It is common for the $HOME/.libvirt/libvirtd.conf file to not
exist. Treat this situation as non-fatal since we can carry
on with our default settings just fine.
* daemon/libvirtd.c: Treat ENOENT as non-fatal when loading
config
The dispatch for the CLOSE RPC call was invoking the method
virNetServerClientClose(). This caused the client connection
to be immediately terminated. This meant the reply to the
final RPC message was never sent. Prior to the RPC rewrite
we merely flagged the connection for closing, and actually
closed it when the next RPC call dispatch had completed.
* daemon/remote.c: Flag connection for a delayed close
* daemon/stream.c: Update to use new API for closing
failed connection
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Add support for a delayed connection close. Rename the
virNetServerClientMarkClose method to virNetServerClientImmediateClose
to clarify its semantics
If a client disconnects while it has a stream active, there is
a race condition which could see libvirtd crash. This is because
the client struct may be freed before the last stream event has
triggered. This is trivially solved by holding an extra reference
on the client for the stream callbak
* daemon/stream.c: Acquire reference on client when adding the
stream callback
If a message packet for a invalid stream is received it is just
free'd. This is not good because it doesn't let the client RPC
request counter decrement. If a stream is shutdown with pending
packets the message also isn't released properly because of an
incorrect header type
* daemon/stream.c: Fix message header type
* src/rpc/virnetserverprogram.c: Send dummy reply instead of
free'ing ignored stream message
The stream code was reusing a stream message object before
it was removed from the linked list of filtered messages.
This caused any later queued messages to be completely lost.
* daemon/stream.c: Delay reuse of stream message until
after it is removed from the queue
The virNetServerClient object had a hardcoded limit of 10 requests
per client. Extend constructor to allow it to be passed in as a
configurable variable. Wire this up to the 'max_client_requests'
config parameter in libvirtd
* daemon/libvirtd.c: Pass max_client_requests into services
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Pass
nrequests_client_max to clients
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow
configurable request limit
Version 1.3 of <sys/sdt.h> uses this macro
#define STAP_CAST(t) (size_t)t
that breaks like this if t is a function
remote.c:1775: error: cast from function call of type 'const char *'
to non-matching type 'long unsigned int' [-Wbad-function-cast]
For that to work it should probably look like this
#define STAP_CAST(t) ((size_t)(t))
In systemtap 1.4 this was completely rewritten.
Anyway, before commit df0b57a95a t was always a variable, but now
also a function is used here, namely virNetSASLSessionGetIdentity.
Use an intermediate variable to avoid this problem.
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
Integer overflow and remote code are never a nice mix.
This has existed since commit 56cd414.
* src/libvirt.c (virDomainGetVcpus): Reject overflow up front.
* src/remote/remote_driver.c (remoteDomainGetVcpus): Avoid overflow
on sending rpc.
* daemon/remote.c (remoteDispatchDomainGetVcpus): Avoid overflow on
receiving rpc.
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl
* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Removes special case code from the generator and handle additional
methods.
The generated version of remoteDispatchDomainPinVcpu(Flags) has no
length check, but this check was useless anyway as it was applied to
data that was already deserialized from its XDR form.
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
The position of the struct parameter in the function signature
differs. Instead of hardcoding the handling for this add an annotation
to the .x file to define the position.
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
The generator can handle DomainBlockPullAll and DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl@us.ibm.com>
Detected by Coverity. Commit ef21beda was incomplete; it solved
a leak one one path, but not on the other.
* daemon/libvirtd.c (qemudSetLogging): Avoid leak on success.
After successfull virDomainSave/virDomainManagedSave calls
the guest will no longer be active, so the domain ID must
be reset to -1
* daemon/remote_generator.pl: Special case virDomainSave &
virDomainManagedSave for same reason as virDomainDestroy
Remove some special case code that took care of mapping hyper to the
correct C types.
As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.
Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.
Suggested by Eric Blake.
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
In most cases this affects flags parameters that are unsigned in the
public and driver API but signed in the XDR protocol. Switch the
XDR protocol to unsigned for those.
A counterexample is virNWFilterGetXMLDesc. Its flags parameter is signed
in the public API and XDR protocol, but unsigned in the driver API.
virNodeGetFreeMemory used unsigned long long in the public API but
signed hyper in the XDR protocol. Convert the XDR protocol to use
unsigned hyper.
As explained by Eric before, this doesn't affect the on-the-wire protocol.
Several functions return values by reference parameters. This is realized
by passing the members of remote_CALL_ret by reference to the called
function.
The position of this parameters in the function signature follows some
patterns with some exceptions. This patterns and exceptions are hardcoded
in the generator.
Add an insert@<offset> annotation to the remote_CALL_ret struct members
for functions that return lists to remove some of the hardcoded patterns
and exceptions.
The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.
* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it. If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib. But this patch
did not turn up any compilation failures on Linux.
* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
virStreamNew needs to dispatch the error that virGetStream reports
on failure.
remoteCreateClientStream can fail due to virStreamNew or due to
VIR_ALLOC. Report OOM error for VIR_ALLOC failure to report errors
in all error cases.
Remove OOM error reporting from remoteCreateClientStream callers.
Extend the QEMU migration cookie structure to allow information
about the destination host graphics setup to be passed by to
the source host. This will enable seamless migration of any
connected graphics clients
* src/qemu/qemu_migration.c: Add graphics info to migration
cookies
* daemon/libvirtd.c: Always initialize gnutls to enable
x509 cert parsing in QEMU
The public API and RPC over-the-wire format have no flags argument,
so neither should the internal callback API. This simplifies the
RPC generator.
* src/driver.h (virDrvNWFilterDefineXML): Drop argument that does
not match public API.
* src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise.
* src/libvirt.c (virNWFilterDefineXML): Likewise.
* daemon/remote_generator.pl: Drop special case.
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:
> * The RPC implementation in libc is obsoleted. Old programs keep working
> but new programs cannot be linked with the routines in libc anymore.
> Programs in need of RPC functionality must be linked against TI-RPC.
> The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
> Visible changes of this change include (obviously) the inability to
> link
> programs using RPC functions without referencing the TI-RPC library,
> the
> removal of the RPC headers from the glibc headers, and the lack of
> symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
> Implemented by Ulrich Drepper.
(from glibc NEWS)
Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.
When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:
/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here
/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here
/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* daemon/Makefile.am (DAEMON_GENERATED, remote_dispatch_*.h)
(qemu_dispatch_*.h): Update to live in srcdir, since they are
distributed.
Detected by Daniel P. Berrange's autobuilder.
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
Stop storing the generated files for the remote protocol client
and server in source control. The generated files will still be
included in the result of 'make dist' to avoid end-users needing
to generate the files
Signed-off-by: Eric Blake <eblake@redhat.com>
Unfortunately, this means that the strings marked for translation
in generated files are not picked up by gnulib's syntax-check,
I'm working on fixing that in gnulib.
* .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.
Always generate the rpc files, and require rpcgen during bootstrap.
* daemon/Makefile.am: Removed generated files with
maintainer-clean target
* src/Makefile.am: Removed generated files with
maintainer-clean target. Always run 'rpcgen' if
generated files are missing
In preparation for removing generated files, it is necessary
to tell automake that the generated files must be distributed
but not directly compiled (since they are included into the
body of a larger .c file that is compiled). Hence, even though
these files are code and not headers in the strict sense of
the word, it is easier to rename them to .h for automake's sake.
* daemon/remote_client_bodies.c: Rename to .h.
* daemon/qemu_client_bodies.c: Likewise.
* src/remote/remote_client_bodies.c: Likewise.
* src/remote/qemu_client_bodies.c: Likewise.
* daemon/Makefile.am (remote_dispatch_bodies.c)
(qemu_dispatch_bodies.c): Rename to .h.
(remote.c, EXTRA_DIST): Reflect rename.
* daemon/remote.c: Likewise.
* daemon/remote_generator.pl: Likewise.
* src/Makefile.am (remote/remote_driver.c): Likewise.
* src/remote/remote_driver.c: Likewise.
* po/POTFILES.in: Likewise.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h)
(exclude_file_name_regexp--sc_require_config_h_first)
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF):
Likewise.
