This functions contains logic that tries to use vhost for virtio
interfaces, even if <driver name='vhost'/> was not supplied.
In this case, a failure is non-fatal.
On my system, /dev/vhost-net was not accessible to the user running
'make check', but we should not depend on that.
Mock it to prevent accessing /dev/vhost-net and return some predictable
file descriptor numbers instead.
Introduced by commit c1f684e - deprecate QEMU_CAPS_VHOST_NET.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Due to conditional execution of virTestRun(), the testCounter was incremented
only if all the cases were run. When using VIR_TEST_RANGE=x-y, first x/2 of the
increments were skipped and that made figuring out a precise case a PITA.
Moving the condition into the test function makes it way nicer to find out the
test numbers to use in VIR_TEST_RANGE.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This function is indeed getting -device properties and not
-object properties. The current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Trying to delete the non-existent TLS objects results in ugly error
messages in the log, which could easily confuse users. Let's avoid this
confusion by not trying to delete the objects if we were not asked to
enable TLS migration and thus we didn't created the objects anyway.
This patch restores the behavior to the state before "qemu: Reset all
migration parameters".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will help us decide what to do when libvirtd is restarted while an
async job is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started QEMU_ASYNC_JOB_DUMP
and we can use them to check whether a memory-only dump is running.
There's no need for a specific bool flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
migrate_cancel QMP command cannot be used for cancelling memory-only
dumps and priv->job.dump_memory_only is used for reporting an error if
someone calls virDomainAbortJob when memory-only dump job is running.
Since commit 150930e309 the dump_memory_only flag is set only if
dump-guest-memory command was called without the detach parameter. This
would incorrectly allow libvirt to send migrate_cancel while the
detached memory-only dump is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an enhanced replacement for the original test from
qemumonitorjsontest which was dropped earlier in this series. More data
files with some real data will be added in the following patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To be able to restore all migration parameters when libvirtd is
restarting during an active migration job, we need to store the original
values of all parameters (stored in priv->job.migParams) in the status
XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most QEMU migration parameters directly correspond to
VIR_MIGRATE_PARAM_* typed parameters and qemuMigrationParamsFromFlags
can automatically set them according to a static mapping between libvirt
and QEMU parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API is renamed as qemuMigrationParamsGetULL and it can be used with
any migration parameter stored as unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an always-on migration capability is supposed to be enabled on both
sides of migration, each side can only enable the feature if it is
enabled by the other side.
Thus the source host sends a list of supported migration capabilities in
the migration cookie generated in the Begin phase. The destination host
consumes the list in the Prepare phase and decides what capabilities can
be enabled when starting a QEMU process for incoming migration. Once
done the destination sends the list of supported capabilities back to
the source where it is used during the Perform phase to determine what
capabilities can be automatically enabled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration capabilities may be enabled automatically, but only if
both sides of migration support them. Thus we need to be able transfer
the list of supported migration capabilities in migration cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration capabilities parsing and formatting at one
place, i.e., in qemu_migration_params.c. The parsing is already there in
qemuMigrationCapsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding support for new migration parameter requires a lot of places to
be changed (most likely by copy&paste engineering): new variables to
store the parameter value and the associated *_set bool, JSON formatter
and parser, XML formatter and parser (to be added soon), and the actual
code to set the parameter. It's pretty easy to forget about some of the
places which need to be updated and end up with incorrect support. The
goal of this patch is to let most of the places do their job without any
modifications when new parameters are added.
To achieve the goal, a new qemuMigrationParam enum is introduced and all
parameters are stored in an array indexed by the items of this enum.
This will also allow us to automatically set the migration parameters
which directly correspond to libvirt's typed parameters accepted by
virDomainMigrate* APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used by the monitor code so we can hide it inside
qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at one
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at once
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is mostly useless and we want to refactor migration parameters
even further. The refactoring will allow us to introduce enhanced tests
for migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use this internal structure only in qemu_migration_params.c and change
other non-test users to use the high level qemuMigrationParams struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's separate the code which queries QEMU for migration parameters from
qemuMigrationParamsCheck into a dedicated function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By merging qemuMigrationAnyCompressionParse into
qemuMigrationParamsSetCompression we can drop the useless intermediate
qemuMigrationCompression structure and parse compression related typed
parameters and flags directly into qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API will soon be called from qemuMigrationParamsFromFlags. Let's
move it to avoid the need to add a forward declaration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's become only a tiny wrapper around virBitmapSetBit, which can easily
be called directly. We don't need to call virBitmapClearBit since
migParams->caps bitmap is initialized with zeros.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far it's used only for CPU throttling parameters which are all ints,
but we'll soon want to use it for more parameters with different types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the calls up the stack to the point where
qemuMigrationParamsFromFlags is called. The end goal achieved in the
following few patches is to merge compression parameters into the
general migration parameters code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
