We can use our VIR_AUTOPTR machinery also for libxml2's xmlDoc and
xmlXPathContext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Checking that the derived class is larger than the requested parent
class saves us from some obvious mistakes, but as written, it does not
catch all the cases; in particular, it is easy to forget to update a
VIR_CLASS_NEW when changing the 'parent' member from virObject to
virObjectLockabale, but where the size checks don't catch that. Add a
parameter for one more layer of sanity checking.
It would be cool if we could get gcc to stringize typeof(parent) into
the string name of that type, so that we could confirm that the
precise parent class is in use rather than just a struct that happens
to have the same size as the parent class. But sizeof checks are
better than nothing.
Note that I did NOT change the fact that we require derived classes to
be larger (as the difference in size makes it easy to tell classes
apart), which means that even if a derived class has no functionality
to add (but rather exists for compiler-enforced type-safety), it must
still include a dummy member. But I did fix the wording of the error
message to match the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some modules/libraries within QEMU could make use of the XDG_ vars when
writing their data to the disk. Define the most common XDG variables
and point them to the specific driver's libDir, i.e.
XDG_CACHE_HOME -> /var/lib/libvirt/<driver>/.cache
XDG_DATA_HOME -> /var/lib/libvirt/<driver>/.local/share
XDG_CONFIG_HOME -> /var/lib/libvirt/<driver>/.config
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I had to inspect the code to learn whether a final virObjectUnref()
calls ALL dispose callbacks in child-to-parent order (akin to C++
destructors), or whether I manually had to call a parent-class dispose
when writing a child class dispose method. The answer is the
former. (Thankfully, since VIR_FREE wipes out pointers for safety,
even if I had guessed wrong, I probably would not have tripped over a
double-free fault when the parent dispose ran for the second time). I
also had to read the code to learn if a dispose method was even
mandatory (it is not, although getting NULL through VIR_CLASS_NEW
requires a macro). While at it, the VIR_CLASS_NEW macro requires that
the virObject component at offset 0 be reached through the name
'parent', not 'object'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This helper performs a conversion from a "yes|no" string to a
corresponding boolean. This allows us to drop several repetitive
if-then-else string->bool conversion blocks.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to CAT, when you set some values in an group, remove the group and
recreate it, the previous values will be kept there. In order to not get values
from a previous setting (a previous VM, for example), we need to set them to
sensible defaults. The same way we do that for CAT, just set the same values as
the default group has.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For CAT we calculate unallocated parts of the cache, however with MBA this does
not make sense as the purpose of that is to limit the bandwidth and the setting
is only proportional relative to bandwidth settings for other groups.
This means it makes sense to set the values to 100% even if there are other
groups with some allocations and that we don't need to find the available
(unallocated) bandwidth in all the groups.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Only PCI devices have '/sys/class/net/<ifname>/device/resource' so we
need to skip this check for all other network devices.
Without this patch and RDMA enabled libvirt will not detect any network
device that doesn't have the path above which includes 'lo', 'virbr',
'tun', etc.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1639258
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can use STRNEQ() instead of STRNEQLEN() since we're only
interested in the trailing part of the string and we've
already verified that the length of file, name and suffix
are those we expect.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's a predicate, so bool is the appropriate return type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
While this function is not, strictly speaking, a predicate,
it still mostly behaves like one as evidenced by the vast
majority of its callers, so using bool rather than int as
the return type makes sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's a predicate, so bool is the appropriate return type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This is the case-sensitive counterpart of the existing
virStringHasCaseSuffix() function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
In these cases the check that is removed has been done a few
lines above already (as can even be seen in the context). Drop
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The function does not transfer errors from 'attrBuf' and 'childBuf'
arguments into 'buf', but rather reports them right away, thus we need
to make sure that it's always checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used by the VIR_AUTOUNREF macro. Prior art is to
clear the pointer even if the variable goes out of scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'd free only the first element of the vector leaking the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We don't need it as there's a separate macro for auto-freeing of string
lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use of VIR_AUTOPTR and virString is confusing as it's a list and not a
single pointer. Replace it by VIR_AUTOSTRINGLIST as string lists are
basically the only sane NULL-terminated list we can have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to VIR_AUTOPTR, VIR_AUTOSTRINGLIST defines a list of strings
which will be freed if the pointer is leaving scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For consistency with other error messages, and the fact that
the object is always called a virDomainSnapshot rather than
a mere virSnapshot, include the word "domain" in the error
message.
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
libvirt_iohelper is used internally by the virFileWrapperFd APIs;
more specifically, in the QEMU driver we have the doCoreDump() and
qemuDomainSaveMemory() helper functions as users, and those in turn
end up being called by the implementation of several driver APIs.
By calling virReportError() if libvirt_iohelper has failed, we
overwrite whatever generic error message QEMU might have raised
with the more useful one generated by the helper program.
After this commit, the user will be able to see the error directly
instead of having to dig in the journal or libvirtd log.
https://bugzilla.redhat.com/show_bug.cgi?id=1578741
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileWrapperFdFree(), like all free functions, is supposed
to only release allocated resources, so error reporting is
better suited for virFileWrapperFdClose().
This reverts commit b0c3e93180.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll want to use this function in the cleanup path soon,
and in order to be able to do that we need to make sure we
can call it multiple times on the same virFileWrapperFd
without side effects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new utility macros are useful for variables we put on the stack but
require some cleanup. The most prominent of those is virBuffer which is
used almost exclusively in that way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The conversion to VIR_AUTOFREE of 'escapeList' introduced memory leak of
the copied item to be escaped:
==17517== 2 bytes in 1 blocks are definitely lost in loss record 1 of 32
==17517== at 0x483880B: malloc (vg_replace_malloc.c:309)
==17517== by 0x54D666D: strdup (in /usr/lib64/libc-2.28.so)
==17517== by 0x497663E: virStrdup (virstring.c:956)
==17517== by 0x497663E: virStrdup (virstring.c:945)
==17517== by 0x48F8853: virBufferEscapeN (virbuffer.c:707)
==17517== by 0x403C9D: testBufEscapeN (virbuftest.c:383)
==17517== by 0x405FA8: virTestRun (testutils.c:174)
==17517== by 0x403A70: mymain (virbuftest.c:517)
==17517== by 0x406BC9: virTestMain (testutils.c:1097)
==17517== by 0x5470412: (below main) (in /usr/lib64/libc-2.28.so)
[...] (all other have same backtrace as it happens in a loop)
Fix it by reverting all the VIR_AUTO nonsense in this function as there
is exactly one place where it's handled.
This effectively reverts commits:
d0a92a037196fbf6df90d261ed2fb1
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'virBufferFreeAndReset' does not free the top level structure itself.
Additionally we almost exclusively use stack'd buffers rather than
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This fixes a bug that has been present since the original version of
the function was pushed in commit 1ab80f3 on Nov. 26 2010 (by me). The
virSocketAddr::len was not being set.
Apparently until now we were always calling
virSocketAddrPrefixToNetmask with virSocketAddr object that was
already (coincidentally) initialized for the proper address family,
but the bug became apparent when trying to use it to fill in an
otherwise uninitialized object.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The iohelper is an internal program that's only supposed to
be called by libvirt, and whatever output it might produce
will ultimately be passed to virReportError() or similar.
Since we do not want strings passed to those functions to
contain newlines, we can simply not output them in the first
place.
This is what happens in pretty much all cases already, but
in a couple instances newlines have managed to slip in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The newline was pretty arbitrary, and we're better off
without it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The memory allocated by VIR_REALLOC_N() is uninitialized,
which means it's not possible to figure out whether any
output was produced at all after the fact.
Since we don't care about the previous contents of buffers,
if any, use VIR_FREE() followed by VIR_ALLOC_N() instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
