https://bugzilla.redhat.com/show_bug.cgi?id=1214369
My fix 671d18594f was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With glibc >= 2.25.90 writev() is only available if you explicitly
include sys/uio.h. This matches the documented requirements, but
older glibc and other *NIX pulled in writev indirectly so the bug
wasn't noticed previously.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the current logic, we only free @tlsalias as part of the error
label and would have to free it explicitly earlier in the code. Convert
the error label to cleanup, so that we have only one sink, where we
handle all frees. Since JSON object append operation consumes pointers,
make sure @backend is cleared before we hit the cleanup label.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1455819
It may happen that a domain is started without any huge pages.
However, user might try to attach a DIMM module later. DIMM
backed by huge pages (why would somebody want to mix regular and
huge pages is beyond me). Therefore we have to create the dir if
we haven't done so far.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1455819
Currently, the per-domain path for huge pages mmap() for qemu is
created iff domain has memoryBacking and hugepages in it
configured. However, this alone is not enough because there can
be a DIMM module with hugepages configured too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right now, there is a lot of exit points from the function.
Depending on their position they need to copy the same free
calls. This goes against our style where we usually have just one
exit point from the function which also does the necessary free.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v3.4.0-44-gac793bd71 fixed a memory leak, but failed to return
the special -3 value. Thus an attempt to start a domain with corrupted
managed save file would removed the corrupted file and report
"An error occurred, but the cause is unknown" instead of starting the
domain from scratch.
https://bugzilla.redhat.com/show_bug.cgi?id=1460962
@rundir, allocated by virGetUserRuntimeDirectory, is leaked in case
virFileMakePath fails.
Signed-off-by: Xi Xu <xu.xi8@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Add a comment for mon->watch to make clear what's the purpose of this
value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
The virDomainUSBAddressEnsure returns 0 or -1, so commit id 'de325472'
checking for 1 like qemuDomainAttachChrDeviceAssignAddr was wrong.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Commit 824272cb28 attempted to fix escaping of characters in unix
socket path but it was wrong. We need to escape only ',', there is
no escape character for '='.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
https://bugzilla.redhat.com/show_bug.cgi?id=1447618
Currently, any attempt to change MTU on an interface that is
plugged to a running domain is silently ignored. We should either
do what's asked or error out. Well, we can update the host side
of the interface, but we cannot change 'host_mtu' attribute for
the virtio-net device. Therefore we have to error out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1408701
While implementing MTU (572eda12ad and friends), I've forgotten
to actually set MTU on the host NIC in case of hotplug. We
correctly tell qemu on the monitor what the MTU should be, but we
are not actually setting it on the host NIC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
We try to get the last element of the passed path by calling
strrch(path, '/'). However, the pointer that strrchr() returns
points at the slash, We want string that starts right after that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While reworking client side of streams, I had to postpone payload
decoding so that stream holes and stream data can be
distinguished in virNetClientStreamRecvPacket. That's merely what
18944b7aea does. However, I accidentally removed one important
bit: when server sends us an empty STREAM packet (with no
payload) - meaning end of stream - st->incomingEOF flag needs to
be set. It used to be before I touched the code. After I removed
it, virNetClientStreamRecvPacket will try to fetch more data from
the stream, but it will never come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In 9cb891141c we've introduced some logic to clearing suggested
macvtap/macvlan ifnames. The logic consists of comparing ifname
string with strings that libvirt would generate. However, due to
a typo only VIR_NET_GENERATED_MACVTAP_PREFIX was compared. Twice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 24d4a0a1f removed the non-existent "dying" state from the list
of possible domain states given in the virsh manpage, but didn't
correct the count of states from 8 down to 7. This patch fixes that
mismatch by completely removing any reference to the exact number of
states (thus preventing a potential future mismatch), while wording
the sentence in a more readable/truthful manner.
When adding the aliased serial stub console, the structure wasn't
properly allocated (VIR_ALLOC instead of virDomainChrDefNew) which then
resulted in SIGSEGV in virDomainChrSourceIsEqual during a serial device
coldplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1434278
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If QEMU is new enough and we have the live updated CPU definition in
either save or migration cookie, we can use it to enforce ABI. The
original guest CPU from domain XML will be stored in private data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
