Commit Graph

135 Commits

Author SHA1 Message Date
Eric Blake
5a3ec56ba3 spicevmc: support older -device spicevmc of qemu 0.13.0
qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.
2011-02-04 09:17:01 -07:00
Eric Blake
7a2f29e4f9 smartcard: check for qemu capability
Qemu smartcard/spicevmc support exists on branches (such as
http://cgit.freedesktop.org/~alon/qemu/commit/?h=usb_ccid.v15&id=024a37b)
but is not yet upstream.  The added -help output matches a scratch build
that will be close to the RHEL 6.1 qemu-kvm.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_CCID_EMULATED)
(QEMUD_CMD_FLAG_CCID_PASSTHRU, QEMUD_CMD_FLAG_CHARDEV_SPICEVMC):
New flags.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags)
(qemuCapsParseDeviceStr): Check for smartcard capabilities.
(qemuCapsExtractVersionInfo): Tweak comment.
* tests/qemuhelptest.c (mymain): New test.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device: Likewise.
2011-02-03 19:28:53 -07:00
Matthias Dahl
f19357ce37 qemu aio: parse aio support from qemu -help
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-01-28 09:09:49 -07:00
Eric Blake
f892f5a562 qemu: improve device flag parsing
* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.
2011-01-13 16:03:11 -07:00
Eric Blake
abff0290b1 qemu: add -incoming fd:n capability checking
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_MIGRATE_QEMU_FD):
New enum value.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Populate
flags according to qemu version.
* tests/qemuhelptest.c (mymain): Adjust test.
2010-12-23 16:33:39 -07:00
Daniel P. Berrange
1d16f05674 Update QEMU test cases for new file locations & API renames
* qemuargv2xmltest.c, qemuhelptest.c,
  qemuxml2argvtest.c, testutilsqemu.c: Update includes and
  cope with API renames
2010-12-17 16:41:51 +00:00
Eric Blake
e414dab4d6 tests: test Fedora 14 qemu-kvm -help parsing
* tests/qemuhelpdata/qemu-kvm-0.13.0: New file.
* tests/qemuhelptest.c (mymain): New test from Fedora 14 qemu-kvm,
which covers some options (like -fstype passthrough) not tested elsewhere.
2010-12-13 16:30:02 -07:00
Eric Blake
d5a710eec1 tests: test RHEL 6.0 qemu-kvm -help parsing
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60: New file.
* tests/qemuhelptest.c (mymain): New test from RHEL 6.0 qemu-kvm,
which covers some options (like -vga=qxl) not tested elsewhere.
* .x-sc_prohibit_empty_lines_at_EOF: Exempt qemu help output.
2010-12-13 16:30:02 -07:00
Jiri Denemark
2cfb107905 qemu: Use -vga none only if it is supported
Commit febc591683 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.
2010-12-08 16:45:10 +01:00
Daniel P. Berrange
ff2bb29ca9 Misc test case fixes for SPICE
* docs/schemas/domain.rng: Fix merge error which left SPICE channel
  elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
  <memballoon> element
2010-11-09 13:52:20 +00:00
Daniel Veillard
54c0237ccb Add sysinfo/smbios support to the QEmu driver
The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.

* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
  value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
  and if available add support based on the domain definitions,
  and host data
* tests/qemuhelptest.c: add the new enum in the outputs
2010-11-08 15:14:50 +01:00
Jiri Denemark
69b7552154 qemu: Fix detection of drive readonly option
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
2010-10-26 10:31:50 +02:00
John Morrissey
c08c7b0143 Add process= support for 'qemu-kvm -name'
This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
  QEmu help output, add the option in qemu conf file and augment
  qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
  the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now
2010-10-20 10:30:30 +02:00
Daniel P. Berrange
f98a6cd6ae Enable support for nested SVM
This enables support for nested SVM using the regular CPU
model/features block. If the CPU model or features include
'svm', then the '-enable-nesting' flag will be added to the
QEMU command line. Latest out of tree patches for nested
'vmx', no longer require the '-enable-nesting' flag. They
instead just look at the cpu features. Several of the models
already include svm support, but QEMU was just masking out
the svm bit silently. So this will enable SVM on such
models

* src/qemu/qemu_conf.h: flag for -enable-nesting
* src/qemu/qemu_conf.c: Use -enable-nesting if VMX or SVM are in
  the CPUID
* src/cpu/cpu.h, src/cpu/cpu.c: API to check for a named feature
* src/cpu/cpu_x86.c: x86 impl of feature check
* src/libvirt_private.syms: Add cpuHasFeature
* src/qemuhelptest.c: Add nesting flag where required
2010-10-13 16:45:31 +01:00
Cole Robinson
4f24ca01e8 qemu: Allow setting boot menu on/off
Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
2010-07-27 16:38:32 -04:00
Eric Blake
f30ccb2458 qemu_conf: fix flag value
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
2010-05-17 16:28:02 -06:00
Laine Stump
0fdf649672 Add flags to indicate presence of timekeeping-related qemu options
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
2010-03-30 13:57:40 +02:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Daniel P. Berrange
200c83b29d Support variable clock offset mode in QEMU
This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.
2010-03-01 18:41:40 +00:00
Cole Robinson
a09af3b004 qemu: Report binary path if error parsing -help 2010-02-25 11:43:57 -05:00
Daniel P. Berrange
910b019f93 Convert qemu command line flags to 64-bit int
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags
2010-02-10 12:09:41 +00:00
Jiri Denemark
5d462bd0b3 Implement CPU topology support for QEMU driver
QEMU's command line equivalent for the following domain XML fragment
    <vcpus>2</vcpus>
    <cpu ...>
        ...
        <topology sockets='1' cores='2', threads='1'/>
    </cpu>

is

    -smp 2,sockets=1,cores=2,threads=1

This syntax was introduced in QEMU-0.12.

Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing

Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 11:40:09 +01:00
Daniel P. Berrange
4f6c999006 Add support for explicit -sdl flag to QEMU
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
  flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
1ed1bf3a38 Probe for -device and use -nodefaults
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
2010-01-18 13:39:14 +00:00
Adam Litke
7a90f21655 qemu: Always enable the virtio balloon driver
The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
2010-01-06 18:01:51 +01:00
Steve Yarmie
b827338a72 qemu-kvm needs -enable-kvm flag for VT optimization
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests
2009-11-20 15:41:05 +01:00
Daniel P. Berrange
58355a5bfb Move QEMU driver to src/qemu/
* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths
2009-09-21 14:41:43 +01:00
Mark McLoughlin
110abb0343 Add qemu -help test data for qemu-kvm-0.11.0-rc2
* tests/qemuhelpdata/qemu-kvm-0.11.0-rc2: add data

* tests/qemuhelptest.c: add expected output
2009-09-10 12:37:35 +01:00
Daniel P. Berrange
85d15b5143 Add support for setting disk drive serial numbers
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
  formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
  serial number to XML test
2009-09-03 13:53:34 +01:00
Daniel P. Berrange
d823a05aef Support configuration of huge pages in guests
Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests
2009-09-03 13:51:55 +01:00
Mark McLoughlin
d4528d9ac2 Detect KVM's PCI device assignment support
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.

* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
  that the -pcidevice command line option is available

* tests/*: update the tests
2009-08-14 08:31:11 +01:00
Mark McLoughlin
948897687e Add checks for some NIC hotplug related features added in qemu-0.10.0
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.

Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.

* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10

* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0

* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
  qemu versions
2009-07-22 11:34:06 +01:00
Daniel P. Berrange
ad6d5acb42 Support <video> element for QEMU guests
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
2009-07-08 13:40:32 +01:00
Cole Robinson
659bd66529 Check that '-drive format=' is supported before adding to qemu cmdline.
Qemu < 0.10.0 did not support it, and virt-* tools now try to add this by
default, so it's extra important we ensure the option exists.
2009-06-16 15:17:10 +00:00
Mark McLoughlin
1fbe229b3c Add qemu help string parsing tests
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-11 14:17:42 +00:00