Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
(cherry picked from commit 86032b2276)
Conflicts:
src/qemu/qemu_process.c
Currently, we are passing only one boolean (migrated) so there is
no real profit in this. But it creates starting position for
next patch.
(cherry picked from commit 69dd77149c)
Conflicts:
src/qemu/qemu_process.c
A few examples for <interface> had a type='direct' interface with no
sub-elements. This is not allowed - a type='direct' interface must
have at least a source element. (Most likely the example was copied
from the type='user' or type='ethernet' examples - they *do* allow an
instance with no sub-elements).
There was also one place that mistakenly used %lt; ... %gt; instead of
< ... > (for some reason, I make that typo all the time).
(cherry picked from commit 549741ee44)
Eric Blake and Guido Günther were guests during this week's
FLOSS Weekly podcast, giving insights into libvirt as a Free
Software project. Also, there are several useful blogs on
virt-related topics.
* docs/relatedlinks.html.in (Blogs and Podcasts): New section.
(cherry picked from commit a0ac7450d9)
Commits 51082301, 16d7b39, and 521cc447 introduced support for
'virsh snapshot-list --from' when talking to a server older than
0.9.5, but broke support for plain 'virsh snapshot-list' for the
same old server in the process. Because the code is not properly
gated, we end up with a SIGSEGV during a strcmp with a NULL argument.
* tools/virsh.c (cmdSnapshotList): Don't waste time on fallbacks
when --from is not present.
(cherry picked from commit d9f6066598)
when do remount,the source and target should be the same
values specified in the initial mount() call.
So change fs->dst to src.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
(cherry picked from commit 0cb787bd3c)
For pseries guest, spapr-vlan and spapr-vty is based
on spapr-vio address. According to model of network
device, the address type should be assigned automatically.
For serial device, serial pty device is recognized as
spapr-vty device, which is also on spapr-vio.
So this patch is to correct the address type of
spapr-vlan and spapr-vty, and build correct
command line of spapr-vty.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman<michaele@au1.ibm.com>
(cherry picked from commit 04a319ba4e)
While libvirt intentionally avoids -Wundef (after all, C99
guarantees sane semantics of treating undefined macros as 0),
the glibc insanity of #warning on _FORTIFY_SOURCE coupled with
what some people feel is the black magic of autoconf means
that other projects are likely to copy our snippet verbatim.
We can be nicer to other projects by making it easier to
integrate into projects that use -Wundef.
Suggested by Christophe Fergeau.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Be nice
to other projects using -Wundef.
(cherry picked from commit 1c2edf0fbd)
There is a theoretical problem of an extreme bug where we can get
into deadlock due to command handshaking. Thanks to a pair of pipes,
we have a situation where the parent thinks the child reported an
error and is waiting for a message from the child to explain the
error; but at the same time the child thinks it reported success
and is waiting for the parent to acknowledge the success; so both
processes are now blocked.
Thankfully, I don't think this deadlock is possible without at
least one other bug in the code, but I did see exactly that sort
of situation prior to commit da831af - I saw a backtrace where a
double close bug in the parent caused the parent to read from the
wrong fd and assume the child failed, even though the child really
sent success.
This potential deadlock is not quite like commit 858c247 (a deadlock
due to multiple readers on one pipe preventing a write from completing),
although the solution is similar - always close unused pipe fds before
blocking, rather than after.
* src/util/command.c (virCommandHandshakeWait): Close unused fds
sooner.
(cherry picked from commit 5e8ab3915b)
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 7508338ff3)
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early. This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt. The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.
Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.
* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
(cherry picked from commit 858c2476d9)
glibc 2.15 (on Fedora 17) coupled with explicit disabling of
optimization during development dies a painful death:
In file included from /usr/include/limits.h:27:0,
from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/limits.h:169,
from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/syslimits.h:7,
from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/limits.h:34,
from util/bitmap.c:26:
/usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
cc1: all warnings being treated as errors
Work around this by only conditionally defining _FORTIFY_SOURCE,
in the case where glibc can actually use it. The trick is using
AH_VERBATIM instead of AC_DEFINE.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Squelch
_FORTIFY_SOURCE when needed to avoid glibc #warnings.
(cherry picked from commit 2af63b1c34)
The stream lock is unlocked twice instead of being locked and then
unlocked. Probably a typo.
(cherry picked from commit 107f51b69c)
Conflicts:
AUTHORS
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".
This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
(cherry picked from commit 6734ce7bc8)
This patch makes virt-pki-validate work with certificates that have
acl or xattr set. Otherwise it failing due to wrong permissions.
(cherry picked from commit d4fb6694a4)
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().
Bug present since 0.9.5 (commit 326176179).
(cherry picked from commit b19c236d69)
We should not set *outfd or *errfd if virExecWithHook() failed
because the caller may close these fds.
Bug present since v0.4.5 (commit 60ed1d2a).
(cherry picked from commit 746ff701e8)
Wen Congyang reported that we have a double-close bug if we fail
virFDStreamOpenInternal, since childfd duplicated one of the fds[]
array contents. In truth, since we always transfer both members
of fds to other variables, we should close the fds through those
other names, and just use fds[] for pipe().
Bug present since 0.9.0 (commit e886237a).
* src/fdstream.c (virFDStreamOpenFileInternal): Swap scope of
childfd and fds[], to avoid a double close.
(cherry picked from commit f3cfc7c884)
KAMEZAWA Hiroyuki reported a nasty double-free bug when virCommand
is used to convert a string into input to a child command. The
problem is that the poll() loop of virCommandProcessIO would close()
the write end of the pipe in order to let the child see EOF, then
the caller virCommandRun() would also close the same fd number, with
the second close possibly nuking an fd opened by some other thread
in the meantime. This in turn can have all sorts of bad effects.
The bug has been present since the introduction of virCommand in
commit f16ad06f.
This is based on his first attempt at a patch, at
https://bugzilla.redhat.com/show_bug.cgi?id=823716
* src/util/command.c (_virCommand): Drop inpipe member.
(virCommandProcessIO): Add argument, to avoid closing caller's fd
without informing caller.
(virCommandRun, virCommandNewArgs): Adjust clients.
(cherry picked from commit da831afcf2)
Autoconf 2.60 and later insist on using ${datarootdir}, rather than
the derived ${datadir} (although the latter defaults to the former,
it is possible to set configure arguments so that they differ):
config.status: creating libvirt.pc
config.status: WARNING: 'libvirt.pc.in' seems to ignore the --datarootdir setting
This patch follows the autoconf manual's suggestions for how to
support 2.59 (RHEL 5) and newer simultaneously.
* libvirt.pc.in (datarootdir): Define, so ${datadir} will not ignore
datarootdir when using newer autoconf.
(cherry picked from commit aabf77aa41)
Currently, we are logging only one side of pipes we
create in virCommandRequireHandshake(); This is enough
in cases where pipe2() returns two consecutive FDs. However,
it is not guaranteed and it may return any FDs.
Therefore, it's wise to log the other ends as well.
(cherry picked from commit 7454849ec5)
When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.
(cherry picked from commit 87dfdb0b92)
A while back I wrote the attached code to demonstrate how to use
events and serial console to create a serial console that stays up
even when the VM is down. It might need some work, as I am not
terribly strong with Python.
* examples/python/consolecallback.py: New file.
* examples/python/Makefile.am (EXTRA_DIST): Ship it.
(cherry picked from commit ffc9f7ab4f)
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240== by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240== by 0x509C677: virVasprintf (stdio2.h:199)
==3240== by 0x509C733: virAsprintf (util.c:1912)
==3240== by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240== by 0x511991D: virStateInitialize (libvirt.c:809)
==3240== by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240== by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240== by 0x7953D8F: start_thread (pthread_create.c:309)
==3240== by 0x805FF5C: clone (clone.S:115)
(cherry picked from commit 67dd486f20)
Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 6c10c04c39)
Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a9c779caf3)
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c5c3278e9b)
(crobinso: Fix spacing to appease tests/daemon-conf, which is
still in -maint branch)
When you try to connect to a socket in the abstract namespace,
the error will be ECONNREFUSED for a non-listening daemon. With
the non-abstract namespace though, you instead get ENOENT. Add
a check for this extra errno when auto-spawning the daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 54c4d9d90b)
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit ebbcc02639)
* configure.ac (AM_PROG_CC_STDC): Stop using this macro.
It provokes warnings from newer automake and is superseded by
autoconf's AC_PROG_CC, which we're already using.
(cherry picked from commit 0d07aa512c)
Add a note about setting the LIBVIRT_DRIVER_DIR env variable,
explain --system and fix example to use --disable-werror
(cherry picked from commit 4878a33125)
If vdsm is installed and configured in Fedora 17, we add the following
items into qemu.conf:
spice_tls=1
spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
However, after this changes, augtool cannot identify qemu.conf anymore.
(cherry picked from commit cdd762e425)
With the switch to modules by default, I was getting super long
test output:
TEST: /home/remote/eblake/libvirt/tests/.libs/lt-interfacexml2xmltest
compared to the former:
TEST: interfacexml2xmltest
* tests/testutils.c (virtTestMain): Trim off libtool goop.
(cherry picked from commit ee40725510)
The apibuild.py parser needs to be able to parse & ignore
any VIR_ENUM_IMPL/VIR_ENUM_DECL macros in the source. Add
some special case code to deal with this rather than trying
to figure out a generic syntax for parsing macros.
* apibuild.py: Special case VIR_ENUM_IMPL & VIR_ENUM_DECL
(cherry picked from commit 45b43a8cab)
The libvirt_private.syms file exports virNetlinkEventServiceLocalPid
so there needs to be a no-op stub for Win32 to avoid linker errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 2d191e8e27)
