Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
virConnect.privateData is void *, so we can't access
fields of parallelsConn, pointer to which is stored in
virConnect.privateData. So replace all occurences of
conn->privateData->storageState with privconn->storageState.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Partially reverts commit 5754dbd.
The code in the specfile adds a MAC address to every <bridge>,
even for <forward mode='bridge'> for which we don't support
changing MAC addresses.
Remove it completely. For new networks, we have been adding
MAC addresses on definition/creation since the commit mentioned above.
For existing networks (pre-0.9.0), the MAC is added by this commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1156367
Since our big split of libvirt.c there are only a few functions
living there. The majority was moved to corresponding subfile,
e.g. domain functions were moved to libvirt-domain.c. However,
the patches for virDomainGetFSInfo() and virDomainFSInfoFree()
introduction were posted prior the big split and merged after.
This resulted in two domain functions landing in wrong file.
Move them to the correct one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adding non-existing nwfilter to a network interface device without any
nwfilter specified will crash libvirt daemon with segfault. The reason is
that the nwfilter is not found an libvirt will try to restore old
nwfilter configuration but there is no nwfilter specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function virNetworkObjListExport() in network_conf.c had a call to
the public API virNetworkFree() which was causing a link error:
CCLD libvirt_driver_vbox_network_impl.la
./.libs/libvirt_conf.a(libvirt_conf_la-network_conf.o): In function `virNetworkObjListExport':
/home/laine/devel/libvirt/src/conf/network_conf.c:4496: undefined reference to `virNetworkFree'
This would happen when I added
#include "network_conf.h"
into domain_conf.h, then attempted to call a new function from that
file (and enum converter, similar to virNetworkForwardTypeToString())
In the end, virNetworkFree() ends up just calling virObjectUnref(obj)
anyway (after clearing all pending errors, which we probably *don't*
want to do in the cleanup of a utility function), so this is likely
more correct than the original code as well.
Make was not able to realize the dependencies for html/*.html files when
running 'make -j9 dist'. All the files are generated together with
html/index.html, so simply separating them into another variable and
adding one block into the dependency chain solves the issue.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks. The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is a race condition between the fopen and fscanf calls
in qemuGetProcessInfo. If fopen succeeds, there is a small
possibility that the file no longer exists before reading from it.
Now, if either fopen or fscanf calls fail, the function will behave
just as only fopen had failed.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1169055
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id 'cb88d433' refactored the calling sequence to use a thread;
however, in doing so "lost" the check for if virNetSocketAccept returns
failure. Since other code makes that check, Coverity complains. Although
a false positive, adding back the failure check pacifies Coverity
Commit id '0d36a5d05' modified the code slightly, but removed the
return value check thus causing Coverity to complain that this call
was the only one where the return value wasn't checked. Since nothing
was done previously if there was a failure, just use ignore_value here
to pacify Coverity
Coverity complains that many other callers to return err from
virGetLastError() will check if err is not NULL before dereferencing
it. Just do the same here for safety.
Coverity complained that because the cfg->macFilter call checked
net->ifname != NULL before calling ebtablesRemoveForwardAllowIn, then
the virNetDevOpenvswitchRemovePort call should have the same check.
However, if I move the ebtables call prior to the check for TYPE_DIRECT
(where there is a VIR_FREE(net->ifname)), then it seems Coverity is
happy. Since firewall info is tacked on last during setup, removing
it in the opposite order of initialization seems to be natural anyway
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent. A future patch will need to
use this functionality from storage_conf
There are some small issue in qemuProcessAttach:
1.Fix virSecurityManagerGetProcessLabel always get pid = 0,
move 'vm->pid = pid' before call virSecurityManagerGetProcessLabel.
2.Use virSecurityManagerGenLabel to get image label.
3.Fix always set selinux label for other security driver label.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When a block{commit,copy} job was aborted on a domain, block job handler
did not process it correctly, leaving a phantom job in the background.
Any further calls to any blockjob causes "block <jobtype> still active"
error. This patch fixes the blockjob handler so that it checks not only
for VIR_DOMAIN_BLOCK_JOB_FAILED status, but VIR_DOMAIN_BLOCK_JOB_CANCELED
status as well, followed by our existing cleanup routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135169
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job is failed in qemuMigrationRun, we expect the jobinfo type as
FAILED. But jobinfo type won't be updated until entering
qemuMigrationWaitForCompletion. We should make it updated in all
conditions. Moreover, we can't use qemuMigrationUpdateJobStatus
here because job may fail in libvirt, so we can't query job status
from QEMU.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
The migration job status is traced in qemuMigrationUpdateJobStatus
which is called in qemuMigrationRun. But if migration is cancelled
before the trace such as in qemuMigrationDriveMirror, the jobinfo
type won't be updated to CANCELLED. After this patch, we can get
jobinfo type CANCELLED if migration is cancelled during drive
mirror. Moreover, we can't use qemuMigrationUpdateJobStatus
because from qemu's point of view it's just the drive mirror being
cancelled and the migration hasn't even started yet.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad11b (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769ba), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).
Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It looks like it was copy-pasted, so in case anyone wonders what some of
those methods do without looking at them, and for the sake of
completeness, fix them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 433b427ff8.
The patch was added in order to overcome a bug in iproute2 and since it
was properly identified as a bug, particularly in openSUSE 13.2, and it
is being worked on [1], the best solution for libvirt seems to be to
keep the old behaviour.
[1] https://bugzilla.novell.com/show_bug.cgi?id=907093
Starting from libvirt-1.2.4, network state XML files moved to another
directory (see commit b9e95491) and libvirt automatically migrates the
network state files to a new location. However, the code used
dirent.d_type which is not supported by all filesystems. Thus, when
libvirt was upgraded on a host which used such filesystem, network state
XMLs were not properly moved and running networks disappeared from
libvirt.
This patch falls back to lstat() whenever dirent.d_type is DT_UNKNOWN to
fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1167145
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 7557ddf added some additional block.* stats to
virDomainListGetStats, but failed to document them in 'man
virsh'. Also, I noticed some inconsistent use of commas.
* tools/virsh.pod (domstats): Tweak commas, add missing stats.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 6fcddfcd refactored job statistics but missed the jobinfo type updated
in qemuDomainGetJobInfo. After this patch, we can use virDomainGetJobInfo to
get jobinfo type again.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 'c264eeaa' didn't do the prerequisite 'make syntax-check' before
pushing. There was a <tab> in the whitespace for the comment. Replaced
with spaces and aligned.
pushed as build breaker since Jenkins complained loudly
The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:
<filesystem type='bind' accessmode='passthrough'>
<source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
<target dir='/var'/>
</filesystem>
In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
Due to a change (or bug?) in ip link implementation, the command
'ip link add vnet0...'
is forced into
'ip link add name vnet0...'
The changed command also works on older versions of iproute2, just the
'name' parameter has been made mandatory.
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.
To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.
For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
