These are imported from Fedora 38's edk2 package.
The files that are being replaced date back to RHEL 7 and no
longer represent what libvirt is likely to encounter on an
actual production system.
Notably, the paths have all changed, with both x86_64 and
aarch64 builds now living under /usr/share/edk2 and the AAVMF
name being having been phased out.
Additionally, the 4MB qcow2 format builds have been introduced
on x86_64 and given high priority, effectively making qcow2
the default format across architectures.
The impact of these changes on the test suite is, predictably,
quite severe.
For the cases where paths to firmware files were explicitly
provided as part of the input, they have been adjusted so that
the modern paths are used instead of the legacy ones. Other
than that, input files have been left untouched.
The following expected changes can be seen in output files:
* where qcow2 firmware was used on x86_64, Secure Boot
support is now enabled;
* all ABI_UPDATE test cases for x86_64 now use qcow2
formatted firmware;
* test cases where legacy paths were manually provided
no longer get additional information about the firmware
added to the output XML.
Some of the changes described above highlight why, in order
to guarantee a stable guest ABI over time and regardless of
changes to the host's configuration, it was necessary to move
firmware selection from VM startup time to VM creation time.
In a few cases, updating the firmware descriptors changes the
behavior in a way that's undesired and uncovers latent bugs
in libvirt:
* firmware-manual-efi-secboot-legacy-paths ends up with
Secure Boot disabled, despite the input XML specifically
requesting it to be enabled;
* firmware-manual-efi-rw-modern-paths loses the
loader.readonly=no part of the configuration and starts
using an NVRAM file;
* firmware-manual-efi-nvram-template-nonstandard starts
failing altogether with a fairly obscure error message.
We're going to address all these issues with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of these are just additional coverage, but a few demonstrate
bugs in libvirt:
* firmware-manual-efi-nvram-template-nonstandard sees the NVRAM
template path, which was explicitly provided in the XML,
being overridden by the firmware selection machinery;
* firmware-auto-efi-rw* and firmware-manual-efi-rw-legacy-paths
lose the loader.readonly=no setting and thus behave
differently than requested;
* firmware-manual-efi-loader-path-nonstandard fails because an
NVRAM path doesn't get generated.
We're going to address all these issues with upcoming changes.
Note that the firmware-auto-efi-nvram-template-nonstandard
failure is expected: firmware autoselection has been enabled, but
the NVRAM template points to a custom path that's not mentioned
in any of the firmware descriptors and so it can't succeed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new name better describes the test scenario and will fit
better with the additional tests that we're about to introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have a number of tests that can benefit from this macro
instead of open-coding it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a config where both DIMM and non-DIMM <memory> devices are used so
that it validates that only DIMMs require memory slots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the unnecessary disk definition and use x86_64 emulator.
For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and add a '_CAPS_LATEST' invocation.
For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.
There are no sound-device relevant changes in the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a subset of what the 'sound-device' case tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the lookup of the corresponding QMP schema used for validation of
QMP commands from 'testCompareXMLToArgvValidateSchema' to
testQemuGetRealCaps as an optional step.
This will simplify using QMP command validation in other tests which
will use testQemuGetRealCaps.
'testutilsqemuschema' module is now linked into 'test_utils_qemu' as it
contains no monitor-specific code itself and after this patch it's
referenced directly from that module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
