To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With xend on the way out, installations may not even have
/usr/sbin/xend, which results in the following error when the
drivers are probed
2014-04-28 18:21:19.271+0000: 22129: error : virCommandWait:2426 :
internal error: Child process (/usr/sbin/xend status) unexpected exit
status 127: libvirt: error : cannot execute binary /usr/sbin/xend:
No such file or directory
Check for existence of /usr/sbin/xend before trying to run it with
the 'status' option.
Currently the driver only exposes the ability to connect to the serial console
of a Xen guest, which doesn't work for a PV guest. Since for an HVM guest the
serial devices are duplicated as consoles it is sufficient to just use the
console devices unconditionally.
Tested with the following bit of config XML:
<domain type='xen'>
...
<devices>
<console type='pty'>
<target type='xen'/>
</console>
</devices>
</domain>
I have observed and tested this on ARM but I believe it also applies to x86 PV
guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Clark Laughlin <clark.laughlin@linaro.org>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.
This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit d9f19c30d0 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().
This causes the daemon to fail on systems that have not had the directory
created before.
Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Part of a series of cleanups to use new accessor methods.
* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the domain event handler and shutdown thread out of the main
driver module and into libxl_domain module
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Include a pointer to the libxl driver in libxlDomainObjPrivate
object so it can be used in the domain event handler and
shutdown thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmStart from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules. For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxl driver reads /proc/xen/capabilities to see if it
is on a Dom0 kernel. If that file does not even exist though,
an error is logged. Check for the file existance before trying
to read its contents to avoid the log message.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
As soon as any guest mounts xenfs to /proc/xen, there is a capabilities
file in that directory. However it returns nothing when reading from it.
Change the test to actually check the contents of the file.
BugLink: http://bugs.launchpad.net/bugs/1248025
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Supporting sexpr in connectDomainXMLFromNative in the libxl driver
adds flexibility for users importing legacy Xen configuration into
libvirt. E.g. this patch allows importing previous xend-managed
domains from /var/lib/xend/domains/<dom-uuid>/config.sxp into the
libvirt libxl driver.
The shutdown handler may restart a domain when handling a reboot
event or when <on_*> is set to 'restart'. Restarting consists of
calling libxlVmCleanup followed by libxlVmStart. libxlVmStart will
emit a VIR_DOMAIN_EVENT_STARTED event, but the SHUTDOWN event is
not emitted until exiting the shutdown handler, after the STARTED
event.
This patch changes the logic a bit to queue the event at the start
of the shutdown action, ensuring it is queued before any subsequent
events that may be generated while executing the shutdown action.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver was ignoring the <on_*> domain event configuration,
causing e.g. a domain to be rebooted even when on_reboot is set to
destroy.
This patch honors the <on_*> configuration in the shutdown event
handler.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Dumping a domain's core can take considerable time. Use the
recently added job functions and unlock the virDomainObj while
dumping core.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Saving domain memory and cpu state can take considerable time.
Use the recently added job functions and unlock the virDomainObj
while saving the domain.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When explicitly destroying a domain (libxlDomainDestroyFlags), or
handling an out-of-band domain shutdown event, cleanup the domain
in the context of a job. Introduce libxlVmCleanupJob to wrap
libxlVmCleanup in a job block.
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function, which only has five call sites, simply calls
libxl_domain_destroy and libxlVmCleanup. Call those functions
directly at the call sites, allowing more control over how a
domain is destroyed and cleaned up. This patch maintains the
existing semantic, leaving changes to a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A small fix for the possiblitiy of jumping to an error path before
registering for domain events, preventing receiving important ones
like shutdown and death.
