Commit Graph

29 Commits

Author SHA1 Message Date
Roman Bogorodskiy
daecaea038 bhyve: add xhci tablet support
Along with video and VNC support, bhyve has introduced USB tablet
support as an input device. This tablet is exposed to a guest
as a device on an XHCI controller.

At present, tablet is the only supported device on the XHCI controller
in bhyve, so to make things simple, it's allowed to only have a
single XHCI controller with a single tablet device.

In detail, this commit:

 - Introduces a new capability bit for XHCI support in bhyve
 - Adds an XHCI controller and tabled support with 1:1 mapping
   between them
 - Adds a couple of unit tests
2017-03-26 19:22:30 +04:00
Roman Bogorodskiy
b17bb82838 bhyve: test cases for VNC
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
2017-03-11 23:31:01 +04:00
Fabian Freyer
42f58ff699 bhyve: test cases for UEFI bhyvexml2argvtest
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
2017-03-11 23:02:12 +04:00
Roman Bogorodskiy
5620c60959 bhyve: add e1000 nic support
Recently e1000 NIC support was added to bhyve; implement that in
the bhyve driver:

 - Add capability check by analyzing output of the 'bhyve -s 0,e1000'
   command
 - Modify bhyveBuildNetArgStr() to support e1000 and also pass
   virConnectPtr so it could call bhyveDriverGetCaps() to check if this
   NIC is supported
 - Modify command parsing code to add support for e1000 and adjust tests
 - Add net-e1000 test
2017-02-11 06:51:28 +04:00
Roman Bogorodskiy
66c21aee89 bhyve: fix virtio disk addresses
Like it usually happens, I fixed one thing and broke another:
in 803966c76 address allocation was fixed for SATA disks, but
broke that for virtio disks, because it dropped disk address
assignment completely. It's not needed for SATA disks anymore,
but still needed for the virtio ones.

Bring that back and add a couple of tests to make sure it won't
happen again.
2017-02-07 19:17:58 +04:00
Roman Bogorodskiy
ae01530cb4 bhyve: add tests for SATA address allocation 2017-01-30 20:48:42 +04:00
Roman Bogorodskiy
803966c76d bhyve: fix SATA address allocation
As bhyve for a long time didn't have a notion of the explicit SATA
controller and created a controller for each drive, the bhyve driver
in libvirt acted in a similar way and didn't care about the SATA
controllers and assigned PCI addresses to drives directly, as
the generated command will look like this anyway:

 2:0,ahci-hd,somedisk.img

This no longer makes sense because:

 1. After commit c07d1c1c4f it's not possible to assign
    PCI addresses to disks
 2. Bhyve now supports multiple disk drives for a controller,
    so it's going away from 1:1 controller:disk mapping, so
    the controller object starts to make more sense now

So, this patch does the following:

 - Assign PCI address to SATA controllers (previously we didn't do this)
 - Assign disk addresses instead of PCI addresses for disks. Now, when
   building a bhyve command, we take PCI address not from the disk
   itself but from its controller
 - Assign addresses at XML parsing time using the
   assignAddressesCallback. This is done mainly for being able to
   verify address allocation via xml2xml tests
 - Adjust existing bhyvexml2{xml,argv} tests to chase the new
   address allocation

This patch is largely based on work of Fabian Freyer.
2017-01-30 20:48:42 +04:00
Roman Bogorodskiy
13a050b2c3 bhyve: add virBhyveDriverCreateXMLConf
Add virBhyveDriverCreateXMLConf, a simple wrapper around
virDomainXMLOptionNew that makes it easier to pass bhyveConnPtr
as a private data for parser. It will be used later for device
address allocation at parsing time.

Update consumers to use it instead of direct calls to
virDomainXMLOptionNew.

As we now have proper callbacks connected for the tests, update
test files accordingly to include the automatically generated
PCI root controller.
2017-01-30 20:48:42 +04:00
Roman Bogorodskiy
a6b81d5581 bhyve: fix memory leaks in bhyvexml2argvtest
* virNetDevTapCreateInBridgePort() mock: free '*ifname' before
   strdupping a hardoded value to it
 * testCompareXMLToArgvFiles(): unref 'conn' object in cleanup
 * testCompareXMLToArgvHelper(): free 'ldargs' and 'dmargs' in
   cleanup
2016-11-15 19:07:48 +03:00
Michal Privoznik
c41b989112 virDomainDefParse{File,String}: Introduce @parseOpaque argument
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-26 16:50:12 +02:00
Tomáš Ryšavý
239caffb1d tests: Rename virtTestCompareToFile to virTestCompareToFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Roman Bogorodskiy
ef01addb38 bhyve: bhyveload: respect boot dev and boot order
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
2016-01-25 04:19:33 +03:00
Roman Bogorodskiy
6cb9ef1bab bhyve: add UTC clock support
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.

Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.
2015-07-22 19:05:09 +03:00
Roman Bogorodskiy
846cc14c4d bhyve: fix bhyvexml2argvtest build with gcc
gcc5 reports an error like this:

bhyvexml2argvtest.c: In function 'testCompareXMLToArgvFiles':
bhyvexml2argvtest.c:24:18: error: variable 'vm' set but not used
[-Werror=unused-but-set-variable]
     virDomainObj vm;
                  ^
cc1: all warnings being treated as errors

Fix by dropping this variable.
2015-05-11 20:08:47 +03:00
Roman Bogorodskiy
0d6563d7f0 bhyve: fix build in tests
Commit ca32929 caused build errors in bhyvexml2argvtest.c because of
some undefined variables.

Pushing under the build breaker rule.
2015-04-24 19:54:12 +03:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Roman Bogorodskiy
c42dbd8a18 bhyve: fix build in tests
Commit 835cf84 dropped expectedVirtTypes argument for
virDomainDefParse*() functions, however bhyve tests still try to pass
that to virDomainDefParseFile(), therefore build fails.

Fix build by fixing virDomainDefParseFile() usage.
2015-04-23 10:54:32 +04:00
Daniel P. Berrange
0ecd685109 Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
2015-01-13 16:26:12 +00:00
Conrad Meyer
cdbb21bc59 drvbhyve: Use boot-order for grub-bhyve boot device
Rather than just picking the first CD (or failing that, HDD) we come
across, if the user has picked a boot device ordering with <boot
order=''>, respect that (and just try to boot the lowest-index device).

Adds two sets of tests to bhyve2xmlargv; 'grub-bootorder' shows that we
pick a user-specified device over the first device in the domain;
'grub-bootorder2' shows that we pick the first (lowest index) device.
2014-11-13 15:40:48 +01:00
Conrad Meyer
a52b56b3fd bhyvexml2argv: Add test for grub console support 2014-11-12 09:55:22 +01:00
Conrad Meyer
cf133ed1c6 bhyvexml2argv: Add tests for domain-configured bootloader, args 2014-11-12 09:55:22 +01:00
Conrad Meyer
f2ce9d3645 bhyvexml2argv: Add loader argv tests. 2014-11-12 09:55:22 +01:00
Roman Bogorodskiy
6c2e7d0b17 bhyve: add volumes support
Update bhyveBuildDiskArgStr to support volumes:

 - Make virBhyveProcessBuildBhyveCmd and
   virBhyveProcessBuildLoadCmd take virConnectPtr as the
   first argument instead of bhyveConnPtr as virConnectPtr is
   needed for virStorageTranslateDiskSourcePool,
 - Add virStorageTranslateDiskSourcePool call to
   virBhyveProcessBuildBhyveCmd and
   virBhyveProcessBuildLoadCmd,
 - Allow disks of type VIR_STORAGE_TYPE_VOLUME
2014-08-19 20:50:22 +04:00
Roman Bogorodskiy
d704e69858 bhyve: cdrom support
Add support for CDROM devices for bhyve driver using
bhyve(8)'s 'ahci-cd' device type.

As bhyve currently does not support media insertion at runtime,
disallow to start a domain with an empty source path for cdrom
devices.
2014-07-24 18:56:37 +04:00
Roman Bogorodskiy
07e371fc36 bhyve: improve bhyve_command.c testability
* bhyve_command.c (bhyveBuildNetArgStr, virBhyveProcessBuildBhyveCmd):
  add dryRun mode which doesn't create any devices when enabled
* bhyve_command.c (virBhyveProcessBuildBhyveCmd,
  virBhyveProcessBuildDestroyCmd, virBhyveProcessBuildLoadCmd): accept
  virDomainDefPtr instead of virDomainObjPtr.
2014-05-04 17:43:54 +04:00
Roman Bogorodskiy
548f21d087 tests: use virBhyveCapsBuild in bhyvexml2argv test
As we can use virBhyveCapsBuild() now, replace
testBhyveBuildCapabilities() with it.
2014-04-09 10:27:16 +04:00
Roman Bogorodskiy
4463e438e2 bhyve: add xml2argv tests for console 2014-04-05 19:12:18 +04:00
Roman Bogorodskiy
1994d2dddb bhyve: add xml2args unittest
At this point unittest covers 4 basic cases:

 - minimal working XML for bhyve
 - same as above, but with virtio disk
 - ACPI and APIC args test
 - MAC address test
2014-03-27 08:33:41 +04:00