Commit Graph

1643 Commits

Author SHA1 Message Date
Michal Privoznik
688994364f virsocket: Introduce virSocketAddrIsWildcard
This internal API checks, if passed address is a wildcard address.
2013-06-07 15:21:57 +02:00
Ján Tomko
5debc7224a qemu: change two-state int parameters to bool 2013-06-06 17:22:53 +02:00
Ján Tomko
e557766c3b Replace two-state local integers with bool
Found with 'git grep "= 1"'.
2013-06-06 17:22:53 +02:00
Michal Privoznik
e5fa9db17e qemu: Reformat listen address prior to checking
Currently, a listen address for a SPICE server can be specified. Later,
when the domain is migrated, we need to relocate the graphics which
involves telling new destination to the SPICE server. However, we can't
just assume the listen address is the new location, because the listen
address can be ANYCAST (0.0.0.0 for IPv4, :: for IPv6). In which case,
we want to pass the remote hostname. But there are some troubles with
ANYCAST. In both IPv4 and IPv6 it has many ways for specifying such
address. For instance, in IPv4: 0, 0.0, 0.0.0, 0.0.0.0.  The number of
variations gets bigger in IPv6 world. Hence, in order to check for
ANYCAST address sanely, we should take the provided listen address,
parse it and format back in it's full form. Which is exactly what this
patch does.
2013-06-06 08:31:09 +02:00
Peter Krempa
b922c3d51a storagevolxml2argvtest: Report better error messages on test failure
If the creation of the commandline failed, libvirt always reported "out
of memory" from the virCommandToString function rather than the proper
error that happened in virStorageBackendCreateQemuImgCmd. Error out
earlier.
2013-06-05 14:43:16 +02:00
Ján Tomko
a83b77dd73 tests: fix typo in securityselinuxtest 2013-06-04 13:17:30 +02:00
Osier Yang
622aaa0ac2 Storage: Fix the indention of rbd test file 2013-06-03 11:20:01 +08:00
Osier Yang
cdb9789559 conf: Generate address for scsi host device automatically
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).

Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
2013-06-01 10:00:23 +08:00
Eric Blake
3d2b971518 build: skip qemu in tests when !WITH_QEMU
A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:

In file included from ../../src/qemu/qemu_command.h:30:0,
                 from ../../tests/testutilsqemu.h:4,
                 from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"

But since testutilsqemu.c is already conditional, the header
should be likewise.

* tests/testutilsqemu.h: Make content conditional.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-31 11:35:34 -06:00
Daniel P. Berrange
a261996255 Introduce virFilePrintf() as a portable fprintf()
We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.

But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-31 10:51:33 -06:00
Michal Privoznik
c93571968b virStrndup: Accept negative values as string length
It may shorten the code a bit as the following pattern:

  VIR_STRNDUP(dst, src, cond ? n : strlen(src))

is used on several places among our code. However, we can
move the strlen into virStrndup and thus write just:

  VIR_STRNDUP(dst, src, cond ? n : -1)
2013-05-24 16:59:30 +02:00
Viktor Mihajlovski
eb21408f44 cgroups: Do not enforce nonexistent controllers
Currently, the controllers argument to virCgroupDetect acts both as
a result filter and a required controller specification, which is
a bit overloaded. If both functionalities are needed, it would be
better to have them seperated into a filter and a requirement mask.
The only situation where it is used today is to ensure that only
CPU related controllers are used for the VCPU directories. But here
we clearly do not want to enforce the existence of cpu, cpuacct and
specifically not cpuset at the same time.
This commit changes the semantics of controllers to "filter only".
Should a required mask ever be needed, more work will have to be done.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-24 12:11:24 +02:00
Michal Privoznik
7e744f8199 Introduce /domain/devices/interface/driver/@queues attribute
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
2013-05-22 16:31:27 +02:00
Guannan Ren
3c53984412 qemu: add ', share=<policy>' to qemu commandline
example: qemu ${otherargs} \
             -vnc 127.0.0.1:0,share=allow-exclusive
2013-05-22 19:18:48 +08:00
Guannan Ren
d377d02dc4 qemu: new vnc display sharing policy caps flag
QEMU_CAPS_VNC_SHARE_POLICY (qemu >= 1.1)
2013-05-22 19:18:37 +08:00
Osier Yang
bb3ea8416b tests/: Remove the whitespace before ";" 2013-05-21 23:41:45 +08:00
John Ferlan
995bf76d17 shunloadtest: Resolve Coverity CHECKED_RETURN error
The shunloadStart function didn't check the status of virInitialize which
was flagged by Coverity.  Adjust the function and shunloadtest in order
to handle the situation.
2013-05-21 09:22:21 -04:00
John Ferlan
01757a46ee xencapstest: Resolve Coverity CHECKED_RETURN error
The return from virInitialize() needs to be checked.
2013-05-21 09:22:21 -04:00
Eric Blake
d7f53c7b97 maint: use LGPL correctly
Several files called out COPYING or COPYING.LIB instead of using
the normal boilerplate.  It's especially important that we don't
call out COPYING from an LGPL file, since COPYING is traditionally
used for the GPL.  A few files were lacking copyright altogether.

* src/rpc/gendispatch.pl: Add missing copyright.
* Makefile.nonreentrant: Likewise.
* src/check-symfile.pl: Likewise.
* src/check-symsorting.pl: Likewise.
* src/driver.h: Likewise.
* src/internal.h: Likewise.
* tools/libvirt-guests.sh.in: Likewise.
* tools/virt-pki-validate.in: Mention copyright in comment, not just code.
* tools/virt-sanlock-cleanup.in: Likewise.
* src/rpc/genprotocol.pl: Spell out license terms.
* src/xen/xend_internal.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* Makefile.am: Likewise.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* docs/schemas/Makefile.am: Likewise.
* examples/apparmor/Makefile.am: Likewise.
* examples/domain-events/events-c/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* examples/hellolibvirt/Makefile.am: Likewise.
* examples/openauth/Makefile.am: Likewise.
* examples/python/Makefile.am: Likewise.
* examples/systemtap/Makefile.am: Likewise.
* examples/xml/nwfilter/Makefile.am: Likewise.
* gnulib/lib/Makefile.am: Likewise.
* gnulib/tests/Makefile.am: Likewise.
* include/Makefile.am: Likewise.
* include/libvirt/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* configure.ac: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:03:48 -06:00
Osier Yang
3a6204cbbd qemu: Add callback struct for qemuBuildCommandLine
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.

And there might be other places which need to access sysfs files
when building qemu command line in future.

Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.

* src/qemu/qemu_command.h: (New callback struct
                            qemuBuildCommandLineCallbacks;
                            extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
                             callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
2013-05-20 20:14:19 +08:00
Viktor Mihajlovski
4fb50623a7 test: fix VPATH fchosttest failure
Running make check in a VPATH configured build directory fails
in fchosttest as the test data files are searched for relative to
the current working directory.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-17 12:09:52 +02:00
Ján Tomko
25b98d31ec schema: make source optional in volume XML
We don't parse it anyway.

https://bugzilla.redhat.com/show_bug.cgi?id=893273
2013-05-17 08:35:08 +02:00
Ján Tomko
a07b88ee03 schema: require target path in storage pool xml
Make target path mandatory for pool types that require target,
since we refuse to parse a target without a path.

https://bugzilla.redhat.com/show_bug.cgi?id=893273
2013-05-17 08:33:22 +02:00
Osier Yang
9049d6a8c7 qemu: Change values of disk discard
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.

"on" maps to "unmap", "off" maps to "ignore":

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>
2013-05-17 13:03:25 +08:00
Jiri Denemark
fd74f74fe6 qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
Osier Yang
6765316093 conf: Introduce sgio for hostdev
"sgio" is only valid for scsi host device.
2013-05-17 00:46:44 +08:00
Osier Yang
f2c1d9a804 conf: Introduce <shareable> for hostdev
Unlike disk device, the scsi-generic always writethrough the data,
so no need to introduce a "cache" tag, and set "cache=off".
2013-05-16 23:41:25 +08:00
Osier Yang
e3b40bec42 conf: Fix the bug of disk->copy_on_read formating
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
2013-05-16 23:07:51 +08:00
Eric Blake
504b4a8dae string: test VIR_STRDUP
The surest way to avoid regressions is to test documented behavior :)

* tests/virstringtest.c (testStrdup): New test case.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-15 19:28:00 -06:00
John Ferlan
a2c37618d3 Adjust improperly formatted <sysinfo> uuid
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:

virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string

This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID.  As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.

Added a test for uuid comparison within sysinfo.
2013-05-15 12:05:22 -04:00
John Ferlan
21540f5ee3 Validate the bios_date format for <sysinfo>
Add incorrectly formatted bios_date validation test
2013-05-15 12:05:22 -04:00
Osier Yang
a7c4202cdd qemu: Support discard for disk
QEMU introduced "discard" option for drive since commit a9384aff53,

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

This patch exposes the support in libvirt.

QEMU supported "discard" for "-drive" since v1.5.0-rc0:

% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1

So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
2013-05-15 19:01:00 +08:00
Martin Kletzander
85ec7ff6fd qemu: Add VNC WebSocket support
Adding a VNC WebSocket support for QEMU driver.  This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
2013-05-15 09:48:05 +02:00
Osier Yang
5606c7a867 tests: Sort the EXTRA_DIST list
Commit 1cc8259bfe fixes the build failure, but forgot to keep the
list alphanumeric sorted.
2013-05-15 11:34:27 +08:00
Osier Yang
77b54b9661 qemu: New XML to disable memory merge at guest startup
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>

The XML tag is same with what we used internally for old RHEL.
2013-05-15 11:25:45 +08:00
Daniel P. Berrange
8639bc5db4 Rename rbd-invalid.xml to rbd-no-colon.xml
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-14 20:09:48 +01:00
Osier Yang
1cc8259bfe tests: Add fchostdata in EXTRA_DIST
Pushed under build-breaker rule.
2013-05-15 01:18:26 +08:00
Daniel P. Berrange
2a2bc1517a Forbid use of ':' in RBD pool names
The QEMU command line syntax for RBD disks is

   file=rbd:pool/image:opt1=val1:opt2=val2...

There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-14 15:02:42 +01:00
Daniel P. Berrange
78cff68ca3 Workaround issue with clang and inline functions with static vars
Clang does not like it when you pass a static variable to an
inline function

 vircgroupmock.c:462:22: error: static variable 'fakesysfsdir' is
  used in an inline function with external linkage [-Werror,-Wstatic-in-inline]

Just make the var non-static to avoid this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-14 15:00:22 +01:00
Eric Blake
bd56d0d813 qemu: query command line options in QMP
Ever since the conversion to using only QMP for probing features
of qemu 1.2 and newer, we have been unable to detect features
that are added only by additional command line options.  For
example, we'd like to know if '-machine mem-merge=on' (added
in qemu 1.5) is present.  To do this, we will take advantage
of qemu 1.5's query-command-line-parameters QMP call [1].

This patch wires up the framework for probing the command results;
if the QMP command is missing, or if a particular command line
option does not output any parameters (for example, -net uses
a polymorphic parser, which showed up as no parameters as of qemu
1.5), we silently treat that command as having no results.

[1] https://lists.gnu.org/archive/html/qemu-devel/2013-04/msg05180.html

* src/qemu/qemu_monitor.h (qemuMonitorGetOptions)
(qemuMonitorSetOptions)
(qemuMonitorGetCommandLineOptionParameters): New functions.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
* src/qemu/qemu_monitor.c (_qemuMonitor): Add cache field.
(qemuMonitorDispose): Clean it.
(qemuMonitorGetCommandLineOptionParameters): Implement new function.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
(testQemuMonitorJSONGetCommandLineParameters): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-13 15:15:54 -06:00
Eric Blake
764bb5e5aa qemu: use bool in monitor struct
Follows on the heels of other bool cleanups, such as commit 93002b98.

* src/qemu/qemu_monitor.h (qemuMonitorOpen, qemuMonitorOpenFD):
Update json parameter type.
* src/qemu/qemu_monitor.c (qemuMonitorOpen, qemuMonitorOpenFD):
Likewise.
(_qemuMonitor): Adjust field type.
* src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLParse): Adjust
client.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* tests/qemumonitortestutils.c (qemuMonitorTestNew): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-13 15:15:54 -06:00
Eric Blake
547a7c778a json: support removing a value from an object
In an upcoming patch, I need the way to safely transfer a nested
virJSON object out of its parent container for independent use,
even after the parent is freed.

* src/util/virjson.h (virJSONValueObjectRemoveKey): New function.
(_virJSONObject, _virJSONArray): Use correct type.
* src/util/virjson.c (virJSONValueObjectRemoveKey): Implement it.
* src/libvirt_private.syms (virjson.h): Export it.
* tests/jsontest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-13 15:15:54 -06:00
Gene Czarcinski
ccff335f83 Support for static routes on a virtual bridge
network: static route support for <network>

This patch adds the <route> subelement of <network> to define a static
route.  the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".

These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:

  ip route add <address>/<prefix> via <gateway> \
               dev <virbr-bridge> proto static metric <metric>

Tests are done to validate that the input data are correct.  For
example, for a static route ip definition, the address must be a
network address and not a host address.  Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).

prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.

Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:

    RTNETLINK answers: File exists

This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future).  Caution should be
used when manipulating route metrics, especially for a default route.

Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better.  But,
that is being left as an exercise for another day.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-05-13 16:14:40 -04:00
Eric Blake
84f3777a79 build: avoid shadowed variable in fdstreamtest
On RHEL 6.4 (gcc 4.4.7), I got:

fdstreamtest.c: In function 'testFDStreamReadCommon':
fdstreamtest.c:44: error: declaration of 'tmpfile' shadows a global declaration [-Wshadow]

* tests/fdstreamtest.c (testFDStreamReadCommon)
(testFDStreamWriteCommon): Rename 'tmpfile' variable.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-13 13:38:18 -06:00
Daniel P. Berrange
13579d4544 Add 'nbd' as a valid filesystem driver type
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-13 13:15:19 +01:00
Daniel P. Berrange
ada14b86cc Add support for storage format in FS <driver>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.

Anyway for disks we have

   <driver name="qemu" type="raw"/>

And for filesystems this change means we now have

   <driver type="loop" format="raw"/>

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-13 13:15:19 +01:00
Osier Yang
bab6ee6b30 qemu: Support bootindex for scsi host device 2013-05-13 19:08:32 +08:00
Osier Yang
f4bb7b4807 Introduce <readonly> for hostdev
Since it's generic enough to be used by other types in future, I
put it in <hostdev> as sub-element, though now it's only used by
scsi host device.
2013-05-13 19:02:40 +08:00
Han Cheng
0d70656afd qemu: Build qemu command line for scsi host device
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:

  libvirt     qemu
-----------------------------------------
  controller  bus ($libvirt_controller.0)
  bus         channel
  target      scsi-id
  unit        lun

For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).

  libvirt            qemu
----------------------------------------------------------
  controller && bus  bus ($libvirt_controller.$libvirt_bus)
  unit               scsi-id

It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:

static const struct SCSIBusInfo megasas_scsi_info = {
    .tcq = true,
    .max_target = MFI_MAX_LD,
    .max_lun = 255,

    .transfer_data = megasas_xfer_complete,
    .get_sg_list = megasas_get_sg_list,
    .complete = megasas_command_complete,
    .cancel = megasas_command_cancel,
};

Example of the qemu command line (lsilogic controller):

  -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
  -device scsi-generic,bus=scsi0.0,scsi-id=8,\
  drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0

Example of the qemu command line (virtio-scsi controller):

  -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
  -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
  drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-13 18:50:16 +08:00
Han Cheng
b238c0bec1 qemu: New cap flags for scsi-generic
Adding two cap flags for scsi-generic:
  QEMU_CAPS_SCSI_GENERIC
  QEMU_CAPS_SCSI_GENERIC_BOOTINDEX

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-13 18:30:26 +08:00
Han Cheng
5c811dcec5 conf: Generic XMLs for scsi hostdev
An example of the scsi hostdev XML:

    <hostdev mode='subsystem' type='scsi'>
      <source>
        <adapter name='scsi_host0'/>
        <address bus='0' target='0' unit='0'/>
      </source>
      <address type='drive' controller='0' bus='0' target='4' unit='8'/>
    </hostdev>

Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.

The device address must be specified manually. Later patch will let
libvirt generate it automatically.

This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-13 18:23:50 +08:00
Osier Yang
9706d85fe9 tests: Add tests for fc_host
Since the NPIV machine is not easy to get, it's very likely to
introduce regressions when doing changes on the existing code.
This patch dumps part of the sysfs files (the necessary ones)
of fc_host as test input data, to test the related util functions.
It could be extended for more fc_host related testing in future.
2013-05-13 17:24:18 +08:00
Daniel P. Berrange
31989e66c6 Add a test case for the fdstream file read/write code
Add a test case which exercises the virFDStreamOpenFile
and virFDStreamCreateFile methods. Ensure that both the
synchronous and non-blocking iohelper code paths work.
This validates the regression recently fixed which
broke reading in non-blocking mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-10 19:57:18 +01:00
Laine Stump
bfe7721d50 util: move virFile* functions from virutil.c to virfile.c
These all existed before virfile.c was created, and for some reason
weren't moved.

This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.

This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
2013-05-10 13:09:30 -04:00
John Ferlan
7ca784c4a5 Build breaker - requires VIR_FROM_THIS 2013-05-10 08:52:43 -04:00
Michal Privoznik
e60b9783e1 Adapt to VIR_STRDUP and VIR_STRNDUP in tests/* 2013-05-10 11:54:29 +02:00
Eric Blake
1d21b884a3 tests: use portable shell code
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension.  For example:

nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected

Also, there is no need to spawn a grep process when shell globbing
can do the same.

* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-09 11:46:45 -06:00
Daniel P. Berrange
7c5752dd57 Disable some URI tests on older libxml2
Older versions of libxml2 could not correctly parse certain
URIs. This causes test failures. There's nothing libvirt can
do about this, so disable the problem tests on old libxml2
versions

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-09 17:02:18 +01:00
Ján Tomko
1d96440a06 conf: don't crash on a tpm device with no backends
Print an error instead of crashing when a TPM device without
a backend is specified.

Add a test for tpm device with no backend, which should fail
with a parse error.

https://bugzilla.redhat.com/show_bug.cgi?id=961252
2013-05-09 14:25:11 +02:00
Ján Tomko
470d5c4654 tests: files named '.*-invalid.xml' should fail validation
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.

Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
2013-05-09 14:25:11 +02:00
Daniel Hansel
e914dcfdaa rpc: message related sizes enlarged
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).

Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.

To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-07 13:29:58 +02:00
Eric Blake
c21c38d71b build: clean up stray files found by 'make distcheck'
'make distcheck' complained:

ERROR: files left in build directory after distclean:
./python/libvirt.pyc
./tests/commandhelper.log

Problems introduced in commits f015495 and 25ea8e4 (both v1.0.3).

* tests/commandtest.c (test21): Check (and clean) log file.
* tests/commanddata/test21.log: New file.
* python/Makefile.am (CLEANFILES): Clean up compiled python files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-06 14:01:08 -06:00
Laine Stump
cc8f9e677c util: fix compile errors caused by moving string functions
commit 7c9a2d8 missed adding in a few #include "virstring.h"s, causing
builds to fail.
2013-05-02 13:27:19 -04:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Viktor Mihajlovski
3a82f628a9 S390: Do not generate a default USB controller
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-04-30 19:18:43 -06:00
Ján Tomko
dfb4834940 qemu: honor allowDiskFormatProbing when parsing command line
My commit 024e9af broke this.
2013-04-29 15:52:02 +02:00
Ján Tomko
877bc08947 qemu: don't always reserve PCI addresses for implicit controllers
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus  because the command
line for it is just '-usb', with no mention of the PCI bus.

The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.

Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.

Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
2013-04-27 12:55:46 +02:00
Laine Stump
d64e114f14 network: support <driver name='vfio'/> in network definitions
I remembered to document this bit, but somehow forgot to implement it.

This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).

Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.

(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
2013-04-26 21:51:12 -04:00
Ján Tomko
a12475bd44 qemu: don't assign a PCI address to 'none' USB controller
Adjust the usb-none test, since it gives the memballoon a lower PCI slot now.
Add a test for 'none' controller on s390, which doesn't have PCI buses.
2013-04-26 20:06:01 +02:00
Daniel P. Berrange
f3662737b1 Do proper escaping of cgroup resource partitions
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".

Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
9ddfe7eea6 Ensure all cgroup partitions have a suffix of ".partition"
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
824e86e723 Change VM cgroup suffix from '{lxc,qemu}.libvirt' to 'libvirt-{lxc,qemu}'
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Stefan Berger
7e77f252bd test: Add JSON test for query-tpm-types
Add a test case for query-tpm-models QMP command.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2013-04-26 08:33:44 -04:00
Laine Stump
731b0f36f1 qemu: use vfio-pci on commandline when appropriate
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).

Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.

This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.

qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>

These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
2013-04-25 21:28:10 -04:00
Martin Kletzander
a553dbedb8 Fix usb master startport parsing
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose).  Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
2013-04-25 14:54:46 +02:00
Ján Tomko
9d6e56dbce qemu: auto-add bridges and allow using them
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.

Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
2013-04-25 13:19:40 +02:00
Ján Tomko
b33eb0dca1 qemu: auto-add pci-root controller for pc machine types
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
2013-04-25 13:05:10 +02:00
liguang
d350a34caf qemu: build command line for pci-bridge device
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2013-04-25 12:54:59 +02:00
Ján Tomko
024e9af3e5 qemu: call post-parse callbacks when parsing command line too
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.
2013-04-25 12:10:22 +02:00
Li Zhang
dfd0e4f7f2 qemu: Add command line builder and parser for NVRAM.
This patch is to add command line builder and parser
for NVRAM device, and add test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-25 16:50:45 +08:00
Osier Yang
45d6c67143 Introduce a sub-element <driver> for controller
Like what we did for "disk", "filesystem" and "interface", this
introduces sub-element <driver> for "controller", and put the "queues"
into it.
2013-04-25 12:10:58 +08:00
Osier Yang
18b428980f Change the tag name "num_queues" into "queues"
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
2013-04-24 23:36:07 +08:00
Peter Krempa
20cb7f3a41 qemu: Improve handling of channels when generating SPICE command line
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.

This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
2013-04-24 14:37:57 +02:00
Daniel P. Berrange
d407a11eab Dedicated name for sub-driver open/close methods
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:54 +01:00
Daniel P. Berrange
07a6b9aac4 Rename 'DeviceMonitor' to 'NodeDeviceDriver'
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Daniel P. Berrange
abe038cfc0 Extend previous check to validate driver struct field names
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Jiri Denemark
6d4804858e qemu: Use -machine accel=tcg|kvm when available
This is a better interface to choose accelerator than guessing whether
we should enable or disable kvm to get the right one.
2013-04-23 21:19:35 +02:00
Jiri Denemark
cfe24c1a18 qemu: Move -enable-kvm and friends earlier in the command line 2013-04-23 21:19:35 +02:00
Eric Blake
1bf25ba249 docs: fix usage of 'onto'
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.

* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-19 14:31:16 -06:00
Li Zhang
88c6159ca7 Set legacy USB option with default for ppc64.
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-19 11:30:49 +01:00
Osier Yang
9969ade669 syntax-check: Only allows to include public headers in external tools
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
2013-04-18 11:31:19 +08:00
Osier Yang
09d2547f96 qemu: Allow the disk wwn to have "0x" prefix
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.

qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'

Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
2013-04-17 23:05:56 +08:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
John Ferlan
c3ad5a3670 Resolve valgrind error
Commit id '1acfc171' resulted in the following valgrind failure:

==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317==    by 0x4C6F851: virAlloc (viralloc.c:124)
==25317==    by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317==    by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317==    by 0x402EF2: test8 (virbitmaptest.c:436)
==25317==    by 0x40499F: virtTestRun (testutils.c:157)
==25317==    by 0x402E8D: mymain (virbitmaptest.c:474)
==25317==    by 0x404FDA: virtTestMain (testutils.c:719)
==25317==    by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
2013-04-16 07:13:43 -04:00
Daniel P. Berrange
83336118db Track symlinks for co-mounted cgroup controllers
If a cgroup controller is co-mounted with another, eg

   /sys/fs/cgroup/cpu,cpuacct

Then it is a requirement that there exist symlinks at

   /sys/fs/cgroup/cpu
   /sys/fs/cgroup/cpuacct

pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
767596bdb4 Remove non-functional code for setting up non-root cgroups
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d4adf3efa Add XML config for resource partitions
Allow VMs to be placed into resource groups using the
following syntax

  <resource>
    <partition>/virtualmachines/production</partition>
  </resource>

A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
aa8604dd45 Add a new virCgroupNewPartition for setting up resource partitions
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d1c141a8d Refactor cgroups internal data structures
Currently the virCgroupPtr struct contains 3 pieces of
information

 - path - path of the cgroup, relative to current process'
   cgroup placement
 - placement - current process' placement in each controller
 - mounts - mount point of each controller

When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.

To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
d14524701a Add a test suite for cgroups functionality
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.

Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
b7f1d218d8 Conditionally compile storagevolxml2argvtest
Only compile storagevolxml2argvtest if WITH_STORAGE is
set, because it links to that driver

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
c78a2b13a6 Conditionalize use of symlink() function in test suite
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:30 +01:00
Stefan Berger
c772feb069 Add test case for TPM passthrough
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
2013-04-12 16:55:46 -04:00
Li Zhang
a6e37aedff Add USB option capability
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-12 10:56:03 +01:00
Bogdan Purcareata
442d6a0527 Implement support for <hostdev caps=net>
This allows a container-type domain to have exclusive access to one of
the host's NICs.

Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
2013-04-08 17:40:08 +01:00
Osier Yang
664270b849 Support seclabels for volume type disk
"seclabels" is only valid for 'file' or 'block' type storage volume.
2013-04-08 18:59:50 +08:00
Osier Yang
43404fee37 Support startupPolicy for 'volume' disk
"startupPolicy" is only valid for file type storage volume, otherwise
it fails on starting the domain.
2013-04-08 18:54:37 +08:00
Osier Yang
4bc331c894 Introduce new XMLs to specify disk source using libvirt storage
With this patch, one can specify the disk source using libvirt
storage like:

  <disk type='volume' device='disk'>
    <driver name='qemu' type='raw' cache='none'/>
    <source pool='default' volume='fc18.img'/>
    <target dev='vdb' bus='virtio'/>
  </disk>

"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.

docs/formatdomain.html.in:
  * Add documents for new XMLs
docs/schemas/domaincommon.rng:
  * Add rng for new XMLs;
src/conf/domain_conf.h:
  * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
  * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
  * New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
    type disk source.
  * New helper virDomainDiskSourcePoolDefFree to free the source def
    if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
  * New test
2013-04-08 18:48:14 +08:00
Osier Yang
9f781da69d New XML attributes for storage pool source adapter
This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test
2013-04-08 18:41:06 +08:00
Daniel P. Berrange
2d77704509 Avoid cast alignment warnings in port allocator test
To avoid

virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
     struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
                                 ^

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
15d8511b41 Add a test suite for keycode mapping functions
Validate that translations between different keycode sets
are functioning.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Osier Yang
1acfc171da util: Add a helper to check if all bits of a bitmap are clear 2013-04-06 10:14:21 +08:00
Osier Yang
d4bf0a9378 qemu: Support multiple queue virtio-scsi
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
2013-04-06 10:08:47 +08:00
Daniel P. Berrange
b1d3154a50 Ensure LD_PRELOAD exists before running test case
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:46 +01:00
Peter Krempa
482e5f159c virCaps: get rid of defaultConsoleTargetType callback
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
2013-04-04 22:42:39 +02:00
Peter Krempa
46becc18ba virCaps: get rid of macPrefix field
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
2013-04-04 22:42:38 +02:00
Peter Krempa
8960d65674 virCaps: get rid of hasWideScsiBus
Use the virDomainXMLConf structure to hold this data.
2013-04-04 22:42:38 +02:00
Peter Krempa
b299084988 virCaps: get rid of defaultDiskDriverType
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
2013-04-04 22:42:38 +02:00
Peter Krempa
b5def001cc virCaps: get rid of emulatorRequired
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.

This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
2013-04-04 22:42:38 +02:00
Peter Krempa
9ea249e7d9 virCaps: get rid of defaultDiskDriverName
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
2013-04-04 22:42:38 +02:00
Peter Krempa
a68d672667 qemu: Record the default NIC model in the domain XML
This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.

Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
2013-04-04 22:41:20 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
43b99fc4c0 conf: Add post XML parse callbacks and prepare for cleaning of virCaps
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.
2013-04-04 22:29:48 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Daniel P. Berrange
347081effa Implement minimal sysinfo for ARM platforms
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:31 +01:00
Daniel P. Berrange
0464ab183d Disable of unused sysinfotest functions
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.

sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
 sysinfotest_run(const char *test,

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00
Martin Kletzander
e7cd2844ca Allow multiple parameters for schedinfo
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:

virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0

Invalid scheduler options are reported as well.  These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
2013-04-03 08:49:30 +02:00
Peter Krempa
ab4bf20ead util: Change virMacAddrFormat to lowercase hex characters
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
2013-04-02 15:53:43 +02:00
Li Zhang
f84b92ea19 Optimize machine option to set more options with it
Currently, -machine option is used only when dump-guest-core is set.

To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-02 07:02:34 -06:00
Eric Blake
6f7e4ea359 smartcard: spell ccid-card-emulated qemu property correctly
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa

* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
2013-04-02 06:23:33 -06:00
Ján Tomko
f03dcc5df1 qemu: Allow migration over IPv6
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.

Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.

Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
2013-04-02 11:23:47 +02:00
Eric Blake
7524cd893e Revert "qemu: detect multi-head qxl via more than version check"
This reverts commit 5ac846e42e.

After further discussions with Alon Levy, I learned the following:

The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed.  Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device.  If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device.  If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens).  Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.

Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support.  Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.

Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it.  That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu.  Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
2013-03-25 08:38:35 -06:00
Michal Privoznik
70bc623b58 viralloc: Export virAllocTest*
If users build with --enable-test-oom configure option,
they get this error saying, virAllocTest* functions are
not defined within tests/testutils.c.
2013-03-22 12:45:14 +01:00
Paolo Bonzini
9f7a9aee37 qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:11:14 +08:00
Paolo Bonzini
523207fe8c qemu: pass iscsi authorization credentials
A better way to do this would be to use a configuration file like

   [iscsi "target-name"]
   user = name
   password = pwd

and pass it via -readconfig.  This would remove the username and password
from the "ps" output.  For now, however, keep this solution.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
6dca6d84ed domain: parse XML for iscsi authorization credentials
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
c820fbff9f qemu: support passthrough for iscsi disks
This enables usage of commands like persistent reservations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
1a308ee015 qemu: add support for libiscsi
libiscsi provides a userspace iSCSI initiator.

The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.

libiscsi uses "iscsi" as the scheme, not "iscsi+tcp".  We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:22 +08:00
Paolo Bonzini
1d94891288 domain: add support for iscsi network disks
This plumbs in the XML description of iSCSI shares.  The next patches
will add support for the libiscsi userspace initiator.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-20 17:30:25 -06:00
Olivia Yin
0b3509e245 qemu: add dtb option support
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
  <qemu:commandline>
    <qemu:arg value='-dtb'/>
    <qemu:arg value='/media/ram/test.dtb'/>
  </qemu:commandline>

This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
  <os>
    <type arch='ppc' machine='ppce500v2'>hvm</type>
    <kernel>/media/ram/uImage</kernel>
    <initrd>/media/ram/ramdisk</initrd>
    <dtb>/media/ram/test.dtb</dtb>
    <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
  </os>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-19 15:48:58 -06:00
Gene Czarcinski
1cd2078c88 rename tests/conftest.c
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
2013-03-19 13:13:28 -06:00
Daniel P. Berrange
3aabe27247 Define internal APIs for managing identities
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-19 13:37:37 +00:00
Paolo Bonzini
eebbb232e6 qemu: support URI syntax for NBD
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server.  Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.

The URI syntax also supports relative paths to Unix sockets.  These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.

The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:47:50 -06:00
Paolo Bonzini
be2a15dd60 qemu: support NBD with Unix sockets
This reuses the XML format that was introduced for Gluster.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:27:56 -06:00
Paolo Bonzini
0aa9f522c4 qemu: support named nbd exports
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:12:41 -06:00
Paolo Bonzini
b96e0c18e1 qemu: test NBD command-line builder and parser
Enable more testing of NBD parsing, to ensure rewrites work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 14:42:45 -06:00
Viktor Mihajlovski
53187afd81 S390: Testcases for virtio-scsi and virtio-rng
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 15:53:20 -06:00
Viktor Mihajlovski
6c92773256 qemu: Rename virtio-scsi capability
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 14:56:11 -06:00
Eric Blake
5ac846e42e qemu: detect multi-head qxl via more than version check
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2.  After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'.  I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).

* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
2013-03-14 09:38:20 -06:00
Daniel P. Berrange
1732c1c629 Fix parsing of SELinux ranges without a category
Normally libvirtd should run with a SELinux label

  system_u:system_r:virtd_t:s0-s0:c0.c1023

If a user manually runs libvirtd though, it is sometimes
possible to get into a situation where it is running

  system_u:system_r:init_t:s0

The SELinux security driver isn't expecting this and can't
parse the security label since it lacks the ':c0.c1023' part
causing it to complain

  internal error Cannot parse sensitivity level in s0

This updates the parser to cope with this, so if no category
is present, libvirtd will hardcode the equivalent of c0.c1023.

Now this won't work if SELinux is in Enforcing mode, but that's
not an issue, because the user can only get into this problem
if in Permissive mode. This means they can now start VMs in
Permissive mode without hitting that parsing error

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-14 12:42:21 +00:00
Peter Krempa
32bd699f55 virtio-rng: Add rate limiting options for virtio-RNG
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.

This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4

The rate limiting is exported in the XML as:
<devices>
  ...
  <rng model='virtio'>
    <rate bytes='123' period='1234'/>
    <backend model='random'/>
  </rng>
  ...
2013-03-14 13:28:10 +01:00
Viktor Mihajlovski
3eefaccd47 S390: Testcases for virtio-ccw machines
This adds and corrects testcases for virtio devices on s390
guests.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-13 18:21:50 -06:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Dusty Mabe
d3092c60f7 capabilities: add NUMA memory information
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:

    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>12572412</memory>
          <cpus num='12'>
          ...
        </cell>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-08 11:51:00 -07:00
Daniel P. Berrange
75e656a363 Fix crash parsing RNG device specification
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-07 12:57:10 +00:00
Eric Blake
4932ef4502 rng: restrict passthrough names to known-good files
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng.  It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.

[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023

* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
2013-03-04 17:45:38 -07:00
Daniel P. Berrange
0204d6d7a0 Fix TLS tests with gnutls 3
When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-04 17:42:16 +00:00
Laine Stump
db2536a627 Revert "Add support for <option> tag in network config"
This reverts commit 383ebc4694.

We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
2013-02-27 10:55:24 -05:00
Peter Krempa
2ab08e6cb1 tests: Test XML entities in source path for RNG device
Users may want to specify XML entities in paths to devices. Ensure they
are parsed and used properly.
2013-02-27 11:04:41 +01:00
Ján Tomko
ecc17eb46d tests: fix leaks in storagevolxml2argvtest
Reported by John Ferlan.
2013-02-27 10:11:52 +01:00
Eric Blake
9194679e10 tests: skip virstoragetest on RHEL 5
virstoragetest was failing on RHEL 5, but with no good error message:

TEST: virstoragetest
                                        0   FAIL

It turns out that qemu-img was so old, that it lacked support for
-o backing_file.  It didn't help that the test was also using
qemu-img from PATH, even after first probing for kvm-img.

* tests/virstoragetest.c (testPrepImages): Consistently use
discovered binary.  Skip instead of fail if qemu-img fails during
setup.
2013-02-26 12:53:36 -07:00
Eric Blake
b6176e5226 tests: old automake lacks abs_builddir
On RHEL 5, 'make check' included failures such as:

TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata

It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided.  We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.

This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).

* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.
2013-02-26 10:37:50 -07:00
Eric Blake
eb41338e25 tests: consistent skip messages
On RHEL 5, I noticed this test failure message:

TEST: qemumonitorjsontest
libvirt not compiled with yajl, skippingSKIP: qemumonitorjsontest

* tests/virstoragetest.c (testPrepImages): Use simpler fputs.
* tests/qemumonitorjsontest.c (mymain): Ensure trailing newline.
2013-02-26 10:06:25 -07:00
Eric Blake
dce95297e3 tests: uniformly report test failures
testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.
2013-02-25 17:38:11 -07:00
Eric Blake
f20b047691 tests: don't test json when not compiled in
Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.

* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.
2013-02-25 17:38:05 -07:00
Eric Blake
848a3b1d5b tests: avoid segfault if json monitor not present
On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine).  The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed.  I also noticed
that if I got the segfault, I was seeing messages such as:

2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor

which is also evidence of deferencing a stale pointer.  I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.

* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.
2013-02-25 17:37:14 -07:00
Peter Krempa
e8b70ab743 tests: Add tests for virtio-rng device handling
Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.
2013-02-25 10:58:04 +01:00
Gene Czarcinski
0b73a763f3 use client id for IPv6 DHCP host definition
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-25 02:49:06 -05:00
Ján Tomko
81738cd014 storage: move qemu-img options before positional arguments
Modify the expected output of storagevolxml2argv tests as well.
2013-02-24 18:11:40 +01:00
Ján Tomko
56e1b4c30f storage: add test for qemu-img command line generation 2013-02-24 18:11:40 +01:00
Pieter Hollants
383ebc4694 Add support for <option> tag in network config
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.

Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.

Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-22 19:45:19 -05:00
Daniel P. Berrange
7ea8c5d140 s/arm/armv7l/ in caps-qemu-kvm.xml
Fix the caps-qemu-kvm.xml test data file to refer to correct
arm arch name.
2013-02-22 15:49:51 +00:00
John Ferlan
11a1181260 commandtest: Resolve some coverity resource leaks 2013-02-16 07:44:35 -05:00
John Ferlan
e2f1fc5220 drivermodule: Ignore coverity warning about leaked_storage 2013-02-16 07:44:34 -05:00
Eric Blake
a18452d0d2 storage: test backing chain traversal
Testing our backing chain handling will make it much easier to
ensure that we avoid issues in the future.  If only I had written
this test before I first caused several regressions...

* tests/virstoragetest.c: New test.
* tests/Makefile.am (test_programs): Build it.
* .gitignore: Ignore new files.
2013-02-15 16:07:01 -07:00
Eric Blake
ec8a2d0327 regex: gnulib guarantees that we have regex support
No need to use HAVE_REGEX_H - our use of gnulib guarantees that
the header exists and works, regardless of platform.  Similarly,
we can unconditionally assume a compiling <sys/wait.h> (although
the mingw version of this header is not full-featured).

* src/storage/storage_backend.c: Drop useless conditional.
* tests/testutils.c: Likewise.
2013-02-15 13:01:23 -07:00
Eric Blake
c6f1060ca7 util: add virendian.h macros
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.

The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed.  Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later.  But for now, a macro worked.

* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
2013-02-12 09:00:15 -07:00
Eric Blake
ca7cc85245 build: fix VPATH testsuite
'make check' has been failing on VPATH builds since commit
907a39e7.  The tests already had magic for munging path names,
but were munging to the wrong location, thus working only on
an in-tree build.

* tests/securityselinuxlabeltest.c (testSELinuxMungePath): Munge
to correct path.
2013-02-11 15:59:42 -07:00
Daniel P. Berrange
11d926659b Turn virSecurityManager into a virObjectLockable
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-11 12:33:41 +00:00
Daniel P. Berrange
32803ba409 Rename 'qemuCapsXXX' to 'virQEMUCapsXXX'
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:49:14 +00:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
Daniel P. Berrange
9cceb0fc35 Fix PKI directory used for QEMU test suite
The data files for testing QEMU command line generation are
hardcoded to use /etc/pki, so we should explicitly set that
in the test case, avoiding the dynamic SYSCONFDIR value.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:25 +00:00
John Ferlan
1d8b4f0592 valgrind: Adjust the suppression file 2013-02-07 14:08:14 -05:00
John Ferlan
9442d03c48 qemumonitortestutils: Resolve resource leaks found by Valgrind
When Valgrind runs the 'qemumonitorjsontest' it would claim that the
thread created is leaked. That's because the virThreadJoin won't get
called due to the 'running' flag being cleared.  In order to avoid that,
call virThreadJoin unconditionally at cleanup time.  Also noted that the
qemuMonitorTestWorker() didn't get the test mutex lock on the failure path.

The incoming and outgoing buffers allocated by qemuMonitorTestIO() and
qemuMonitorTestAddReponse() were never VIR_FREE()'d in qemuMonitorTestFree().
2013-02-07 14:08:14 -05:00
John Ferlan
3f5250ff8e qemumonitorjsontest: Resolve resource leaks found by Valgrind
The 'package' string returned by qemuMonitorGetVersion() needs to
be VIR_FREE()'d.

testQemuMonitorJSONGetMachines(), testQemuMonitorJSONGetCPUDefinitions(),
and testQemuMonitorJSONGetCommands() did not VIR_FREE() the array and
array elements allocated by their respective qemuMonitorGet* routines.
2013-02-07 14:08:14 -05:00
John Ferlan
785d6bc58a qemuxml2argvtest: Resolve resource leaks found by Valgrind
Valgrind deterimined that fakeSecretGetValue() was using the secret
value without checking validity.  Returning NULL causes the caller
to emit a message and results in failure.

Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
2013-02-07 14:08:14 -05:00
John Ferlan
0eb62708a7 virnettlscontexttest: Resolve memory leak found by Valgrind
testTLSDerEncode() will allocate memory for der.data, it wasn't VIR_FREE()'d.
also don't initialized der to use static buffer.
2013-02-07 14:08:13 -05:00
Eric Blake
98fc0137f1 bitmap: add way to find next clear bit
We had an easy way to iterate set bits, but not for iterating
cleared bits.

* src/util/virbitmap.h (virBitmapNextClearBit): New prototype.
* src/util/virbitmap.c (virBitmapNextClearBit): Implement it.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test4): Test it.
2013-02-05 16:23:14 -07:00
Eric Blake
3a9382ca2a tests: reserve more fds for commandtest
Commit 39c77fe triggered random failures, depending on the platform
and what other fds leak into the testsuite (for me, it passed on
RHEL 6 but failed on Fedora 18).  The reason was that we were
expecting an fd that fell outside of our reserved range.  By reserving
a larger range, the test once again passes on all platforms.

* tests/commandtest.c (mymain): Reserve enough fds.
2013-02-05 10:47:00 -07:00
Daniel P. Berrange
b090aa7d55 Introduce a virQEMUDriverConfigPtr object
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-05 15:49:25 +00:00
Michal Privoznik
f0154959b3 tests: Create test for virCommandDoAsyncIO
This is just a basic test, so we don't break virCommand in the
future. A "Hello world\n" string is written to commanhelper,
which copies input to stdout and stderr where we read it from.
Then the read strings are compared with expected values.
2013-02-05 15:45:21 +01:00
Michal Privoznik
39c77fe586 Introduce event loop to commandtest
This is just preparing environment for the next patch, which is
going to need an event loop.
2013-02-05 15:45:21 +01:00
Eric Blake
949ebc3022 tests: add a comment about our fake qmp
While testing QMP, I used a simple qemu session of
'qemu-kvm -M none -nodefaults -nographic -qmp stdio'
for some experiments.  But it took me far too long to remember
the magic invocation to unlock QMP into accepting normal commands.
While I was able to grep libvirt sources and easily find where
libvirt expects the normal "QMP" greeting, I could not find the
proper reply to that greeting nearby.

Reading the testsuite didn't help either, since there we don't
emulate the mandatory handshake.  But since my grep hit the
testsuite, adding a bit of documentation will make it much easier
to jog my memory in the future.

* tests/qemumonitortestutils.c (QEMU_JSON_GREETING): Mention that
the normal counterpart reply is skipped.
2013-01-31 10:15:33 -07:00
Jiri Denemark
d6c8597046 tests: Don't build securityselinuxlabeltest without qemu
Sources for securityselinuxlabeltest are only defined if qemu driver is
enabled so we should not try to build the test if qemu driver is
disabled.
2013-01-31 10:32:43 +01:00
John Ferlan
46b1d8cf7a Enforce return check on virAsprintf() calls
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors.  In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).

It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:

https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html

This patch does that and fixes a few more instances not found by Coverity
that failed the check.
2013-01-30 14:42:22 -07:00
Josh Durgin
c1509ab47e qemu: escape ipv6 for rbd network disk hosts
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.

Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-01-25 11:48:24 +08:00
John Ferlan
9ff3876cc8 virbitmaptest: Resolve Coverity errors
test1: Need to check for bitmap before using as well as free it properly
test2: need to check for bitsString2 before using it.
2013-01-23 15:02:06 +01:00
John Ferlan
31e0de1a85 tests: Remove VIR_FREE() on static/stack buffer (der.data) 2013-01-23 15:02:06 +01:00
Alon Levy
55bfd020d8 qemu: Support ram bar size for qxl devices
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".

<video>
  <model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>

That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.

The resulting qemu command line change is the addition of

-global qxl-vga.ram_size=<ram>*1024

or

-global qxl.ram_size=<ram>*1024

For the main and secondary qxl devices respectively.

The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
2013-01-22 10:40:45 -07:00
John Ferlan
35c30522a5 tests: Need to initialize 'test' properly on error path
In the error path, the test buffer is free'd, but due to how the free
routine is written the 'test' buffer pointer does not return to the caller
as NULL and then the free'd buffer address is returned to the caller.
2013-01-22 17:29:26 +01:00
John Ferlan
3e8502165f commandtest: Need to initialize 'errbuf'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
John Ferlan
ff4eac595f virnetsockettest: Need to initialize 'path'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
Eric Blake
f403bdc189 build: fix build on BSD
A build on FreeBSD failed with:
util/virportallocator.c:108: error: storage size of 'addr' isn't known
util/virportallocator.c:123: error: 'INADDR_ANY' undeclared (first use in this function)

It turns out that while POSIX allows sockaddr_in to leak in through
<arpa/inet.h> (the way Linux does it), it is not mandatory, and
conforming applications are required to get it through <netinet/in.h>.

* src/util/virportallocator.c: Include header for struct
sockaddr_in.
* tests/virportallocatortest.c: Likewise.
2013-01-17 16:39:10 -07:00
Daniel P. Berrange
da5a8aee2b Avoid integer wrap on remotePortMax in QEMU driver
The QEMU driver default max port is 65535, but it then increments
this by 1 to 65536. This maps to 0 in an unsigned short :-( This
was apparently done so that for() loops could use "< max" instead
of "<= max". Remove this insanity and just make the loop do the
right thing.
2013-01-17 13:52:33 +00:00
Daniel P. Berrange
9c9d4d32d3 Add a port allocator class
Introduce a virPortAllocator for managing TCP port allocations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
Daniel P. Berrange
325b02b5a3 Convert virDomainObj, qemuAgent, qemuMonitor, lxcMonitor to virObjectLockable
The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
John Ferlan
7ae3f2d53d securityselinuxhelper.c: Don't try to include xattr.h if not available
Commit 907a39e7 missed adding the WITH_ATTR around #include <attr/xattr.h>
resulting in a build failure:

  CC     libsecurityselinuxhelper_la-securityselinuxhelper.lo
  securityselinuxhelper.c:27:24: fatal error: attr/xattr.h: No such file or directory
  compilation terminated.
  make[2]: *** [libsecurityselinuxhelper_la-securityselinuxhelper.lo] Error 1
  make[2]: Leaving directory `/home/jferlan/libvirt.work/tests'
  make[1]: *** [all-recursive] Error 1
  make[1]: Leaving directory `/home/jferlan/libvirt.work'
  make: *** [all] Error 2
2013-01-14 21:00:51 +01:00
Daniel P. Berrange
7184af1364 Add missing stubs to securityselinuxhelper.c
Make sure we override both the raw and non-raw stubs in
securityselinuxhelper.c. Also add diagnostics if
securityselinuxlabeltest fails a test item
2013-01-14 18:34:49 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
bccd4a8cbc Rename HAVE_GNUTLS to WITH_GNUTLS 2013-01-14 13:26:47 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
49a1c16027 Convert HAVE_YAJL into WITH_YAJL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:22 +00:00
Guannan Ren
fc66c1603c qemu: add usb-net caps flag
QEMU_CAPS_DEVICE_USB_NET /* -device usb-net */
2013-01-10 21:56:31 +08:00
Guannan Ren
f8d478b6df qemu: add usb-serial caps flag
QEMU_CAPS_DEVICE_USB_SERIAL /* -device usb-serial */
2013-01-10 21:26:50 +08:00
John Ferlan
5a4af2a7d6 tests: Remove remnants of removing the fake emulator output
Coverity determined that 'emulator' could no longer be set and determined the
code was dead.  Looking through the history, I discovered commit-id ed769e18
removed code originally added by commit-id 9237e955 and further modified by
commit-id 6a7e7c4f.
2013-01-08 17:19:32 -07:00
Daniel P. Berrange
f587c27768 Make TLS support conditional
Add checks for existence of GNUTLS and automatically disable
it if not found.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 20:57:31 +00:00
John Ferlan
51811e4161 Resolve COPY_PASTE error found by Coverity
Fix copy-paste error doing handshake.

The clientShake was not set to true, thus we'd potentially never leave
the handshake while loop.
2013-01-08 16:21:46 +01:00
J.B. Joret
db2b6861dc S390: Enable SCLP Console in QEMU driver
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.

Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-08 11:37:52 +01:00
Osier Yang
535aed56a2 conf: Parse and format the new XML
Like "rawio", "sgio" is only allowed for block disk of device
type "lun".

It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".
2013-01-07 21:38:43 +08:00
John Ferlan
7ac12d84d0 tests: check and handle error for virAsprintf() calls 2013-01-04 10:57:20 -07:00
John Ferlan
0c6e95fe78 Check return on mkdir for LOCKSPACE_DIR 2013-01-04 10:57:09 -07:00
Daniel P. Berrange
f24404a324 Rename virterror.c virterror_internal.h to virerror.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
556cf5f617 Rename xml.{c,h} to virxml.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
44f6ae27fe Rename util.{c,h} to virutil.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
404174cad3 Rename threads.{c,h} to virthread.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
88ba722c12 Rename sysinfo.{c,h} to virsysinfo.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
fde9df8dcc Rename stats_linux.{c,h} to virstatslinux.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
936d95d347 Rename logging.{c,h} to virlog.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
6a095d0851 Rename json.{c,h} to virjson.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
4d6050a8eb Rename event_poll.{c,h} to vireventpoll.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
4857b9c3a9 Rename event.{c,h} to virevent.{c,h}
Since the event APIs are now in the public header, no internal
code should include virevent.h
2012-12-21 11:17:13 +00:00
Daniel P. Berrange
0f8454101d Rename conf.{c,h} to virconf.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
04d9510f50 Rename command.{c,h} to vircommand.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
2005f7b552 Rename buf.{c,h} to virbuffer.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Daniel P. Berrange
a27e4fbb72 Rename bitmap.{c,h} to virbitmap.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Li Zhang
99c5545693 Add sysinfo data and enable virSysinfoRead test case for POWER
This patch is to enable virSysinfoRead test case for POWER,
and provide sysinfo data on POWER.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-12-20 14:49:20 -07:00
Daniel P. Berrange
32df483f1d Fix SELinux security label test
If securityselinuxtest was run on a system with newer SELinux
policy it would fail, due to using svirt_tcg_t instead of
svirt_t. Fixing the domain type to be KVM avoids this issue.
2012-12-19 10:05:17 +00:00
Daniel P. Berrange
392c192240 Fix test cases for virArch changes 2012-12-18 19:32:23 +00:00
Daniel P. Berrange
aae0fc2a92 Add support for <hostdev mode="capabilities">
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.

The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.

    <hostdev mode='capabilities' type='storage'>
      <source>
        <block>/dev/sdf1</block>
      </source>
    </hostdev>

The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.

    <hostdev mode='capabilities' type='misc'>
      <source>
        <char>/dev/input/event3</char>
      </source>
    </hostdev>

The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-17 17:50:50 +00:00
Viktor Mihajlovski
347a712ab1 tests: Add tests for sysinfo
Test cases for virSysinfoRead. Initially, there are tests for
x86 (DMI based) and s390 (/proc/... based).
In lack of PPC data, I have stubbed out the test for it, but it
can be added with a minimal effort.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-12-17 17:37:17 +00:00
Guannan Ren
ed6fc41b9c tests: add one -device video device testcase
The testcase is for testing non-fixed PCI address for primary
video device and using video args to -deivce qemu option.
2012-12-17 14:02:58 +08:00
Guannan Ren
aa51202b72 qemu: use newer -device video device in qemu commandline
'-device VGA' maps to '-vga std'
'-device cirrus-vga' maps to '-vga cirrus'
'-device qxl-vga' maps to '-vga qxl'
             (there is also '-device qxl' for secondary devices)
'-device vmware-svga' maps to '-vga vmware'

For qemu(>=1.2), we can use -device to replace -vga for video
device. For the primary video device, the patch tries to use 0x2
slot for matching old qemu. If the 0x2 slot is allocated already,
the addr property could help for using any available slot.
For qemu(< 1.2), we keep using -vga for primary device.
2012-12-17 14:02:50 +08:00
Guannan Ren
4c993d8ab5 qemu: add qemu vga devices caps and one cap to mark them usable
QEMU_CAPS_DEVICE_QXL          -device qxl
QEMU_CAPS_DEVICE_VGA          -device VGA
QEMU_CAPS_DEVICE_CIRRUS_VGA   -device cirrus-vga
QEMU_CAPS_DEVICE_VMWARE_SVGA  -device vmware-svga

QEMU_CAPS_DEVICE_VIDEO_PRIMARY  /* safe to use -device XXX
                                 for primary video device */

Fix a typo in qemuCapsObjectTypes, the string 'qxl' here
should be -device qxl rather than -vga [...|qxl|..]
2012-12-17 13:55:50 +08:00
Laine Stump
d66eb78667 network: prevent dnsmasq from listening on localhost
This patch resolves the problem reported in:

   https://bugzilla.redhat.com/show_bug.cgi?id=886663

The source of the problem was the fix for CVE 2011-3411:

   https://bugzilla.redhat.com/show_bug.cgi?id=833033

which was originally committed upstream in commit
753ff83a50. That commit improperly
removed the "--except-interface lo" from dnsmasq commandlines when
--bind-dynamic was used (based on comments in the latter bug).

It turns out that the problem reported in the CVE could be eliminated
without removing "--except-interface lo", and removing it actually
caused each instance of dnsmasq to listen on localhost on port 53,
which created a new problem:

If another instance of dnsmasq using "bind-interfaces" (instead of
"bind-dynamic") had already been started (or if another instance
started later used "bind-dynamic"), this wouldn't have any immediately
visible ill effects, but if you tried to start another dnsmasq
instance using "bind-interfaces" *after* starting any libvirt
networks, the new dnsmasq would fail to start, because there was
already another process listening on port 53.

(Subsequent to the CVE fix, another patch changed the network driver
to put dnsmasq options in a conf file rather than directly on the
dnsmasq commandline, but preserved the same options.)

This patch changes the network driver to *always* add
"except-interface=lo" to dnsmasq conf files, regardless of whether we use
bind-dynamic or bind-interfaces. This way no libvirt dnsmasq instances
are listening on localhost (and the CVE is still fixed).

The actual code change is miniscule, but must be propogated through all
of the test files as well.
2012-12-13 12:15:03 -05:00
Eric Blake
7339bc4ced network: match xml warning message
I noticed that /var/lib/libvirt/dnsmasq/*.conf used the wrong word;
it was intended to match the wording in src/util/xml.c.

* src/network/bridge_driver.c (networkDnsmasqConfContents): Fix typo.
* tests/networkxml2confdata/*.conf: Update accordingly.
2012-12-12 15:12:58 -07:00
Serge Hallyn
a4e44e674e add vnc unix sockets to apparmor policy
When using vnc gaphics over a unix socket, virt-aa-helper needs to provide
access for the qemu domain to access the sockfile.

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2012-12-11 14:32:39 -07:00
Serge Hallyn
88bd1a644b add security hook for permitting hugetlbfs access
When a qemu domain is backed by huge pages, apparmor needs to grant the domain
rw access to files under the hugetlbfs mount point.  Add a hook, called in
qemu_process.c, which ends up adding the read-write access through
virt-aa-helper.  Qemu will be creating a randomly named file under the
mountpoint and unlinking it as soon as it has mmap()d it, therefore we
cannot predict the full pathname, but for the same reason it is generally
safe to provide access to $path/**.

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2012-12-11 14:27:20 -07:00
Gene Czarcinski
8b32c80df0 network: put dnsmasq parameters in conf-file instead of command line
This patch changes how parameters are passed to dnsmasq.  Instead of
being on the command line, the parameters are put into a file (one
parameter per line) and a commandline --conf-file= specifies the
location of the file.  The file is located in the same directory as
the leases file.

Putting the dnsmasq parameters into a configuration file
allows them to be examined and more easily understood than
examining the command lines displayed by "ps ax".  This is
especially true when a number of networks have been started.

When the use of dnsmasq was originally done, the required command line
was simple, but it has gotten more complicated over time and will
likely become even more complicated in the future.

Note: The test conf files have all been renamed .conf instead of
.argv, and tests/networkxml2xmlargvdata was moved to
tests/networkxml2xmlconfdata.
2012-12-11 05:49:45 -05:00
Gene Czarcinski
2d5cd1d724 network: add support for DHCPv6
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface.  This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.

Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.

With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)

Documentation and the network schema has been updated
to reflect the new support.
2012-12-11 05:49:45 -05:00
Osier Yang
b718ded39a qemu: Allow the user to specify vendor and product for disk
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
2012-12-07 16:53:27 +08:00
Gene Czarcinski
705e67d40b network: allow guest to guest IPv6 without gateway definition
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified.  This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).

This patch adds a new attribute "ipv6" at the toplevel of a <network>
object.  If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.

Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:

   net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1

This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.

To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.

Documentation related to this patch has been updated.
The network schema has also been updated.
2012-12-05 14:58:32 -05:00
Daniel P. Berrange
76c1fd33c8 Introduce APIs for splitting/joining strings
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **

There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 20:05:43 +00:00
Laine Stump
753ff83a50 network: use dnsmasq --bind-dynamic when available
This bug resolves CVE-2012-3411, which is described in the following
bugzilla report:

  https://bugzilla.redhat.com/show_bug.cgi?id=833033

The following report is specifically for libvirt on Fedora:

  https://bugzilla.redhat.com/show_bug.cgi?id=874702

In short, a dnsmasq instance run with the intention of listening for
DHCP/DNS requests only on a libvirt virtual network (which is
constructed using a Linux host bridge) would also answer queries sent
from outside the virtualization host.

This patch takes advantage of a new dnsmasq option "--bind-dynamic",
which will cause the listening socket to be setup such that it will
only receive those requests that actually come in via the bridge
interface. In order for this behavior to actually occur, not only must
"--bind-interfaces" be replaced with "--bind-dynamic", but also all
"--listen-address" options must be replaced with a single
"--interface" option. Fully:

   --bind-interfaces --except-interface lo --listen-address x.x.x.x ...

(with --listen-address possibly repeated) is replaced with:

   --bind-dynamic --interface virbrX

Of course libvirt can't use this new option if the host's dnsmasq
doesn't have it, but we still want libvirt to function (because the
great majority of libvirt installations, which only have mode='nat'
networks using RFC1918 private address ranges (e.g. 192.168.122.0/24),
are immune to this vulnerability from anywhere beyond the local subnet
of the host), so we use the new dnsmasqCaps API to check if dnsmasq
supports the new option and, if not, we use the "old" option style
instead. In order to assure that this permissiveness doesn't lead to a
vulnerable system, we do check for non-private addresses in this case,
and refuse to start the network if both a) we are using the old-style
options, and b) the network has a publicly routable IP
address. Hopefully this will provide the proper balance of not being
disruptive to those not practically affected, and making sure that
those who *are* affected get their dnsmasq upgraded.

(--bind-dynamic was added to dnsmasq in upstream commit
54dd393f3938fc0c19088fbd319b95e37d81a2b0, which was included in
dnsmasq-2.63)
2012-11-29 15:02:39 -05:00
Laine Stump
719c2c7665 util: capabilities detection for dnsmasq
In order to optionally take advantage of new features in dnsmasq when
the host's version of dnsmasq supports them, but still be able to run
on hosts that don't support the new features, we need to be able to
detect the version of dnsmasq running on the host, and possibly
determine from the help output what options are in this dnsmasq.

This patch implements a greatly simplified version of the capabilities
code we already have for qemu. A dnsmasqCaps device can be created and
populated either from running a program on disk, reading a file with
the concatenated output of "dnsmasq --version; dnsmasq --help", or
examining a buffer in memory that contains the concatenated output of
those two commands. Simple functions to retrieve capabilities flags,
the version number, and the path of the binary are also included.

bridge_driver.c creates a single dnsmasqCaps object at driver startup,
and disposes of it at driver shutdown. Any time it must be used, the
dnsmasqCapsRefresh method is called - it checks the mtime of the
binary, and re-runs the checks if the binary has changed.

networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at
startup - one "restricted" (doesn't support --bind-dynamic) and one
"full" (does support --bind-dynamic). Some of the test cases use one
and some the other, to make sure both code pathes are tested.
2012-11-29 15:02:39 -05:00
Daniel P. Berrange
4738c2a7e7 Replace 'struct qemud_driver *' with virQEMUDriverPtr
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
2012-11-28 18:17:25 +00:00
Guannan Ren
237629d204 bitmap: fix typo to use UL type of integer constant in virBitmapIsAllSet
This bug leads to getting incorrect vcpupin information via
qemudDomainGetVcpuPinInfo() API when the number of maximum
cpu on a host falls into a range such as 31 < ncpus < 64.

gcc warning:
left shift count >= width of type

The following bug is such the case
https://bugzilla.redhat.com/show_bug.cgi?id=876415
2012-11-28 18:30:28 +08:00
Harsh Prateek Bora
f97a569944 tests: Add tests for gluster protocol based network disks support
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
2012-11-27 10:19:22 +01:00
Ján Tomko
5efacd7813 build: fix build --without-network
bridge_driver.h: silence gcc warnings:
statement with no effect [-Wunused-value]
unused variable 'net' [-Wunused-variable]

virdrivermoduletest.c: don't require network driver module
if it hasn't been built.
2012-11-26 14:01:23 +01:00
Michal Privoznik
a154f5f313 qemuhelpdata: Revert my 'fix'
I was convicted that space at EOL should no be there
even for qemu help data. Hence, I've removed one in
commit bb2f621611. However, it turns out we want
it exactly the way qemu produces it. So I should undo
my premature fix. A patch against qemu has been posted
as well.
2012-11-23 09:25:20 +01:00
Ján Tomko
bb2f621611 tests: update qemuhelptest data
Both generated with
qemu-system-x86_64 --help > qemu-1.2.0

qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? \
-device PIIX4_PM,? \
-device usb-redir,? \
-device ide-drive,? \
-device usb-host,? 2> qemu-1.2.0-device

It seems I missed a few -device flags when doing this last time and I
mixed up qemu and qemu-kvm.
2012-11-21 18:43:18 +01:00
Ján Tomko
c5834ec148 tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
Miloslav Trmač
37f7a1faf1 Add metadata to virLogOutputFunc
... and update all users.  No change in functionality, the parameter
will be used in the next patch.

Signed-off-by: Miloslav Trmač <mitr@redhat.com>
2012-11-14 19:14:07 -07:00
Peter Krempa
e5aab47ab3 tests: Remove temporary directories in qemumonitorjsontest
qemumonitorjsontest creates a temporary directory to hold the socket
that is simulating the monitor socket. The directory containing the
socket wasn't disposed properly at the end of the test leaving garbage
in the temporary folder.
2012-11-13 09:32:15 +01:00
Peter Krempa
e25a32f3da tests: Fix qemumonitorjsontest deadlock when the machine is under load
When doing the qemumonitorjsontest on a machine under heavy load the
test tends to deadlock from time to time. This patch adds the hack to
break the event loop that is used in virsh.
2012-11-13 09:32:14 +01:00
Peter Krempa
7a791677b0 nodeinfotest: Add test data from a AMD bulldozer machine.
The AMD Bulldozer architecture uses so called "Clustered integer core
modules" that count both as threads and cores. This patch expects the
cpu to be detected using the new fallback condition otherwise twice the
number of processors would be detected.
2012-11-13 00:35:36 +01:00
Peter Krempa
86748976f1 nodeinfotest: Add test data for 2 processor host with broken NUMA
This test data was gathered on an AMD MagnyCours machine that reports it
has only one NUMA node although the hardware is consisting of 4. As
duplicate core id's are ignored the reported topology was bogous. This
should be fixed by the previous patch.

Reported and data provided by George-Cristian Bîrzan.
2012-11-13 00:35:36 +01:00
Viktor Mihajlovski
b1c88c1476 capabilities: defaultConsoleTargetType can depend on architecture
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.

Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.

Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.

N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-11-09 09:20:59 -07:00
Eric Blake
2cd4d8e506 virsh: add snapshot-create-as memspec support
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name.  This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external.  For an example,

virsh snapshot-create-as $dom --memspec /path/to/file

is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.

* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
2012-11-07 09:04:18 -07:00
Michal Privoznik
a95c9406a2 tests: Add test for controller order 2012-11-06 10:11:35 +01:00
Eric Blake
4201a7ea1c snapshot: new XML for external system checkpoint
Each <domainsnapshot> can now contain an optional <memory>
element that describes how the VM state was handled, similar
to disk snapshots.  The new element will always appear in
output; for back-compat, an input that lacks the element will
assume 'no' or 'internal' according to the domain state.

Along with this change, it is now possible to pass <disks> in
the XML for an offline snapshot; this also needs to be wired up
in a future patch, to make it possible to choose internal vs.
external on a per-disk basis for each disk in an offline domain.
At that point, using the --disk-only flag for an offline domain
will be able to work.

For some examples below, remember that qemu supports the
following snapshot actions:

qemu-img: offline external and internal disk
savevm: online internal VM and disk
migrate: online external VM
transaction: online external disk

=====
<domainsnapshot>
  <memory snapshot='no'/>
  ...
</domainsnapshot>

implies that there is no VM state saved (mandatory for
offline and disk-only snapshots, not possible otherwise);
using qemu-img for offline domains and transaction for online.

=====
<domainsnapshot>
  <memory snapshot='internal'/>
  ...
</domainsnapshot>

state is saved inside one of the disks (as in qemu's 'savevm'
system checkpoint implementation).  If needed in the future,
we can also add an attribute pointing out _which_ disk saved
the internal state; maybe disk='vda'.

=====
<domainsnapshot>
  <memory snapshot='external' file='/path/to/state'/>
  ...
</domainsnapshot>

This is not wired up yet, but future patches will allow this to
control a combination of 'virsh save /path/to/state' plus disk
snapshots from the same point in time.

=====

So for 1.0.1 (and later, as needed), I plan to implement this table
of combinations, with '*' designating new code and '+' designating
existing code reached through new combinations of xml and/or the
existing DISK_ONLY flag:

domain  memory  disk   disk-only | result
-----------------------------------------
offline omit    omit   any       | memory=no disk=int, via qemu-img
offline no      omit   any       |+memory=no disk=int, via qemu-img
offline omit/no no     any       | invalid combination (nothing to snapshot)
offline omit/no int    any       |+memory=no disk=int, via qemu-img
offline omit/no ext    any       |*memory=no disk=ext, via qemu-img
offline int/ext any    any       | invalid combination (no memory to save)
online  omit    omit   off       | memory=int disk=int, via savevm
online  omit    omit   on        | memory=no disk=default, via transaction
online  omit    no/ext off       | unsupported for now
online  omit    no     on        | invalid combination (nothing to snapshot)
online  omit    ext    on        | memory=no disk=ext, via transaction
online  omit    int    off       |+memory=int disk=int, via savevm
online  omit    int    on        | unsupported for now
online  no      omit   any       |+memory=no disk=default, via transaction
online  no      no     any       | invalid combination (nothing to snapshot)
online  no      int    any       | unsupported for now
online  no      ext    any       |+memory=no disk=ext, via transaction
online  int/ext any    on        | invalid combination (disk-only vs. memory)
online  int     omit   off       |+memory=int disk=int, via savevm
online  int     no/ext off       | unsupported for now
online  int     int    off       |+memory=int disk=int, via savevm
online  ext     omit   off       |*memory=ext disk=default, via migrate+trans
online  ext     no     off       |+memory=ext disk=no, via migrate
online  ext     int    off       | unsupported for now
online  ext     ext    off       |*memory=ext disk=ext, via migrate+transaction

* docs/schemas/domainsnapshot.rng (memory): New RNG element.
* docs/formatsnapshot.html.in: Document it.
* src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields.
* src/conf/domain_conf.c (virDomainSnapshotDefFree)
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Manage new fields.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/domainsnapshotxml2xmlin/*.xml: Update existing tests.
* tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-11-02 09:56:23 -06:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Guido Günther
0e7fd31fb5 Create temporary dir for socket
to avoid ENAMETOOLONG:

https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=amd64&ver=1.0.0~rc1-1&stamp=1351453521
2012-10-30 19:16:57 +01:00
Peter Krempa
f88b076d17 nodeinfotest: Delete NUL bytes from test data
The test data contained extra \0 bytes after newlines probably due to a
kernel off-by-one bug.
2012-10-30 10:39:06 +01:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Eric Blake
0711c4b74d bitmap: add virBitmapCountBits
Sometimes it's handy to know how many bits are set.

* src/util/bitmap.h (virBitmapCountBits): New prototype.
(virBitmapNextSetBit): Use correct type.
* src/util/bitmap.c (virBitmapNextSetBit): Likewise.
(virBitmapSetAll): Maintain invariant of clear tail bits.
(virBitmapCountBits): New function.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test2): Test it.
2012-10-25 11:19:23 -06:00
Doug Goldstein
2da776b1d6 qemu: Don't blindly assume VNC is supported
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
2012-10-22 23:16:17 +08:00
Doug Goldstein
8be88034bf test: Don't assume VNC is always available
Several tests assume that VNC is always available and include it in
their configs and the expected command line. The tests have nothing to
do with graphics display so they shouldn't rely on VNC.
2012-10-22 23:16:11 +08:00
Laine Stump
1cb1f9dabf network: always create dnsmasq hosts and addnhosts files, even if empty
This fixes the problem reported in:

  https://bugzilla.redhat.com/show_bug.cgi?id=868389

Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.

The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)

The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.
2012-10-20 21:29:19 -04:00
Eric Blake
41e0edaf84 storage: treat 'aio' like 'raw' at parse time
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name.  This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.

* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
2012-10-19 17:35:09 -06:00
Peter Krempa
09f10a12be qemu: Add support for HyperV Enlightenment feature "relaxed"
This patch adds QEMU support for the "relaxed" feature implemented by
previous patch.
2012-10-18 12:22:50 +02:00
Daniel P. Berrange
eca72d4759 Introduce an internal API for handling file based lockspaces
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence

  threadA: fd1 = open("foo")
  threadB: fd2 = open("foo")
  threadA: virFileLock(fd1)
  threadB: virFileLock(fd2)
  threadB: close(fd2)

you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.

To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace".  This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.

NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.

eg to lock /var/lib/libvirt/images/foo.img the application
might do

   virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
   lockname = md5sum("/var/lib/libvirt/images/foo.img");
   virLockSpaceAcquireLock(lockspace, lockname);

NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.

It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg

   virLockSpacePtr lockspace = virLockSpaceNew(NULL);
   virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");

This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-10-16 15:45:55 +01:00
Martin Kletzander
59952932f5 conf: add test for boot dev and order
Add test for 280b8c9e7c.
2012-10-16 12:25:32 +02:00
Martin Kletzander
9674f2c637 selinux: Use raw contexts
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code.  This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.

The problems can be experienced with mcstrans for example.  The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.

I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.

Thanks Laurent Bigonville for finding this out.

[1] http://oss.tresys.com/git/selinux.git
2012-10-12 17:54:09 +02:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
844cdf22e6 qemu: Fix QMP detection of QXL graphics
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
2012-10-09 11:42:05 +02:00
Martin Kletzander
5d692cc714 fix kvm_pv_eoi with kvmclock
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
2012-10-08 20:13:55 +02:00
Daniel P. Berrange
b073fe40db Refactor qemuCapsParseDeviceStr to work from data tables
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.

Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 11:25:49 +01:00
Daniel P. Berrange
e8fd8757c8 Change logging category parameter into an enum
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:39:28 +01:00
Daniel P. Berrange
0225c566f4 Include filename explicitly in logging APIs
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:34:14 +01:00
Daniel P. Berrange
4764a6c5a3 s/int/virLogDestination/ in logging code
The log destinations are an enum, but most of the code was
just using a plain 'int' for function params / variables.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:22:13 +01:00
Daniel P. Berrange
2dd77cd1ff s/long long/size_t/ for file line numbers in logging code
The __LINE__ macro value is specified to fit in the size_t
type, so use that instead of 'long long' in the logging code

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:17:02 +01:00
Daniel P. Berrange
de29867e22 s/int/virLogPriority/ in logging code
The log priority levels are an enum, but most of the code was
just using a plain 'int' for function params / variables.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:10:47 +01:00
Miloslav Trmač
a5fa3322c8 Pass the "raw" log message to each virLogOutputFunc
In addition to the preformatted text line, pass the raw message as well,
to allow the output functions to use a different output format.

Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 12:46:26 +01:00
Daniel P. Berrange
c70a6154b6 Add a qemuMonitorGetCommands() method for QMP query-commands command
Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available

The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 11:04:32 +01:00
Daniel P. Berrange
2ecec6e206 Add a qemuMonitorGetCPUDefinitions method for QMP query-cpu-definitions command
Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:53:24 +01:00
Daniel P. Berrange
3999372182 Add a qemuMonitorGetMachines() method for QMP query-machines command
Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:47:16 +01:00
Daniel P. Berrange
3dce0a829a Add a qemuMonitorGetVersion() method for QMP query-version command
Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:46:34 +01:00
Daniel P. Berrange
ed769e1854 Remove probing of CPU models when launching QEMU guests
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.

As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:24:52 +01:00
Daniel P. Berrange
bd66c243b3 Remove probing of machine types when canonicalizing XML
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-27 10:24:52 +01:00