Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Switch from int to double for displaying job progress upto 2 decimal
places.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemu driver now accepts also _ULLONG as type for bigger numbers. Use
the 'virTypedParamListAddUnsigned' helper to use the bigger typed
parameter type if necessary to allow full range of the values while
preserving compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor to use the new data type so that we can use the APIs of it in
upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove some obvious uses of VIR_FREE in favor of automatic cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virsh, we have this convenient domif-setlink command, which is
just a wrapper over virDomainUpdateDeviceFlags() and which allows
setting link state of given guest NIC. It does so by fetching
corresponding <interface/> XML snippet and either putting <link
state=''/> into it, OR if the element already exists setting the
attribute to desired value. The XML is then fed into the update
API.
There's, however, a small bug in detecting the pre-existence of
the element and its attribute. The code looks at "link"
attribute, while in fact, the attribute is called "state".
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/426
Fixes: e575bf082e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return value of virXMLPropString was assigned into 'tmp' multiple
times and to prevent static analyzers moaning about a potential leak a
short-circuited if logic or was used.
Replace the code by having a helper variable for each possibility and
also replace the for-loop to iterate elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XPath lookup guarantees that the top level element is always 'disk'
so there's no need to check that it actually is. We can also remove the
two unnecessary temporary variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing for the 'disk_node' variable and remove
the 'cleanup' label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing for the 'disk_node' variable and remove
the 'cleanup' label and 'functionReturn' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
'cmdQemuMonitorCommandQMPWrap' is checking whether the user provided
string is not valid JSON to avoid wrapping it. In cases where it's not
JSON we ignore the error and add the wrapper.
If the caller then reports a different non-libvirt error the error from
the JSON parsing would be printed as well. Reset errors we ignore:
# virsh qemu-monitor-command cd --pass-fds a asdf
error: Unable to parse FD number 'a'
error: internal error: cannot parse json asdf: lexical error: invalid char in json text.
asdf
(right here) ------^
In the above case 'asdf' is not valid JSON, but the code did wrap it
into '{"execute":"asdf"}', the only problem is the argument for
--pass-fds.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Historically, the dumpxml command reject any unknown arguments,
for instance:
virsh dumpxml fedora xxx
However, after v8.5.0-rc1~31 the second argument ('xxx') is
treated as an XPath, but it's not that clearly visible.
Therefore, require the --xpath switch, like this:
virsh dumpxml fedora --xpath xxx
Yes, this breaks already released virsh, but I think we can argue
that the pool of users of this particular function is very small.
We also document the argument being mandatory:
dumpxml [--inactive] [--security-info] [--update-cpu] [--migratable]
[--xpath EXPRESSION] [--wrap] domain
The sooner we do this change, the better.
The same applies for other *dumpxml functions (net-dumpxml,
pool-dumpxml, vol-dumpxl to name a few).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2103524
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our man page already documents that iothreadset has --config
argument. Well, it doesn't really. Normally, I'd just fix the man
page, but with recent work on the API it's possible to tweak
values for inactive XML too. Therefore, implement the --config
argument for the command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.
$ virsh pool-dumpxml --xpath //permissions default
<permissions>
<mode>0711</mode>
<owner>1000</owner>
<group>1000</group>
<label>unconfined_u:object_r:svirt_home_t:s0</label>
</permissions>
If multiple nodes match, they are emitted individually:
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
but if intending to post-process the output further, the results
can be wrapped in a parent node
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<nodes>
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
</nodes>
Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since virsh implements a wrapper over virDomainSetIOThreadParams()
(command iothreadset) let's wire up new typed parameters there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Virsh has iothreadset command which allows setting various
attributes of IOThreads. However, when the command is called
without any arguments (besides domain and IOThread IDs), then
@params stays NULL and is passed to virDomainSetIOThreadParams()
which produces rather user unfriendly error message:
error: params in virDomainSetIOThreadParams must not be NULL
Introduce a check and produce better error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This implementation reports only Unix bus address using the URI format
proposed in https://gitlab.freedesktop.org/dbus/dbus/-/issues/348.
We prefer a URI form over the D-Bus address form, since all other
display protocols use a URI, allowing to distinguish between protocols
and making client implementation simpler.
Other transports (for example TCP) are not yet handled.
The client is assumed to know what to lookup on the bus (the bus name,
path & interface of the VM, eventually matching its UUID)
P2P mode doesn't report any available URI.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a recent commit I've attempted to rewrite the XML generator to use
virXMLFormatElement instead of manual steps. Unfortunately the commit
had multiple problems resulting in a garbled XML:
1) in certain cases the wrong buffer was used resulting in misplaced
snippets
2) the child element buffer was improperly set up so sub-elements were
not indented
This resulted in following XML being generated:
$ virsh blockcopy cd vda /tmp/test.copy --raw --print-xml
type='file''/tmp/test.copy'/>
<driver type='raw'/>
<disk>
<source file=</disk>
To fix this we'll generate the '<source>' element in one go and use the
proper buffer for it and other places.
Fixes: 1cd95f858a
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2078274
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Useful for knowing how to construct the XML and debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the use of the '-desc' multiple argument parameter was not
forbidden toghether with '-edit', but use of both together has some
unexpected behaviour. Specifically the editor is filled with the
contents passed via '-desc' but if the user doesn't change the text in
any way virsh will claim that the description was not chaged even if it
differs from the currently set description. Similarly, when the user
would edit the description provided via 'desc' so that it's identical
with the one configured for the domain, virsh would claim that it was
updated:
# virsh desc cd
No description for domain: cd
# EDITOR=true virsh desc cd --edit "test desc"
Domain description not changed
After the fix:
# virsh desc cd
No description for domain: cd
# EDITOR=true virsh desc cd --edit "test desc"
Domain description updated successfully
# EDITOR=true virsh desc cd --edit "test desc"
Domain description not changed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The getters have a different set of flags. Add a variable for the getter
to avoid having to construct flags when calling the getter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of having two ad-hoc places which decide whether the original
flags can be used add another variable specifically for flags used for
query.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unconditionally format the start of the query ('?') and make delimiters
('&') part of the arguments. At the end we can trim off 1 char from the
end of the buffer unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary variables holding the
data extracted from the XML.
The code in this function was originally extracted from a loop so we can
also drop pre-clearing of the pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the code so that the function is not as massive. Note that this
is a minimal extraction which does not clean up the code meant for
looping.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'cmdEvent' along with all the helper functions it needs is ~950 LOC.
Move it out from virsh-domain.c to virsh-domain-event.c along with the
completer function so that the new module doesn't have to expose any new
types.
Semantically this creates a new category in 'virsh help' but all other
behaviour stays the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
