The keycodemap tool is told to generate docs in rst format now
instead of pod.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2man tool is provided by python docutils, and as the name
suggests, it converts RST documents into man pages.
The intention is that our current POD docs will be converted to
RST format, allowing one more use of Perl to be eliminated from
libvirt.
The manual pages will now all be kept in the docs/manpages/ directory,
which enables us to include the man pages in the published website.
This is good for people searching for libvirt man pages online as it
makes it more likely google will send them to the libvirt.org instead
of some random third party man page site with outdated content.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This flag will allow figuring out whether the hypervisor supports the
incremental backup and checkpoint features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for new backup APIs by describing the XML that will represent
a backup. The XML resembles snapshots and checkpoints in being able
to select actions for a set of disks, but has other differences. It
can support both push model (the hypervisor does the backup directly
into the destination file) and pull model (the hypervisor exposes an
access port for a third party to grab what is necessary). Add
testsuite coverage for some minimal uses of the XML.
The <disk> element within <domainbackup> tries to model the same
elements as a <disk> under <domain>, but sharing the RNG grammar
proved to be hairy. That is in part because while <domain> use
<source> to describe a host resource in use by the guest, a backup job
is using a host resource that is not visible to the guest: a push
backup action is instead describing a <target> (which ultimately could
be a remote network resource, but for simplicity the RNG just
validates a local file for now), and a pull backup action is instead
describing a temporary local file <scratch> (which probably should not
be a remote resource). A future refactoring may thus introduce some
way to parameterize RNG to accept <disk type='FOO'>...</disk> so that
the name of the subelement can be <source> for domain, or <target> or
<scratch> as needed for backups. Future patches may improve this area
of code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
KVM dedicated performance hint is added since qemu version 2.10.0 not
2.10.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The libvirt RPM packaging is quite fine grained but it is not obvious to
users which package is best to install. Add a kbase doc that describes
the different RPMs, and illustrates some example deployment use cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most importantly we document the required heading markup so that we get
consistency across the docs. Also mention that docs should have a table
of contents if they have headings & are likely longer than one page of
text.
The 3-space indent rule may sound wierd, but that's what python has
recommended and thus what tools like pandoc emit. Rather than try to
reindent things to 4-space, just accept this RST norm.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although <tt> is deprecated in HTML5, the rst2html command will still
emit it, in preference to <code> tags, so we must style it too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently only render pretty tables if they have the "top_table"
class set. All of our tables set this, except for the ACL & migration
doc tables, which should have set it, and the API reference which does
not want it.
Simplify life by rendering all tables in a pretty style and remove the
need for the "top_table" class entirely. A small rule turns off the
pretty style for the API reference where tables are a hack used to
render enums with horizontal alignment.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2html output generates the links for headings in a slightly
different way than we do for docs written in HTML, so we must match
another scenario when generating back links.
rst2html will also use <h1> tags for both the document title and
the first level of section titles, so we must expand the matching
to allow for this too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The HTML from rst2html doesn't have <h1> immediately under the <body>
tag, instead there is at least one <div> in between.
There are also many things added in the <head> section that we don't
want to have copied over, since our templating system already adds
suitable <head> elements.
We only need to copy the <script> to make index.html work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2html tool is provided by python docutils, and as the name
suggests, it converts RST documents into HTML.
Basic rules are added for integrating RST docs into the website
build process.
This enables us to start writing docs on our website in RST format
instead of HTML, without changing the rest of our website templating
system away from XSLT yet.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The docs about remote URIs in uri.html are somewhat sparse with the full
docs being in remote.html. Move all the URI content from remote.html
into uri.html so the user only needs to look in one place for URI info.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generation and deployment of x509 certificates for TLS is complex
and verbose and thus deserves its own standalone page.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the max unit of virtio scsi disk is 16383, update the range of
driveUnit to it.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The news schema requires two digits for both month and day in the date
attribute. s/2/02/ in the day value of date to fix the following
'make check' failure
2165) Checking ../docs/news.xml against ../news.rng ...
libvirt: XML Util error : XML document failed to validate against schema:
Unable to validate doc against /home/jfehlig/virt/upstream/libvirt/build/../docs/schemas/../news.rng
Element release failed to validate attributes
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
After generating the API HTML files we run xmllint in docs/html/*.html
to validate the correctness. Since
commit 0aa8536f14
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Nov 20 14:49:26 2019 +0000
docs: generate API reference pages for admin, qemu & lxc libraries
we have many rules generating files into docs/html/. The xmllint
calls for each rule are picking up files which are part-generated by
other parallel build rules resulting in transient errors like:
GEN html/index.html
GEN html/index-admin.html
GEN html/index-qemu.html
GEN html/index-lxc.html
GEN hvsupport.html.in
html/index-lxc.html:1: parser error : Document is empty
^
make[4]: *** [Makefile:2407: html/index-qemu.html] Error 1
The easiest solution is to move the xmllint rules to the 'make check'
phase of the build.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Until now we've only supported <backingStore> in an output mode. The
documentation for the element states that hypervisor drivers may start
to obey it in the future.
Update the documentation so that it mentions the recently added
'backingStoreInput' domain capability and explain what happens if it is
supported and <backingStore> is present on input.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>