https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
