Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:
"entering monitor without asking for a nested job is dangerous"
The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.
This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.
https://bugzilla.redhat.com/show_bug.cgi?id=1130089
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1086121
We now support startupPolicy='optional' for disks, but this
should work only for cold boot, not for restore or migrate.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently, only LXC has hostdev mode 'capabilities' support,
so the other drivers should forbid to define it in XML.
The hostdev mode check is added to devicesPostParseCallback()
for each hypervisor driver.
But there are some drivers lack function devicesPostParseCallback(),
so only add check for qemu, libxl, openvz, uml, xen, xenapi.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
As we are doing with the enum structures, a cleanup in "src/qemu/"
directory was done now. All the enums that were defined in the
header files were converted to typedefs in this directory. This
patch includes all the adjustments to remove conflicts when you do
this kind of change. "Enum-to-typedef"'s conversions were made in
"src/qemu/qemu_{capabilities, domain, migration, hotplug}.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.
The current implementation of 'virsh blockcopy' (virDomainBlockRebase)
is limited to copying to a local file name. But future patches want
to extend it to also copy to network disks. This patch converts over
to a virStorageSourcePtr, although it should have no semantic change
visible to the user, in anticipation of those future patches being
able to use more fields for non-file destinations.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of
mirror information.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Localize
mirror parsing into new object.
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
domain disk source to be a pointer.
In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change. It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
My future work will modify the metadata crawler function to use the
storage driver file APIs to access the files instead of accessing them
directly so that we will be able to request the metadata for remote
files too. To avoid linking the storage driver to every helper file
using the utils code, the backing chain traversal function needs to be
moved to the storage driver source.
Additionally the virt-aa-helper and virstoragetest programs need to be
linked with the storage driver as a result of this change.
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/domain_conf.h" there are many enumerations (enum)
declarations to be converted as a typedef too. As mentioned before,
it's better to use a typedef for variable types, function types and
other usages. I think this file has most of those enum declarations
at "src/conf/". So, me and Eric Blake plan to keep the cleanups all
over the source code. This time, most of the files changed in this
commit are related to part of one file: "src/conf/domain_conf.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Coverity complains about event being leaked in
qemuDomainCheckRemoveOptionalDisk. The best fix for it is to remove the
disk directly since we already know its index.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When qemu driver is polling for migration to finish (in
qemuMigrationWaitForCompletion), it may happen that another job allowed
during migration is running and if it does not finish within 30 seconds,
migration would be cancelled because of that. However, we can just
ignore the timeout and let the waiting loop try again later.
If an event fired at the end of migration is ever implemented in QEMU,
we can just wait for the event instead of polling for migration status
and libvirt will behave consistently, i.e., migration won't be cancelled
in case another job started during migration takes long time to finish.
For bug https://bugzilla.redhat.com/show_bug.cgi?id=1083238
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job queue is full or waiting for a job times out, the function
returns -2 so that it can be handled in a different way by callers.
The change is safe since all existing callers of
qemuDomainObjBeginNestedJob check the return value to be less than zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':
- virDomainPCIAddressAsString;
- virDomainPCIAddressBusSetModel;
- virDomainPCIAddressEnsureAddr;
- virDomainPCIAddressFlagsCompatible;
- virDomainPCIAddressGetNextSlot;
- virDomainPCIAddressReleaseSlot;
- virDomainPCIAddressReserveAddr;
- virDomainPCIAddressReserveNextSlot;
- virDomainPCIAddressReserveSlot;
- virDomainPCIAddressSetFree;
- virDomainPCIAddressSetGrow;
- virDomainPCIAddressSlotInUse;
- virDomainPCIAddressValidate;
The only change here is function names, the implementation itself
stays untouched.
Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.
Adds 'quiesced' status into qemuDomainObjPrivate that tracks whether
FSFreeze is requested in the domain.
It modifies error code from qemuDomainSnapshotFSFreeze and
qemuDomainSnapshotFSThaw, so that a caller can know whether the command is
actually sent to the guest agent. If the error is caused before sending a
freeze command, a counterpart thaw command shouldn't be sent either, not to
confuse fsfreeze status tracking.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To avoid memory leak of the "backingStoreRaw" field when reparsing
backing chains a new function is being introduced by this patch that
shall be used to clear backing store information.
The memory leak was introduced in commit 8823272d41a259c1246c05d.
To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.
Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.
This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.
To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.
Switch over to storing of the backing chain as a recursive
virStorageSource structure.
This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.
It's easy to shed the daemon these days. With this XML snippet:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/some/dummy/path/test.bin'>
<seclabel model='dac' relabel='no'/>
</source>
<target dev='vdb' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</disk>
I get the SIGSEGV when starting the domain. The thing is, when
starting a domain, we check for its disk presence. For some reason,
when determining the disk chain, we parse the <seclabel/> (don't ask
me why). However, there's no label attribute in the XML, so we end up
calling virParseOwnershipIds() over NULL string:
[Switching to Thread 0x7ffff10c4700 (LWP 30956)]
__strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
136 ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory.
(gdb) bt
#0 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
#1 0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115
#2 0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385
#3 qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414
#4 0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250
#5 0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0,
vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813
#6 0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051
#7 0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105
#8 0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
There is no keyboard working on PPC64 and PS2 mouse is only for X86
when graphics are enabled.
Add a USB keyboard and USB mouse for PPC64 when graphics are enabled.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, there's just one place where we care if hook script is
changing the domain XML: migration hook for incoming migration. In
all other places where a hook script is executed, we don't read the
XML back from the script.
Anyway, the hook script can alter domain XML and hence we should taint
it if the script did.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code took into account only the global permissions. The domains now
support per-vm DAC labels and per-image DAC labels. Use the most
specific label available.
