Initialize randomness.
Commit 80533ca forgot to think about offline cpus. When a node
cpu is offline, then its topology/ subdirectory is not present,
leading to spurious error messages leaked to the user such as:
libvir: error : cannot open /home/dummy/libvirt/tests/nodeinfodata/linux-nodeinfo-sysfs-test-6/node/node0/cpu7/topology/physical_package_id: No such file or directory
Fix that, as well as test it; the test data is gathered from a
machine with one NUMA node, hyperthreading, and with 2 of the
8 cpus offline.
* src/nodeinfo.c (virNodeParseNode): Don't parse topology of
offline cpus.
* tests/nodeinfotest.c (mymain): Run new test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-6*: New data.
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
This patch adds test data that describe a machine that has two physical
processors that don't share same core id's on their cores. On this data
the "virsh nodeinfo" reported that the machine had 10 cores per socket
while the processor had only 8. (Before fixing nodeinfo gathering code).
This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.
This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b74,
ac9dd4a676. (Those changes in nodeinfo.c
are efectively reverted by this patch).
This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.
This patch adds test data needed by the new way node information will be
gathered. This patch adds symlinks to cpu cores to their corresponding
node directory.
Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:
if (strstr(def->emulator, "kvm")) {
def->virtType = VIR_DOMAIN_VIRT_KVM;
def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}
Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
Right now, the only way to get at the contents of a virBuffer is
to destroy it. But there are cases in my upcoming patches where
peeking at the contents makes life easier. I suppose this does
open up the potential for bad code to dereference a stale pointer,
by disregarding the docs that the return value is invalid on the
next virBuf operation, but such is life.
* src/util/buf.h (virBufferCurrentContent): New declaration.
* src/util/buf.c (virBufferCurrentContent): Implement it.
* src/libvirt_private.syms (buf.h): Export it.
* tests/virbuftest.c (testBufAutoIndent): Test it.
This fixes the build on 32bit systems which otherwise fails with:
virnetmessagetest.c: In function 'testMessageHeaderEncode':
virnetmessagetest.c:75:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'long unsigned int' [-Werror=format]
Currently, we are allocating buffer for RPC messages statically.
This is not such pain when RPC limits are small. However, if we want
ever to increase those limits, we need to allocate buffer dynamically,
based on RPC message len (= the first 4 bytes). Therefore we will
decrease our mem usage in most cases and still be flexible enough in
corner cases.
QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with
qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early. This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt. The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.
Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.
* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.
This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:
CCLD networkxml2argvtest
*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!
Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.
Based on a suggestion by Daniel P. Berrange.
* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files). However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:
CCLD libvirt_driver_qemu.la
*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects libvirt_qemu_probes.o is not portable!
This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.
* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.
With the switch to modules by default, I was getting super long
test output:
TEST: /home/remote/eblake/libvirt/tests/.libs/lt-interfacexml2xmltest
compared to the former:
TEST: interfacexml2xmltest
* tests/testutils.c (virtTestMain): Trim off libtool goop.
To ensure all symbols used by loadable driver modules are
exported in libvirt.so, add a test suite that simply loads
each driver in turn
* tests/Makefile.am, tests/virdrivermoduletest.c: Add
a test case for loading drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist
* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
by test suite
I'm tired of writing:
bool sep = false;
while (...) {
if (sep)
virBufferAddChar(buf, ',');
sep = true;
virBufferAdd(buf, str);
}
This makes it easier, allowing one to write:
while (...)
virBufferAsprintf(buf, "%s,", str);
virBufferTrim(buf, ",", -1);
to trim any remaining comma.
* src/util/buf.h (virBufferTrim): Declare.
* src/util/buf.c (virBufferTrim): New function.
* tests/virbuftest.c (testBufTrim): Test it.
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.
On the command line iptables supports ipset using
iptables ... -m set --match-set <ipset name> <flags> -j ...
where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:
iptables -A INPUT -m set --match-set test src,src -j ACCEPT
Since ipset management is quite complex, the idea was to leave ipset
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.
Using XML to describe an ipset in an nwfilter rule would then look as
follows:
<rule action='accept' direction='in'>
<all ipset='test' ipsetflags='src,src'/>
</rule>
The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.
FYI: Here is the man page for ipset:
https://ipset.netfilter.org/ipset.man.html
Regards,
Stefan
Make it obvious why we need Osier's patch in commit 10d9038b
to fix NUMA parsing of an AMD machine with two cores sharing
a socket id.
* tests/nodeinfotest.c (linuxTestCompareFiles): Enhance the test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-*-output.txt: Update.
To allow the security drivers to apply different configuration
information per hypervisor, pass the virtualization driver name
into the security manager constructor.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.
The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
The uhci1, uhci2, uhci3 companion controllers for ehci1 must
have a master start port set. Since this value is predictable
we should set it automatically if the app does not supply it
Currently each USB2 companion controller gets put on a separate
PCI slot. Not only is this wasteful of PCI slots, but it is not
in compliance with the spec for USB2 controllers. The master
echi1 and all companion controllers should be in the same slot,
with echi1 in function 7, and uhci1-3 in functions 0-2 respectively.
* src/qemu/qemu_command.c: Special case handling of USB2 controllers
to apply correct pci slot assignment
* tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args,
tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand
test to cover automatic slot assignment
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
This results in output like:
2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]
* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
stack traces
* tests/testutils.c: Adapt to API change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
"Instead of developing one CPU with 12 cores, the Magny Cours is
actually two 6 core “Bulldozer” CPUs combined in to one package"
I.e, each package has two NUMA nodes, and the two numa nodes share
the same core ID set (0-6), which means parsing the cores number
from sysfs doesn't work in this case.
And the wrong CPU number could cause three problems for libvirt:
1) performance lost
A domain without "cpuset" or "placement='auto'" (to drive numad)
specified will be only pinned to part of the CPUs.
2) domain can be started
If a domain uses numad, and the advisory nodeset returned from
numad contains node which exceeds the range of wrong total CPU
number. The domain will fail to start, as the bitmask passed to
sched_setaffinity could be fully filled with zero.
3) wrong CPU number affects lots of stuffs.
E.g. for command "virsh vcpuinfo", "virsh vcpupin", it will always
output with the truncated CPU list.
For more details:
https://www.redhat.com/archives/libvir-list/2012-May/msg00607.html
This patch is to fix the problem by parsing /proc/cpuinfo to get
the value of field "cpu cores", and use it as nodeinfo->cores if
it's greater than the cores number from sysfs.
For pseries guest, the default controller model is
ibmvscsi controller, this controller only can work
on spapr-vio address.
This patch is to assign spapr-vio address type to
ibmvscsi controller and correct vscsi test case.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Test 2 data grabbed from a 2-core 1-node laptop.
Test 3 data grabbed from a 48-cpu AMD Magny Cours box.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-2*: New test data.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-3*: Likewise.
* tests/nodeinfotest.c (mymain): Run them.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
new test files.
We had previously weakened our nodeinfotest in order to ignore parsed
node values, because the parse function was mistakenly relying on
host files. A better fix is to avoid using the numactl library, but
to instead parse the same files that numactl would read, all while
allowing the files to be relative to our choice of directory.
* src/nodeinfo.c (CPU_SYS_PATH, NODE_SYS_PATH): Replace with...
(SYSFS_SYSTEM_PATH): ...parent directory.
(linuxNodeInfoCPUPopulate): Check NUMA nodes from requested
directory (by inlining numactl code).
(nodeGetCPUmap, nodeGetMemoryStats): Adjust macro use.
* tests/nodeinfotest.c (linuxTestCompareFiles, linuxTestNodeInfo):
Update test to match.
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
Alon tried './qemuxml2argvtest --help' to figure out a test failure,
but it didn't help. The information is in HACKING, but it doesn't
hurt to make the tests also provide their own help.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
We only know -lpthread exists on platforms where we build
threads-pthread.c; but when we build threads-win32.c, LIB_PTHREAD
is empty.
* tests/Makefile.am (shunloadtest_LDADD): Use correct library.
Error: RESOURCE_LEAK:
/libvirt/tests/qemuxml2argvtest.c:47:
alloc_arg: Calling allocation function "virAlloc" on "ret".
/libvirt/src/util/memory.c:101:
alloc_fn: Storage is returned from allocation function "calloc".
/libvirt/src/util/memory.c:101:
var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/libvirt/tests/qemuxml2argvtest.c:54:
leaked_storage: Variable "ret" going out of scope leaks the storage it points to.
On cygwin, <rpc/rpc.h> lives in a different directory than
/usr/include, so anything that uses it must modify CFLAGS. This
previously tripped up just 'make check', but now that we build
all test programs unconditionally, it also trips up 'make'.
* tests/Makefile.am (virnetmessagetest_CFLAGS): Find rpc headers.
The recent push to use correct scaling terms (kB for 1000, KiB for
1024 - such as commit 9dfdead) missed some places in virsh.
* tools/virsh.c (prettyCapacity, cmdDominfo, cmdFreecell)
(cmdNodeinfo, cmdNodeMemStats, cmdMigrateSetMaxSpeed)
(cmdBlockCopy, cmdBlockPull, cmdBlockJob): Use KiB, not kB, when
referring to multiples of 1024.
* tests/virshtest.c: Update expected output to match.
