The aim of this API is to allow the caller to do best effort.
Some functions can work even when acquiring the job fails (e.g.
qemuConnectGetAllDomainStats()). But what they can't bear is
delay if they have to wait up to 30 seconds for each domain that
is processing some other job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The variable is initialized to -1 already. There's no way it can
be overwritten by the time control gets to the line I'm removing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Provide a small comment on the function and its parameters.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Fix the return value status comparison checking for call to
virJSONValueObjectCreateVArgs introduced by commit id f0a23c0c3.
If a NULL arglist is passed, then a 0 is returned which is a
valid status and we only should fail when the return is < 0.
This resolves an issue seen for "virsh iothreadadd $dom $iothread"
where a "error: An error occurred, but the cause is unknown" error
was generated when trying to hotplug an IOThread to a domain since
qemuDomainHotplugAddIOThread passes a NULL arglist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591561
For reasons I don't understand my original patch of 75f0fd5112
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query-sev-capabilities command fails if SEV is not compiled in,
even though both the command and -object sev-guest are present
in that case :/
Ignore the errors to avoid spamming the logs:
internal error: unable to execute QEMU command 'query-sev-capabilities': SEV feature is not available
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A common cleanup path for both the success and the error case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Make the function prefix match the file it's in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Free tmp even on failure.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is only used in one place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is not freed anywhere. Nor in the error paths. Also
the usage virCommand with respect to buffer is very odd.
==2504== 1,100 bytes in 1 blocks are definitely lost in loss record 167 of 175
==2504== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==2504== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==2504== by 0x5D32EE2: virReallocN (viralloc.c:245)
==2504== by 0x5D37278: virBufferGrow (virbuffer.c:150)
==2504== by 0x5D3783E: virBufferVasprintf (virbuffer.c:408)
==2504== by 0x5D377A9: virBufferAsprintf (virbuffer.c:381)
==2504== by 0x57017C1: qemuBuildSevCommandLine (qemu_command.c:9707)
==2504== by 0x57030F7: qemuBuildCommandLine (qemu_command.c:10324)
==2504== by 0x575FA48: qemuProcessCreatePretendCmd (qemu_process.c:6644)
==2504== by 0x11351A: testCompareXMLToArgv (qemuxml2argvtest.c:564)
==2504== by 0x1392F7: virTestRun (testutils.c:180)
==2504== by 0x137895: mymain (qemuxml2argvtest.c:2900)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variable points to a buffer not a domain object therefore its
current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemucapabilitiestest for simplicity uses one test monitor object for
simulating work of two separate inquiries of the qemu process. To allow
better testing in the future it will be required to reset the counter
so that it accurately simulates how qemu would behave.
This patch adds a private monitor API which allows to reset the counter
which will be usable only in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since virConfGetValueBool() can return earlier, the parameter 'value'
might be not initialised properly inside this method. Another proof:
Valgrind is returning this error during the libvirtd daemon startup:
==16199== Conditional jump or move depends on uninitialised value(s)
==16199== at 0x27FFFEF4: virQEMUDriverConfigLoadFile (qemu_conf.c:809)
==16199== by 0x2807665C: qemuStateInitialize (qemu_driver.c:654)
==16199== by 0x5535428: virStateInitialize (libvirt.c:662)
==16199== by 0x12AED8: daemonRunStateInit (remote_daemon.c:802)
==16199== by 0x536DE18: virThreadHelper (virthread.c:206)
==16199== by 0x6CB36DA: start_thread (pthread_create.c:463)
==16199== by 0x6FEC88E: clone (clone.S:95)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU uses /dev/sev device while creating the SEV guest, lets add /dev/sev
in the list of devices allowed to be accessed by the QEMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1583623
When attaching a virtio-scsi with IOThreads for the config of a
live domain, allow the <address> to not be defined thus allowing
post parse processing to fill in the address. This allows parsing
of an individual device to succeed for attach config.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the error a bit clearer that virtio-scsi IOThreads require
virtio pci or ccw controller address types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the error message to indicate what exactly is failing - that
the controller index provided matches an existing controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id '7ef0471bf' added a new parameter to qemuMonitorOpen,
but didn't update the ATTTRIBUTE_NONNULL for the @cb (param 5).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
On start up of libvirtd the worker pool of the QEMU driver must be
initialized before trying to reconnect to all the running QEMU
instances. Otherwise segmentation faults can occur if there are QEMU
monitor events emitted.
#0 __GI___pthread_mutex_lock
#1 0x000003fffdba9e62 in virMutexLock
#2 0x000003fffdbab2dc in virThreadPoolSendJob
#3 0x000003ffd8343b70 in qemuProcessHandleSerialChanged
#4 0x000003ffd836a776 in qemuMonitorEmitSerialChange
#5 0x000003ffd8378e52 in qemuMonitorJSONHandleSerialChange
#6 0x000003ffd8378930 in qemuMonitorJSONIOProcessEvent
#7 0x000003ffd837edee in qemuMonitorJSONIOProcessLine
#8 0x000003ffd837ef86 in qemuMonitorJSONIOProcess
#9 0x000003ffd836757a in qemuMonitorIOProcess
#10 0x000003ffd836863e in qemuMonitorIO
#11 0x000003fffdb4033a in virEventPollDispatchHandles
#12 0x000003fffdb4055e in virEventPollRunOnce
#13 0x000003fffdb3e782 in virEventRunDefaultImpl
#14 0x000003fffdc89400 in virNetDaemonRun
#15 0x000000010002a816 in main
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe. From the differences I only extracted the reply to the new
QMP command and discarded the rest. For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.
In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability. Then removed that one property.
After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One of the things that this is improving is the fact that instead of error
message (that was wrong) you get when starting a domain with SMM and i440fx we
allow the setting to go through. SMM option exists and makes sense on i440fx as
well (basically whenever that _SMM_OPT capability is set).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are still hoping all of such checks will be moved there and this is one small
step in that direction.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Previous patch naively removed all code relevant to disk format
checking. The semantics now dictate that the format check when creating
external snapshots is now impossible as we always fill in the format for
disks in domain definition in the post-parse callback.
Remove the impossible code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option is insecure and it has been long enough for users to migrate
their disk files to use explicit format. Drop the option and related
code.
The config parser still parses it and rejects statup if it's still
present in the config in enabled state.
The augeas lens is also kept so that users can disable it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_tpm.c is not calling any capng_* functions. Let's drop this
include then. This also fixes a build failure without capng.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
swtpm_setup can be run for a TPM 2 in unprivileged mode assuming
XDG_CONFIG_HOME has been set and the necessary configuration files
have been put into that directory.
For current reference also see this link:
https://github.com/stefanberger/swtpm/pull/63
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the external swtpm to the emulator cgroup so that upper limits of CPU
usage can be enforced on the emulated TPM.
To enable this we need to have the swtpm write its process id (pid) into a
file. We then read it from the file to configure the emulator cgroup.
The PID file is created in /var/run/libvirt/qemu/swtpm:
[root@localhost swtpm]# ls -lZ /var/run/libvirt/qemu/swtpm/
total 4
-rw-r--r--. 1 tss tss system_u:object_r:qemu_var_run_t:s0 5 Apr 10 12:26 1-testvm-swtpm.pid
srw-rw----. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 10 12:26 1-testvm-swtpm.sock
The swtpm command line now looks as follows:
root@localhost testvm]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0:c597,c632 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2/ --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --pid file=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.pid
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this patch we label the swtpm process with SELinux labels. We give it the
same label as the QEMU process has. We label its state directory and files
as well. We restore the old security labels once the swtpm has terminated.
The file and process labels now look as follows:
Directory: /var/lib/libvirt/swtpm
[root@localhost swtpm]# ls -lZ
total 4
rwx------. 2 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 4096 Apr 5 16:46 testvm
[root@localhost testvm]# ls -lZ
total 8
-rw-r--r--. 1 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 3648 Apr 5 16:46 tpm-00.permall
The log in /var/log/swtpm/libvirt/qemu is labeled as follows:
-rw-r--r--. 1 tss tss system_u:object_r:svirt_image_t:s0:c254,c932 2237 Apr 5 16:46 vtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep swtpm | grep ctrl | grep -v grep
system_u:system_r:svirt_t:s0:c254,c932 tss 25664 0.0 0.0 28172 3892 ? Ss 16:57 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm1.2 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep qemu | grep tpm | grep -v grep
system_u:system_r:svirt_t:s0:c254,c932 qemu 25669 99.0 0.0 3096704 48500 ? Sl 16:57 3:28 /bin/qemu-system-x86_64 [..]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only start a TPM 1.2.
Upon first start, libvirt will run `swtpm_setup`, which will simulate the
manufacturing of a TPM and create certificates for it and write them into
NVRAM locations of the emulated TPM.
After that libvirt starts the swtpm TPM emulator using the `swtpm` executable.
Once the VM terminates, libvirt uses the swtpm_ioctl executable to gracefully
shut down the `swtpm` in case it is still running (QEMU did not send shutdown)
or clean up the socket file.
The above mentioned executables must be found in the PATH.
The executables can either be run as root or started as root and switch to
the tss user. The requirement for the tss user comes through 'tcsd', which
is used for the simulation of the manufacturing. Which user is used can be
configured through qemu.conf. By default 'tss' is used.
The swtpm writes out state into files. The state is kept in /var/lib/libvirt/swtpm:
[root@localhost libvirt]# ls -lZ | grep swtpm
drwx--x--x. 7 root root unconfined_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:22 swtpm
The directory /var/lib/libvirt/swtpm maintains per-TPM state directories.
(Using the uuid of the VM for that since the name can change per VM renaming but
we need a stable directory name.)
[root@localhost swtpm]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 5 16:46 485d0004-a48f-436a-8457-8a3b73e28568
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28568]# ls -lZ
total 4
drwx------. 2 tss tss system_u:object_r:virt_var_lib_t:s0 4096 Apr 10 21:34 tpm1.2
[root@localhost tpm1.2]# ls -lZ
total 8
-rw-r--r--. 1 tss tss system_u:object_r:virt_var_lib_t:s0 3648 Apr 5 16:46 tpm-00.permall
The directory /var/run/libvirt/qemu/swtpm/ hosts the swtpm.sock that
QEMU uses to communicate with the swtpm:
root@localhost domain-1-testvm]# ls -lZ
total 0
srw-------. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 6 10:24 1-testvm-swtpm.sock
The logfile for the swtpm is in /var/log/swtpm/libvirt/qemu:
[root@localhost-3 qemu]# ls -lZ
total 4
-rw-------. 1 tss tss unconfined_u:object_r:var_log_t:s0 2199 Apr 6 14:01 testvm-swtpm.log
The processes are labeled as follows:
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0-s0:c0.c1023 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log
[root@localhost 485d0004-a48f-436a-8457-8a3b73e28567]# ps auxZ | grep qemu | grep tpm | grep -v grep
system_u:system_r:svirt_t:s0:c413,c430 qemu 18702 2.5 0.0 3036052 48676 ? Sl 16:46 0:08 /bin/qemu-system-x86_64 [...]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement functions for managing the storage of the external swtpm as well
as starting and stopping it. Also implement functions to use swtpm_setup,
which simulates the manufacturing of a TPM, which includes creation of
certificates for the device.
Further, the external TPM needs storage on the host that we need to set
up before it can be run. We can clean up the host once the domain is
undefined.
This patch also implements a small layer for external device support that
calls into the TPM device layer if a domain has an attached TPM. This is
the layer we will wire up later on.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend qemu_conf with user and group for running the tpm-emulator
and add directories to the configuration for the locations of the
log, state, and socket of the tpm-emulator.
Also add these new directories to the QEMU Makefile.inc.am and
the RPM spec file libvirt.spec.in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the QEMU capabilities with tpm-emulator support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id 02b031a4 added a secondary path from which the
incoming @secinfo would not be free'd until the private
data was freed in qemuDomainStorageSourcePrivateDispose.
However, by doing this the original intention to free
@*secinfo afterwards is lost and thus the pass by value
of the secinfo->s.aes (or secinfo->s.plain for its method)
results in not keeping the NULL setting in the various
secret.{username|iv|ciphertext} fields upon return to
qemuDomainSecretInfoClear and eventually will result in
a double free at domain destroy:
raise ()
abort ()
__libc_message ()
malloc_printerr ()
_int_free ()
virFree
qemuDomainSecretAESClear
qemuDomainSecretInfoClear
qemuDomainSecretInfoFree
qemuDomainStorageSourcePrivateDispose
virObjectUnref
virStorageSourceClear
virStorageSourceFree
virDomainDiskDefFree
virDomainDefFree
virDomainObjRemoveTransientDef
qemuProcessStop
qemuDomainDestroyFlags
virDomainDestroy
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Instead of array of pointers to individual buffers it can be
array of buffers directly. This also fixes the following memleak:
==22516== 96 bytes in 4 blocks are definitely lost in loss record 166 of 195
==22516== at 0x4C2EF26: calloc (vg_replace_malloc.c:711)
==22516== by 0x5D2C7D5: virAlloc (viralloc.c:144)
==22516== by 0x56FAABD: qemuBuildNumaArgStr (qemu_command.c:7543)
==22516== by 0x5701835: qemuBuildCommandLine (qemu_command.c:10112)
==22516== by 0x575D794: qemuProcessCreatePretendCmd (qemu_process.c:6568)
==22516== by 0x113338: testCompareXMLToArgv (qemuxml2argvtest.c:549)
==22516== by 0x138CA3: virTestRun (testutils.c:180)
==22516== by 0x136CD1: mymain (qemuxml2argvtest.c:2825)
==22516== by 0x13AD58: virTestMain (testutils.c:1118)
==22516== by 0x137351: main (qemuxml2argvtest.c:2874)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function exists because of 5276ec712a. But it is
missing initial check just like virQEMUCapsInitHostCPUModel()
has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When the agent code was first introduced back in
commit c160ce3316
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Oct 5 18:31:54 2011 +0100
QEMU guest agent support
there was code that would loop and retry the connection when opening
the agent socket. At this time, the only thing done in between the
opening of the monitor socket & opening of the agent socket was a
call to set the monitor capabilities. This was a no-op on non-QMP
versions, so in theory there could be a race which let us connect
to the monitor while the agent socket was still not created by QEMU.
In the modern world, however, we long ago mandated the use of QMP
for managing QEMU, so we're guaranteed to have a set capabilities
QMP call. Once we've seen a reply to this, we're guaranteed that
QEMU has fully initialized all backends and is in its event loop.
We can thus be sure the QEMU agent socket is present and don't need
to retry connections to it, even without having the chardev FD passing
feature.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.
With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The code that detaches the device from persistent definition copies the
persistent definition first so that it can easily be rolled back. The
actual detaching is then made in the copy which is assigned back on
success (if the live operation succeeded as well).
This is not the case in qemuDomainDetachDeviceAliasLiveAndConfig where
the definition was copied and put back, but the detaching happened from
the other object which was overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virCryptoGenerateRandom() is plain wrapper over
virRandomBytes() we can drop it in favour of the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To unify our vir*Random() functions we need to make
virCryptoGenerateRandom NOT allocate return buffer. It should
just fill given buffer with random data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt relies on being able to kill the destination domain and resume
the source one during migration until we called "cont" on the
destination. Unfortunately, QEMU automatically activates block devices
at the end of migration even when it's called with -S. This wasn't a big
issue in the past since the guest is not running and thus no data are
written to the block devices. However, when QEMU introduced its internal
block device locks, we can no longer resume the source domain once the
destination domain already activated the block devices (and thus
acquired all locks) unless the destination domain is killed first.
Since it's impossible to synchronize the destination and the source
libvirt daemons after a failed migration, QEMU introduced a new
migration capability called "late-block-activate" which ensures QEMU
won't activate block devices until it gets "cont". The only thing we
need to do is to enable this capability whenever QEMU supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1568407
QEMU commit implementing the capability: v2.12.0-952-g0f073f44df
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have one place that sets up all disk-related objects to
qemuBlockStorageSourceAttachDataPtr we can easily reuse the data in the
command-line formatter by implementing a worker which will convert the
data.
A huge advantage is that it will be way easier to integrate this with
-blockdev later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new setup function for all the related configuration and
move the setup and attachment of the PR code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a new "Prepare" function and move the drive add code into the new
helpers. This will eventually allow to simplify and unify the attaching
code for use with blockdev at the same time as providing compatibility
with older qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add code that will handle the managed persistent reservations object
separately from the unmanaged one. There is only one managed object so
handling it with disks is awkward and does not scale well when backing
chains come into view.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also since we don't do any conditional formatting, fix the comment for
the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the old qcow2 encryption is removed we can safely delete all
this code since it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to check if TLS is enabled as the variable is a tristate.
Currently we'd setup TLS even if it was explicitly turned off.
Thankfully TLS for disks was only used with the vxhs protocol so hardly
anybody would ever be able to hit the problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Disks are client-only so we don't need to have this variable. We also
always pass false for 'isListen' to qemuBuildTLSx509BackendProps for all
disk-related code-paths so the 'tlsVerify' is ignored anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To keep feature parity, we need to be able to format the PR manager
alias when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Note that it's okay to pass NULL to qemuDomainDelTLSObjects in
qemuDomainAddTLSObjects as the tls-creds-x509 object was either not
created or qemu crashed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new monitor command internal API to allow wrapping of the object
name and alias into the JSON props so that they don't have to be passed
out of band.
The new API also takes a double pointer so that it can be cleared when
the value is consumed so that it does not need to happen in every single
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/virQEMUBuildObjectCommandlineFromJSON/virQEMUBuildObjectCommandlineFromJSONType/
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function generates JSON properties rather than a string so rename
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'secinfo' is present also for migrations. Delete the misleading comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting up the 'secinfo' for the TLS private key password also generates
the given alias, so we don't need to generate another one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alias of the secret for decrypting the TLS passphrase is useless
besides for TLS setup. Stop passing it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We make sure that the disk supports TLS when preparing the environment
so there's no need to duplicate checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Callers need to know the alias anyways so it does not make much sense to
generate it inside of this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildTLSx509CommandLine has no business guessing which alias should
be used. The alias needs to be passed in.
Note that there's a lingering bad design of this, since the secret
object alias is based on the device name and not on the fact that the
secret is used for decrypting of the TLS private key. If we ever add
authentication for chardevs this will bite us.
Thankfully disk code does not support encrypted private keys for TLS so
it can be happily refactored there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the TLS object alias setup earlier. Also make sure that the alias
is not overwritten on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some reason the function returned an error if secAlias was not
passed in. It's not an error, in fact it's desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Select protocol using a switch with all cases enumerated. This will
simplify checking unsupported protocols and adding new support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the loop from qemuDomainPrepareDiskSourceTLS and rename it to
qemuDomainPrepareStorageSourceTLS. Currently there is no backing chain
to prepare so fixing one device is equivalent. In the future it will be
reused in a function which will do the looping.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code into a separate function so that all steps for a
storage protocol are contained and the original function is easily
extendable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using blockdev the approach to base aliases will change. Add a
helper function that will aggregate all code which needs to be called
with the disk alias for the -drive to setup internal data.
qemuDomainSecretDiskPrepare wrapper is no longer necessary as the
contents were moved to a function which is designed to use the old
aliases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the call to the validating function from the function which sets
stuff up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the function to just prepare data for the disk. Callers need to
do the looping since there's more to do than just copy the data around.
The code path in qemuDomainPrepareDiskSource doesn't need to loop over
the chain yet, since there currently is no chain at this point. This
will be addressed later in the blockdev series where we will setup much
more stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainPrepareDiskSourceChain should set up the disk zero detection
mode only for the top level image. Since it's invoked also for the
middle of the chain we need to check that it's really only the top level
image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt would previously lose the alias of the x509
certificate object. Upon unplug we would then not delete the
corresponding objects.
Restore the alias if we know it should be there.
Luckily for disks we don't support encrypted TLS environment, so there's
no need to regenerate the 'secret' alias for decryption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt uses the stored alias to detach the TLS x509 object on disk
unplug. As the alias was not stored, the object would not be detached
if unplugging disks after libvirtd restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using 'haveTLS' to do this is pointless if the alias is not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we remember the alias we've used to attach the secret objects
we should reuse them rather than trying to infer them from the disk
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we did not store the aliases but rather re-generated them
when unplug was necessary. This is very cumbersome since the knowledge
when and which alias to use needs to be stored in the hotplug code as
well.
While this patch will not strictly improve this situation since there
still will be two places containing this code it at least will allow to
remove the mess from the disk-unplug code and will prevent introducing
more mess when adding blockdev support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to figure out which alias was used, store it in the
status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to reference the secret objects by name when hot-unplugging
disks. Don't remove the alias so that it does not need to be
recalculated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's desired to keep the alias around to allow referencing of the secret
object used with qemu. Add set of APIs which will destroy all data
except the alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the logic that determines which secret shall be used into the
caller and make this function work only for plain secrets.
This untangles the control flow by only checking relevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption secret is setup only for LUKS and thus requires the new
approach. Use qemuDomainSecretInfoNew for initializing it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths can't use the unencrypted secret. Add a helper which
checks and sets up an encrypted secret only and reuse it when setting up
the secret to decrypt the TLS private key in qemuDomainSecretInfoTLSNew.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to qemuDomainSecretInfoNewPlain and annotate that it also may
set up a 'plain' secret in some cases. This will eventually be
refactored further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether the storage source requires authentication
secret setup. Rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainSecretStorageSourcePrepare in
qemuDomainSecretHostdevPrepare as it uses a virStorageSource to prepare
the authentication secret object data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper checks that the vm has the master key setup and libvirt
supports the given encryption algorithm.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter qemuBuildVsockDevStr to allow passing a prefix for
the vhostfd file descriptor name. Domain startup uses
the numeric value of fd without a prefix, but hotplug
will need to use a prefix because passed file descriptor
names cannot start with a number.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split out the device string building to allow reuse for hotplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
My commit b8b42ca added support for formatting the vsock
command line without actually checking if it's supported.
Add it to the per-device validation function.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This has been broken since commit v4.0.0-165-g93412bb827 which added
jobInfo->statsType enum to distinguish various statistics types. During
migration the type will always be QEMU_DOMAIN_JOB_STATS_TYPE_MIGRATION,
however the destination code consuming the statistics data from
migration cookie failed to properly set the type. So even though
everything was filled in, the type remained *_NONE and any attempt to
fetch the statistics data of a completed migration on the destination
host failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1584071
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In commit 8bebb2b735 I've refactored how the detach of disk with a
managed persistent reservations object is handled. After the commit if
any disk with a managed PR object would be removed libvirt would also
attempt to remove the shared 'pr-manager-helper' object potentially used
by other disks.
Thankfully this should not have practical impact as qemu should reject
deletion of the object if it was still used and the rest of the code is
correct.
Fix this by removing the disk from the definition earlier and checking
if the shared/managed pr-manager-helper object is still needed.
This basically splits the detach code for the managed PR object from the
unmanaged ones. The same separation will follow for the attachment code
as well as it greatly simplifies -blockdev support for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We allocate a temporary bitmap but never free it.
Introduced by <commit 1f8a1a9>:
qemu: Do not use qemuMonitorSetMigrationCapability
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When status XML was parsed the post-parse callbacks could not access
qemu caps and potentially upgrade the definition according to the
present caps. Implement the callback to pass it in.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Trying to set any cache for <disk device='lun'/> makes no sense.
Such disk translates into -device scsi-block on the command line
and the device lacks any cache setting because it's merely a
middle man between qemu and real SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function creates a list of all (or migratable only) CPU features
supported by QEMU. It works by looking at the CPU model info returned by
query-cpu-model-expansion QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
virConnectGetDomainCapabilities needs to lookup QEMU capabilities
matching a specified binary, architecture, virt type, and machine type
while using default values when any of the parameters are not provided
by the user. Let's extract the lookup code into
virQEMUCapsCacheLookupDefault to make it reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we are overwriting @ret multiple times makes it
difficult to see what is actually happening here. Follow our
traditional pattern where @ret is initialized to -1, and set to 0
only in case we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Funny, we obtain driver caps at the beginning of the function,
but then for unknown reason access driver->caps directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are overwriting @ret a lot. It makes hard to see what is
actually going on. Use more gotos. Two functions are fixed here:
qemuDomainDetachShmemDevice() and qemuDomainDetachWatchdog().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On watchdog unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release watchdog device address,
2) call qemuDomainRemoveWatchdog() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On shmem unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release shmem device address,
2) call qemuDomainRemoveShmemDevice() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of releasing address only sometimes in
qemuDomainDetachChrDevice() let's release it whenever the device
is actually removed from the domain definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Before we generate the command line for qemu, if the domain about to
be launched desires to utilize the VM Generation ID functionality, then
handle both the regenerating the GUID value for backup recovery (restore
operation) and the startup after snapshot as both require a new GUID to
be generated to allow the guest operating system to recognize the VM
is re-executing something that has already executed before.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the query of the device objects for the vmgenid device
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than a lot of checks use a switch statement. This optimizes the
code as if one device is matched the rest will certainly not match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on, more stuff will be added so prevent the main function growing
out of control.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the text monitor was deleted this event can't be triggered.
Remove it and all the unnecessary code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop all conditional calls which have JSON variants, now that we
guarantee JSON monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu did not QAPIfy these and the design and name will most probably
change. The replacements will not be compatible. Drop the JSON stubs and
annotate that there won't be a replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no callers for these. Remove them and the monitor
implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit e4c8f004c55d9da3eae3e14 which
is included in v1.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit ab49ab5c488237f3656689 which
is included in v1.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the secure way to transport non-shared storage data across
migrations. The new approach uses blockdev-add to create the NBD client
so that the TLS secret object can be specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1300772
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate the code relevant for this approach so that we can later add a
second implementation without making the function messy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Drop the mention of 'drive mirror' from the function names and mention
NBD. This will help when adding the 'blockdev mirror' migration code
which will allow using TLS.
Additionally fix some of the function comments to make more sense
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow saving various aspects necessary to do NBD migration via blockdev
by storing a 'virStorageSource' in the disk private data meant to store
the NBD target of migration. Along with this add code to parse and
format it into the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract the NBD portion of the 'job' status XML element parser into a
separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We will be adding source data to it so extract it to a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
These helpers add infrastructure which simplifies adding and rolling
back virStorageSources to a running qemu instance. Using of the helper
structure and separate functions allows for a much cleaner code in the
section dealing with the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
drive-mirror allows only file targets. Introduce support for
blockdev-mirror that is able to copy to any BDS described by a node name
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move formatting of the qemu command out of qemuMonitorJSONMakeCommandRaw
to qemuMonitorJSONMakeCommandInternal to allow greater reusability and
document the function better.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability also represents that 'blockdev-add' is functional. It's
necessary to detect it via presence of 'blockdev-del' since blockdev-add
did not have the unsupported 'x-blockdev-add' version previously and
thus would be marked as present even if we could not use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The initiation of a synchronous block job in the NBD storage migration
code was placed after entering the monitor thus after the lock on the VM
object was unlocked. Thankfully nothing bad could happen in this
situation since the migration job prevents any disk detaches or other
modifications of the domain object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reference the storage via node name rather than inlining it. This is
the approach that will be used with -blockdev/blockdev-add since it
allows more control and is more future proof.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6
and ich9 sound devices, which only advertises a line-out in the guest.
This has been available in QEMU since 0.14.
Signed-off-by: Filip Alac <filipalac@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This way we don't rely on QEMU supplying the -sandbox option
without CONFIG_SECCOMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We currently print the libvirt and qemu version strings into the
per-guest logfile. It would be useful to know what kernel is running
too, so add that.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
