Luckily, the new URL still points to the same location, the only change
is in the document name where an escaped space (%20) was replaced by an
underscore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Device attribute does not have dotted "portAddr" format. Instead it
has single number format described but "usbAddr" which corresponds
to device parsing code in virDomainHostdevSubsysUSBDefParseXML.
Looks like [1] mistakenly changed device format for hostdev devices.
And [2] copy-n-paste this for hostdev network interfaces.
[1] 31710a53 Modify USB port to be defined as a port path
[2] 3b1c191f conf: parse/format type='hostdev' network interfaces
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Document that using bhyve:commandline is not fully
supported and may cause issues.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch restores broken guest network connectivity after a host
firewalld is switched to using an nftables backend. It does this by
adding libvirt networks' bridge interfaces to the new "libvirt" zone
in firewalld.
After this patch, the bridge interface of any network created by
libvirt (when firewalld is active) will be added to the firewalld
zone called "libvirt" if it exists (regardless of the firewalld
backend setting). This behavior does *not* depend on whether or not
libvirt has installed the libvirt zone file (set with
"--with[out]-firewalld-zone" during the configure phase of the package
build).
If the libvirt zone doesn't exist (either because the package was
configured to not install it, or possibly it was installed, but
firewalld doesn't support rule priorities, resulting in a parse
error), the bridge will remain in firewalld's default zone, which
could be innocuous (in the case that the firewalld backend is
iptables, guest networking will still function properly with the
bridge in the default zone), or it could be disastrous (if the
firewalld backend is nftables, we can be assured that guest networking
will fail). In order to be unobtrusive in the former case, and
informative in the latter, when the libvirt zone doesn't exist we
then check the firewalld version to see if it's new enough to support
the nftables backend, and then if the backend is actually set to
nftables, before logging an error (and failing the net-start
operation, since the network couldn't possibly work anyway).
When the libvirt zone is used, network behavior is *slightly*
different from behavior of previous libvirt. In the past, libvirt
network behavior would be affected by the configuration of firewalld's
default zone (usually "public"), but now it is affected only by the
"libvirt" zone), and thus almost surely warrants a release note for
any distro upgrading to libvirt 5.1 or above. Although it's
unfortunate that we have to deal with a mandatory behavior change, the
architecture of multiple hooks makes it impossible to *not* change
behavior in some way, and the new behavior is arguably better (since
it will now be possible to manage access to the host from virtual
machines vs from public interfaces separately).
Creates-and-Resolves: https://bugzilla.redhat.com/1650320
Resolves: https://bugzilla.redhat.com/1638342
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We should not give domains access to something they don't necessarily
need by default. Remove it from the qemu driver docs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The custom namespaces were originally registered against the storage
pool source struct, but during review this was changed to the top level
storage pool struct. The namespace URIs were not updated to match, so
had a redundant '/source' component.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Big number itself does not make much sense in some cases. Format the
bitshift format as well.
Changes our web page docs from:
VIR_MIGRATE_POSTCOPY = 32768 : Setting the VIR_MIGRATE_POSTCOPY...
VIR_MIGRATE_TLS = 65536 : Setting the VIR_MIGRATE_TLS flag...
to:
VIR_MIGRATE_POSTCOPY = 32768 (0x8000; 1 << 15) : Setting the VIR_MIGRATE_POSTCOPY...
VIR_MIGRATE_TLS = 65536 (0x10000; 1 << 16) : Setting the VIR_MIGRATE_TLS flag...
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.
Based off original patch/concept:
https://www.redhat.com/archives/libvir-list/2014-May/msg00940.html
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.
Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.
Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.
Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Document the <bhyve:commandline> element which allows
to inject custom command line arguments for bhyve.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Implement support for passing custom command line arguments
to bhyve using the 'bhyve:commandline' element:
<bhyve:commandline>
<bhyve:arg value='-newarg'/>
</bhyve:commandline>
* Define virDomainXMLNamespace for the bhyve driver, which
at this point supports only the 'commandline' element
described above,
* Update command generation code to inject these command line
arguments between driver-generated arguments and the vmname
positional argument.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
A couple places in the docs didn't get updated when the forward mode
"open" was added.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no "GNU Lesser General Public License, version 2",
only version 2.1 and later. In "version 2", the license was
still called "Library" instead of "Lesser". So assume that
version 2.1 is meant here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Found that it was missing in formatstorage and had a few typos
in the storage driver page.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
PolicyKit authentication rules have switched to a JavaScript based
format quite some time ago. See:
http://davidz25.blogspot.com/2012/06/authorization-rules-in-polkit.html
While backwards compat for the old .pkla format is still available, it
makes sense to point people first at the new format.
The SSHPolicyKitSetup wiki page seems pretty stale, so remove the
reference to it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Turns out, that there are few bugs that are not that trivial to
fix (e.g. around block jobs). Instead of rushing in not
thoroughly tested fixes disable the feature temporarily for the
release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The entry, introduced by commit 3934beb857, ended up
inside a comment instead of the XML document proper, and
as such didn't show up in the generated files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently, all of the VirtioOptions are under a single <optional>
element, however, neither our parser/formatter or QEMU driver requires
the presence of all the options if only a single one from the set has
been specified, so fix it and silence the schema validator.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
/domain/memtune/hard_limit provides a way to cap the memory a VM process
can use, including the amount of memory the process can lock. When memory
locking of a VM is requested, <hard_limit> can be used to prevent the
potential host DoS issue mentioned in /domain/memoryBacking/locked
description.
This patch improves the <hard_limit> text by clarifying it can be used
to prevent "host crashing" when VM memory is locked.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.
An example log file entry now looks like this:
2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
LC_ALL=C \
PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
HOME=/home/berrange \
USER=berrange \
LOGNAME=berrange \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-ppc64 \
-name guest=guest,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
-machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
-m 1024 \
-realtime mlock=off \
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=23,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The schema expects it to match the pattern
v[0-9]+\.[0-9]+\.[0-9]+
which "5.0.0" clearly doesn't, causing the build to fail.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>