Commit Graph

635 Commits

Author SHA1 Message Date
Eric Blake
2b4d8deb6b snapshot: improve virsh snapshot-create, add snapshot-edit
Wire up the new snapshot creation flags in virsh.  For convenience,
teach 'snapshot-current' how to make an existing snapshot become
current (can be used after upgrading to newer libvirt to recover
from the fact that the older libvirt lost track of the current
snapshot after a restart).  The snapshot-create-as command is
intentionally not taught --redefine or --current, as this would
imply adding a lot of other options for everything else that can
appear in the <domainsnapshot> xml, but which is normally read-only.
Besides, redefining will usually be done on files created by
snapshot-dumpxml, rather than something built up by hand on the
command line.  And now that we can redefine, we can edit.

* tools/virsh.c (cmdSnapshotCreate): Add --redefine, --current,
and --no-metadata.
(cmdSnapshotCreateAs): Add --no-metadata.
(cmdSnapshotCurrent): Add snapshotname to alter current snapshot.
(cmdSnapshotEdit): New command.
* tools/virsh.pod (snapshot-create, snapshot-create-as)
(snapshot-current, snapshot-edit):  Document these.
2011-09-02 21:57:32 -06:00
Eric Blake
22a833e789 snapshot: reflect new dumpxml and list options in virsh
New flag bits are worth exposing via virsh.  In the case of
snapshot-list --roots, it's possible to emulate this even when
talking to an older server that lacks the bit; whereas
--metadata requires a newer server.

Although we don't use --security-info yet, the flag is already
documented for other dumpxml operations, and turning it on now
will make it useful when a future patch actually has to honor it.

* tools/virsh.c (cmdSnapshotDumpXML, cmdSnapshotCurrent): Add
--security-info.
(cmdSnapshotList): Add --roots, --metadata.
* tools/virsh.pod (snapshot-dumpxml, snapshot-current)
(snapshot-list): Document these.
2011-09-02 17:07:36 -06:00
Eric Blake
d4a965c6a8 snapshot: add snapshot-list --parent to virsh
Even though I recently added 'virsh snapshot-parent', doing it one
snapshot at a time is painful, so make it possible to expand the
snapshot-list table at once.

* tools/virsh.c (cmdSnapshotList): Add --parent.
* tools/virsh.pod (snapshot-list): Document it.
2011-09-02 15:52:06 -06:00
Eric Blake
42c52d53c3 snapshot: expose --running and --paused in virsh
Pretty straight-forward exposure of new flags.  For most commands,
we let the API reject mutually exclusive flags; but for save-image-edit,
we do the sanity check ourselves to avoid looping on flag failure if
the edit cycle is ever enhanced to allow the user to retry an edit
to fix up an xml validation error.

* tools/virsh.c (cmdManagedSave, cmdRestore, cmdSave)
(cmdSaveImageDefine, cmdSaveImageEdit): Add new flags.
* tools/virsh.pod (managedsave, restore, save, save-image-define)
(save-image-edit): Document them.
2011-09-02 10:00:06 -06:00
Osier Yang
6ee52c1b76 Add directsync cache mode support for disk driver
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
    As even $prefix_CACHE_V2 is set, we can't known if directsync
    is supported.
2011-09-02 21:36:58 +08:00
Osier Yang
ddcd5674aa storage: Add virsh support for fs pool formating 2011-09-02 21:17:08 +08:00
Eric Blake
c2d4b4f704 virsh: improve send-key documentation
The 'virsh man' description of send-key was incomplete and used the
old style (literal 'optional name' instead of '[name]' metasyntax).
Meanwhile, none of the other virsh help texts include examples, so
I moved it out of virsh help and into the man page.

* tools/virsh.pod (send-key): Give better details.
* tools/virsh.c (info_send_key): Drop example from here.
2011-09-01 12:47:24 -06:00
Jim Fehlig
1282bd80f7 virsh: Expose virDomainMigrateGetMaxSpeed API 2011-09-01 11:26:21 -06:00
Eric Blake
27c8526053 start: allow discarding managed save
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things.  Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
2011-08-30 09:26:47 -06:00
Taku Izumi
5f57c48528 schedinfo: update man page about virsh schedinfo command
This patch updates the man page about virsh schedinfo command.

 - fix typo: 1844674407370955 -> 18446744073709551
 - describe the value 0 of vcpu_period and vcpu_quota parameters

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-08-26 09:50:43 -06:00
Jiri Denemark
7ac78e3237 virsh: Clarify documentation of -d option
The default is 4, not 0.
2011-08-26 11:52:54 +02:00
Eric Blake
131540277e virsh: add list --managed-save
Knowing whether 'virsh start' will resume a saved image or do
a fresh boot is useful enough to expose via 'virsh list'.

Also, translate the state column.

* tools/virsh.c (cmdList): add --managed-save flag
* tools/virsh.pod (list): Document it.
Based on a suggestion by Miklos Vajna.
2011-08-24 08:34:49 -06:00
Taku Izumi
4dec4d414f schedinfo: add missing documentation
This patch adds the missing documentation about the scheduler parameter
"vcpu_period" and "vcpu_quota".
2011-08-19 16:53:22 +08:00
Eric Blake
531c858131 virsh: concatenate qemu-monitor-command arguments
Call me lazy, but:

virsh qemu-monitor-command dom --hmp info status

is nicer than:

virsh qemu-monitor-command dom --hmp 'info status'

* tools/virsh.c (cmdQemuMonitorCommand): Allow multiple arguments,
for convenience.
2011-08-17 07:45:32 -06:00
Eric Blake
98369d314b virsh: add snapshot-parent
Down the road, I want to add virDomainSnapshotGetParent, and use
the new API rather than xml scraping; but this virsh command can
be implemented even without the new API.

* tools/virsh.c (cmdSnapshotParent): New command.
* tools/virsh.pod (snapshot-parent): Document it.
2011-08-11 13:18:24 -06:00
Eric Blake
23b4a3f95b virsh: add virsh snapshot-current --name
Sometimes, full XML is too much; since most snapshot commands
operate on a snapshot name, there should be an easy way to get
at the current snapshot's name.  For example:

virsh snapshot-revert dom `virsh snapshot-current dom --name`

* tools/virsh.c (cmdSnapshotCurrent): Add an option.
* tools/virsh.pod (snapshot-current): Document it.
2011-08-10 21:59:56 -06:00
Alex Jia
df97107787 doc: fix incorrect option in blockjob
* tools/virsh.pod: change 'live' to 'abort' based on actual option
2011-08-02 15:05:05 +08:00
Eric Blake
0d0bf8507c virsh: expose change-protection during migration
* tools/virsh.c (doMigrate): Add --change-protection flag.
* tools/virsh.pod (migrate): Document it.
2011-07-27 15:19:32 -06:00
Osier Yang
5c77d18b1b doc: Add doc for blockpull and blockjob commands
Commit b31abc6f0 introduce commands blockpull and blockjob, but
forgot to add the docs meanwhile.
2011-07-27 10:48:28 +08:00
Dave Allan
93fb3acc8d Fix incorrect implication about list options
The description of the list command seemed to suggest that it could
take a set of domains as an argument, which is not correct in the
current HEAD.  If virsh list is intended to take a list of domains,
then this patch should be NAK'd and a bug opened against virsh list.

Reported by hachi on #virt

v2:

Change language to include transient domains

Osier pointed out that transient domains are not defined, so what I
had originally proposed wasn't quite correct.
2011-07-26 09:28:41 -06:00
Daniel P. Berrange
a4b4b6aa30 Fix typos in virsh.pod file
* tools/virsh.pod: Fix missing > tag in docs
2011-07-26 14:51:03 +01:00
Eric Blake
4b7a8e9c0d virsh: make vcpucount use --current consistently
Rename the existing --current flag to the new name --active,
while adding a new flag --current to expose the new
VIR_DOMAIN_AFFECT_CURRENT flag of virDomainGetVcpusFlags.

For backwards compability, the output does not change (even
though the label "current" no longer matches the spelling of
the option that would trigger that number in isolation), and
we accept "--current --live" as an undocumented synonym for
"--active --live" to avoid breaking any existing clients.

* tools/virsh.c (cmdVcpucount): Add --active flag, and rearrange
existing flag handling to expose VIR_DOMAIN_AFFECT_CURRENT support.
* tools/virsh.pod (vcpucount): Document this.
2011-07-25 15:51:22 -06:00
Eric Blake
bfb485ced2 save: add virsh commands for manipulating save files
Now you can edit a saved state file even if you forgot to grab
a dumpxml file prior to saving a domain.  Plus, in-place editing
feels so much nicer.

* tools/virsh.c (cmdSaveImageDumpxml, cmdSaveImageDefine)
(cmdSaveImageEdit): New commands.
* tools/virsh.pod (save-image-dumpxml, save-image-define)
(save-image-edit): Document them.
2011-07-21 17:19:56 -06:00
Eric Blake
38149ec145 save: support --xml to virsh save/restore
Also, migrate was missing documentation for the --xml option
added in commit ec5301cb.

* tools/virsh.c (cmdSave, cmdRestore): Add xml argument.
* tools/virsh.pod (save, restore, migrate): Document it.
2011-07-21 16:24:08 -06:00
Eric Blake
a779d2ff2d save: add --bypass-cache flag to virsh save/restore operations
Wire up the new flag to several virsh commands.  Also, the
'dump' command had undocumented flags.

* tools/virsh.c (cmdSave, cmdManagedSave, cmdDump, cmdStart)
(cmdRestore): Add new flag.
* tools/virsh.pod (save, managedsave, dump, start, restore):
Document flags.
2011-07-21 16:24:08 -06:00
Lai Jiangshan
7818b7ef85 send-key: Expose the new API in virsh
Also support string names for the linux keycode(auto detect)
* tools/virsh.c: add new command "send-key"
* tools/virsh.pod: documents the new command
2011-07-21 15:58:31 +08:00
Osier Yang
83e849c197 undefine: Extend virsh undefine to support the new flag
If the domain has managed save image, and --managed-save is
not specified, then it fails with an error telling the user
that a managed save image still exists.

If the domain has managed save image, and --managed-save is
specified, it invokes virDomainUndefineFlags. If
virDomainUndefineFlags fails, then it tries to remove the managed
save image using virDomainManagedSaveRemove first, with
invoking virDomainUndefine following. (For compatibility between
new virsh with this patch and older libvirt without this patch).

Similarly if the domain has no managed save image. See the codes for
detail.

NOTE: Have not removing the codes checking if the domain is running
in function "cmdUndefine", it will go along with qemu driver's fix
(allow to undefine a running domain).
2011-07-20 11:12:46 +08:00
Eric Blake
74594c57f1 Revert "virsh: make migrate --tunnelled imply --p2p"
This reverts commit 40143fb697.

The patch prevents future compatibility if migration ever learns
how to do tunnelled without p2p.
2011-07-19 07:14:43 -06:00
Osier Yang
73d4625a04 virsh: Extend virsh dominfo to display if managed save image exists
* tools/virsh.c: new column "Managed save" for "cmdDominfo".
* tools/virsh.pod: Update document of "managedsave" to tell one can
  use "dominfo" to query whether a domain has any managed save image.
2011-07-19 14:24:57 +08:00
Osier Yang
dde5681356 doc: Correct documents for iface commands
The problems:
    * Duplicate documents for "iface-name"
    * Lacks of document for "iface-mac"
    * Inconsistent option names with virsh help strings.
2011-07-19 11:19:25 +08:00
Eric Blake
40143fb697 virsh: make migrate --tunnelled imply --p2p
We can make the virsh migrate UI friendlier by supplying the
missing bit automatically instead of erroring out when requesting
--tunnelled without --p2p.

* tools/virsh.c (doMigrate): Make --p2p optional when using
--tunnelled.
* tools/virsh.pod (migrate): Tweak wording accordingly.
2011-07-18 15:19:55 -06:00
Eric Blake
08d3b0a2f8 docs: improve virsh man page synopses
"optional" is not a very good meta-syntactic construct in our man
page.  I scrubbed this, and additionally improved some documentation
on mutually exclusive options.  For example,

[[--live] [--config] | [--current]]

implies a set of optional flags, where within the set you can have
either --current or a choice of 0, 1, or both --live and --config.

* tools/virsh.pod: Use "[name]" rather than "optional name" for
optional arguments.
2011-07-18 11:19:40 -06:00
Hu Tao
e962a57994 add --cache, --serial, --shareable and --address to attach-disk
This adds four options for virsh command attach-disk.

--cache option allows user to specify cache mode of disk device
from virsh command line when attaching a disk device.

--serial option allows user to specify serial string of disk device
from virsh command line when attaching a disk device.

--shareable option allows user to specify whether the disk device is
shareable between domains when attaching a disk device from virsh
command line.

--address option allows user to specify address of disk device when
attaching a disk device.
2011-07-15 12:14:36 -06:00
Taku Izumi
3807d552c7 setvcpus: add "--current" option to "virsh setvcpus"
This patch adds the --current option to "virsh setvcpus"
command. Currently "virsh setvcpus" command supports
"--live" and "--config" , but "--current" option.
From view of consistency, it's reasonable to support
"--current" option too.

When --current is specified, it affects a "current"
domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-07-15 08:19:24 -06:00
Supriya Kannery
c444721b9d virsh: Update virsh man page
Valid loglevel range for virsh  is 0-4. Update virsh man page
accordingly. Also explain virsh ENV variables and values.

Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
2011-07-14 07:25:24 -06:00
Daniel P. Berrange
eb7be6a606 Add a new 'virsh qemu-attach' command.
This command allows libvirt to attach to an existing QEMU
instance.

 $ qemu-kvm -cdrom ~/demo.iso \
     -monitor unix:/tmp/demo,server,nowait \
     -name foo \
     -uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea  &
 $ QEMUPID=$!
 $ virsh qemu-attach $QEMUPID
2011-07-12 15:39:03 +01:00
KAMEZAWA Hiroyuki
2851d37855 Fix virsh inject-nmi man page
* tools/virsh.pod: move the description which was misplaced
2011-07-12 17:40:16 +08:00
Eric Blake
085d241531 virsh: make destroy sound less scary
Destroy has a rather negative English connotation.  Try to reduce
the impact, so newbies aren't as scared to use it.

* tools/virsh.c: Tweak all destroy documentation.
* tools/virsh.pod: Likewise.
2011-07-07 13:12:50 -06:00
Taku Izumi
e0858026a2 vcpupin: add query option to virsh vcpupin command
This patch teaches "virsh vcpupin" command to query if no list
is given. Its feature is to show CPU affinity information in more
reader-friendly way.

 # virsh vcpupin VM --config
 VCPU: CPU Affinity
 ----------------------------------
    0: 1-6,9-20
    1: 10
    2: 5,9-11,15-20
    3: 1,3,5,7,9,11,13,15

When cpulist is omitted, vcpu number is optional. When vcpu number is
provided, information of only specified vcpu is displayed.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-06-24 17:00:22 -06:00
Eric Blake
f7f5e3e806 Revert "Enable the virDomainBlockPull API in virsh"
This reverts commit 3e2493ce28.
2011-06-24 08:41:24 -06:00
Daniel P. Berrange
3ba937da42 Allow automatic kill of guests when a connection is closed
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.

* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
  upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
  commands
2011-06-24 12:15:10 +01:00
Eric Blake
9256ad84fc virsh: enhance snapshot-create-as
Similar to pool-create-as.

* tools/virsh.c (cmdSnapshotCreateAs): Add --print-xml.
* tools/virsh.pod: Document it.
2011-06-20 10:44:08 -06:00
Eric Blake
1546dcf866 virsh: add snapshot-create-as command
Producing an xml file just for name and description fields is
overkill; this makes life easier from virsh.

* tools/virsh.c (cmdSnapshotCreateAs): New command.
(snapshotCmds): Install it.
* tools/virsh.pod: Document it.
2011-06-20 10:44:06 -06:00
Eric Blake
ea71d82816 virsh: clarify snapshot vs. save
* tools/virsh.c (info_snapshot_create, info_save): Clarify
description.
* tools/virsh.pod (save): Likewise.
2011-06-20 10:05:27 -06:00
Taku Izumi
c4a8ca71b1 vcpupin: add reset option to virsh vcpupin command
When resetting vcpupin setting, we have to specify all host physical
cpus as a cpulist parameter of virsh vcpupin command. It's a little
tedious.

This patch changes to allow to receive the special keyword 'r' as a cpulist
parameter of virsh vcpupin command when resetting vcpupin setting.

If you set the following:

 # virsh vcpupin VM 0 r

the vcpu0 will be pinned to all physical cpus.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-20 18:14:54 +08:00
Taku Izumi
2903534a30 vcpupin: improve vcpupin definition of virsh vcpupin
When using vcpupin command, we have to speficy comma-separated list as cpulist,
but this is tedious in case the number of phsycal cpus is large.
This patch improves this by introducing special markup "-" and "^" which are
similar to XML schema of "cpuset" attribute.

The example:

 # virsh vcpupin Guest 0 0-15,^8

 is identical to

 # virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15

NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical
to "^8,0-15".

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-20 18:14:54 +08:00
Hu Tao
1bb414af27 Add new parameters for blkiotune
Add --config, --live and --current for command blkiotune
2011-06-20 15:52:11 +08:00
Jiri Denemark
5f1bbecb7d virsh: Add support for virDomainGetControlInfo 2011-06-16 19:13:08 +02:00
Adam Litke
3e2493ce28 Enable the virDomainBlockPull API in virsh
Define two new virsh commands:
 * blockpull: Perform block pull operations (incremental plus start
              and stop continuous streams)
 * blockpullinfo: Retrieve progress info for continuous block pull

Share print_job_progress() with the migration code.

* tools/virsh.c: implement the new commands

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-06-14 22:28:45 -06:00
Minoru Usui
64609328e0 virNodeGetMemoryStats: Implement virsh support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 16:36:13 -06:00
Minoru Usui
7e6cb82d1c virNodeGetCPUStats: Implement virsh support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 15:32:37 -06:00
Taku Izumi
9a3404ed71 vcpupin: add the new option to "virsh vcpupin" command
This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.
2011-06-13 23:51:04 +08:00
Osier Yang
b73f1f8d5c virsh: Expose virDomainMigrateSetMaxSpeed API to virsh
API virDomainMigrateSetMaxSpeed was introduced since 0.9.0, but
no command in virsh yet.
2011-06-08 10:40:57 +08:00
Jiri Denemark
4e3a1c3021 virsh: Document nodeinfo output 2011-06-03 19:57:04 +02:00
Eric Blake
72519f7331 docs: document iface-* commands
I intentionally set things up so 'virsh help interface' lists
commands in alphabetical order, but 'man virsh' lists them in
topical order; this matches our practice on some other commands.

* tools/virsh.pod: Document all iface commands.
* tools/virsh.c (ifaceCmds): Sort.
2011-06-02 13:29:12 -06:00
Michal Privoznik
3ef7350c42 screenshot: Expose the new API in virsh
* tools/virsh.c: Add screenshot command
* tools/virsh.pod: Document new command
* src/libvirt.c: Fix off-be-one error
2011-06-02 14:57:00 +02:00
Hu Tao
118eac373d Add new flags for setting memory parameters
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command

* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
2011-05-27 15:35:11 +08:00
Hu Tao
42af244347 virsh: add parameters --live, --config and --current to cmd schedinfo
This enables user to modify cpu.shares even when domain is inactive.
2011-05-17 10:52:16 -06:00
Jiri Denemark
0eaf4d93be virsh: Prefer virDomainGetState over virDomainGetInfo 2011-05-16 10:04:19 +02:00
Lai Jiangshan
a083d44c87 inject-nmi: Expose the new API in virsh 2011-05-10 11:40:51 -06:00
Eric Blake
0ddc8d0aeb docs: document freecell --all
Based on a smaller patch developed by Moritoshi Oshiro:
https://bugzilla.redhat.com/show_bug.cgi?id=693963

* tools/virsh.pod (freecell): Mention all, and clarify that
optional cellno requires --cellno.
2011-04-11 08:32:37 -06:00
Taku Izumi
0ad06c1116 setmaxmem: add the new options to "virsh setmaxmem" command
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem".  When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-08 20:22:12 -06:00
Eric Blake
5bc22e129b docs: tweak virsh restore warning
* tools/virsh.pod: Fix grammar, and clarify wording.
* src/qemu/qemu_driver.c (qemudDomainObjStart): Drop redundant
condition.
2011-04-08 07:58:07 -06:00
Taku Izumi
80427f1d87 setmem: add --current option to virsh setmem command
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-07 17:19:46 -06:00
Osier Yang
a73bbfc8be qemu: Remove the managed state file only if restoring succeeded
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").

The fix for is to unlink the managed state file only if restoring
succeeded.

2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.

3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
2011-04-07 16:58:26 +08:00
Jiri Denemark
1e8f20799c virsh: Fix documentation for memtune command
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
2011-04-01 11:31:10 +02:00
Daniel P. Berrange
6299ca71c4 Add vol-upload and vol-download commands to virsh
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.

* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
2011-03-29 12:17:38 +01:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Gui Jianfeng
17e7556dcf virsh: Adding blkiotune command to virsh tool
Adding blkiotune command to virsh tool

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-03-10 17:54:08 -07:00
Taku Izumi
2d70a46911 setmem: add the new options to "virsh setmem" command
This patch adds the new options (--live and --config)  to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-03-10 15:02:58 -07:00
Eric Blake
c82be0530e sysinfo: implement virsh support
* tools/virsh.c (cmdSysinfo): New function.
(hostAndHypervisorCmds): Add it.
* tools/virsh.pod: Document it.
2011-02-08 19:29:48 -07:00
Jiri Denemark
2169472ab6 qemu: Add shortcut for HMP pass through
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:

    virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'

which is not a very convenient way of debugging qemu.

This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just

    virsh qemu-monitor-command --hmp DOM "info kvm"

Also the result is converted from

    {"return":"kvm support: enabled\r\n"}

to just plain HMP:

    kvm support: enabled

If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
2011-02-03 22:20:30 +01:00
Osier Yang
8168285b45 docs: Update docs for cpu_shares setting
* tools/virsh.pod
2011-02-01 16:46:17 +08:00
Matthias Bolte
d9ad8ac392 Add VIR_DIV_UP to divide memory or storage request sizes with round up
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e0406c
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
2011-01-29 00:42:10 +01:00
Wen Congyang
f15cad2916 Force guest suspend at timeout
If the memory of guest OS is changed constantly, the live migration
can not be ended ever for ever.

We can use the command 'virsh migrate-setmaxdowntime' to control the
live migration. But the value of maxdowntime is diffcult to calculate
because it depends on the transfer speed of network and constantly
changing memroy size. We need a easy way to control the live migration.

This patch adds the support of forcing guest to suspend at timeout.
With this patch, when we migrate the guest OS, we can specify a
timeout. If the live migration timeouts, auto-suspend the guest OS,
where the migration will complete offline.
2011-01-27 15:30:42 -07:00
Wen Congyang
d183e9d1e8 Show migration progress.
Show migration progress if `migrate --verbose'.
2011-01-27 15:29:24 -07:00
Justin Clift
4282efcc76 docs: expand the man page text for virsh setmaxmem
Addresses BZ # 622534:

  https://bugzilla.redhat.com/show_bug.cgi?id=622534
2011-01-28 03:32:23 +11:00
Justin Clift
6014485cdb docs: fix incorrect XML element mentioned by setmem text 2011-01-27 22:57:18 +11:00
Justin Clift
efc892ad6f docs: clarify virsh setvcpus and setmem usage with active domains
Addresses BZ # 622534:

  https://bugzilla.redhat.com/show_bug.cgi?id=622534
2011-01-14 07:48:43 +11:00
Wen Congyang
2fd1a2525b doc: improve the documentation of desturi
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-01-12 09:52:51 -07:00
Jiri Denemark
0fdd82e66e virsh: Add --force option to update-device 2010-12-23 09:07:17 +01:00
Justin Clift
4fa617e6eb man pages: update the description for the virsh help command
Now includes information on keyword usage, and provides examples.
2010-12-03 17:54:16 +11:00
Justin Clift
257cc1a1b3 docs: removed outdated reference to virt-mem
The virt-mem program is no longer shipped, but was still being
referenced at the bottom of the virsh and libvirtd man pages.

This patch removes it from those man pages, addressing
BZ# 639603:

  https://bugzilla.redhat.com/show_bug.cgi?id=639603
2010-11-23 01:11:10 +11:00
Osier Yang
b503022e57 doc: Add doc for missed options of migrate
* tools/virsh.pod (add doc for options like "--p2p", "--direct",
"--copy-storage-all", "dname", etc.)
2010-11-18 11:32:33 -07:00
Osier Yang
84146be4e9 doc: add doc for missed parameters of attach-disk
* tools/virsh.pod (add docs for --persistent and --sourcetype
of attach-disk, break the long lines in the meantime)
2010-11-18 11:17:03 -07:00
Osier Yang
ed0b7073ba doc: update virsh manual
* tools/virsh.pod (change things like "edit domain.xml" into
  "vi domain.xml", so that it's more clear for user)
2010-11-17 10:28:19 -07:00
Osier Yang
21f5283328 virsh: add net-info command
To list basic information about the network.

* tools/virsh.c
* tools/virsh.pod
2010-11-16 09:18:06 -07:00
Daniel P. Berrange
dad4b5d47f Re-write virsh console to use streams
This re-writes the 'virsh console' command so that it uses
the new streams API. This lets it run remotely and/or as a
non-root user. This requires that virsh be linked against
the simple event loop from libvirtd in daemon/event.c
As an added bonus, it can now connect to any console device,
not just the first one.

* tools/Makefile.am: Link to event.c
* tools/console.c, tools/console.h: Rewrite to use the
  virDomainOpenConsole() APIs with streams
* tools/virsh.c: Support choosing the console name
  via --devname $NAME
2010-11-11 16:03:20 +00:00
Eric Blake
51c83a2b1a virsh: supply long option for -V
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer,
and symbolic names for has_arg.  Give --version an optional arg.
(vshUsage): Document this.
* tools/virsh.pod: Likewise.
2010-11-10 16:57:40 -07:00
Daniel Veillard
5879c15dfd Show compiled in options in virsh -V
To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:

paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/

Compiled with support for:
 Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
 Networking: Remote Daemon Network Bridging Netcf Nwfilter
 Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
 Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->

* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension
2010-11-09 12:01:33 +01:00
Chris Lalancette
a5b5307da2 Implement virsh qemu-monitor-command.
Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command.  This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-11-05 12:14:21 -04:00
Justin Clift
3fb71895e8 virsh: improve the help description for managedsave and start
Updated the descriptions for managedsave and start in virsh and
the virsh man page, and also for managedsave-remove in the virsh
man page.
2010-10-29 11:52:31 +11:00
Osier Yang
1a29a14a2f virsh: Add option 'model' for attach-interface
* tools/virsh.c: add missing option from the CLI to allows setting
  up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
2010-10-26 10:36:40 +02:00
Eric Blake
9b3725627c virsh: consolidate memtune docs
* tools/virsh.pod (memtune): Drop second copy, fill to 80 columns,
enhance wording.
2010-10-19 10:22:52 -06:00
Eric Blake
bf945ee97b vcpu: add virsh support
* tools/virsh.c (cmdSetvcpus): Add new flags.  Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
2010-10-19 10:06:11 -06:00
Nikunj A. Dadhania
0a22f54248 memtune: Add min_guarantee to the virsh memtune command
* tools/virsh.c: Add new memory tunable "min_guarantee", currently only
  ESX can use this
* tools/virsh.pod: Update the manpage
2010-10-19 14:45:35 +02:00
Nikunj A. Dadhania
61dfbf8c3a Update docs for memory parameters and memtune command
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
  it more clear that the user first needs to call the api to get the number
  of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
2010-10-19 14:27:12 +02:00
Eric Blake
b2aedb8e98 virsh: new echo command
* tools/virsh.c (cmdEcho): New command.
(commands): Add it.
* tools/virsh.pod (echo): Document it.
2010-10-15 14:25:39 -06:00
Eric Blake
2f72becc31 virsh: document options in man page
* tools/virsh.pod: Document top-level options.
2010-10-13 07:52:33 -06:00
Lai Jiangshan
a2943243c4 virsh: rework command parsing
Old virsh command parsing mashes all the args back into a string and
miss the quotes, this patches fix it. It is also needed for introducing
qemu-monitor-command which is very useful.

This patches uses the new vshCommandParser abstraction and adds
vshCommandArgvParse() for arguments vector, so we don't need
to mash arguments vector into a command sting.

And the usage was changed:
old:
virsh [options] [commands]

new:
virsh [options]... [<command_string>]
virsh [options]... <command> [args...]

So we still support commands like:
"define D.xml; dumpxml D" was parsed as a commands-string.

and support commands like:
we will not mash them into a string, we use new argv parser for it.

But we don't support the command like:
"define D.xml; dumpxml" was parsed as a command-name, but we have no such command-name.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2010-10-13 07:52:32 -06:00
Justin Clift
de7d4c6ae7 man pages: update authors and copyright notice for libvirtd and virsh
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt.  This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.

Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm".  Without this patch "make rpm" is broken.
2010-07-17 04:51:01 +10:00
Jiri Denemark
2d14615a75 virsh: Fix man page syntax
pod2man prints the following warning when generating virsh.1:

    tools/virsh.pod:890: Unmatched =back
2010-07-12 19:45:22 +02:00
Justin Clift
f5271fc166 virsh: add new --details option to vol-list
This patch adds a new --details option to the virsh vol-list
command, making its output more useful when many luns are
present.

Addresses BZ # 605543

  https://bugzilla.redhat.com/show_bug.cgi?id=605543
2010-07-09 23:35:28 +10:00
Chris Lalancette
d222626af4 Implement virsh managedsave-remove command.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-08 08:42:39 -04:00
Justin Clift
415b14903e virsh: add new --details option to pool-list
This patch adds a new --details option to the virsh pool-list
command, making its output more useful to people who use virsh
for significant lengths of time.

Addresses BZ # 605543

  https://bugzilla.redhat.com/show_bug.cgi?id=605543
2010-06-29 08:37:39 -06:00
Eric Blake
4cc2b6d676 virsh: document attach-disk better
http://bugzilla.redhat.com/601143, part 1 - document existing
behavior.  Ever since Mar 2010 (commit ced154cb), the use of
'attach-disk' or 'attach-device' to change cdrom/floppy media has been
documented but deprecated, but the replacement to use 'update-device'
was not documented.

* tools/virsh.c (cmdAttachInterface, cmdAttachDisk): Fix bad error
message.
* tools/virsh.pod (attach-device, attach-disk): Refer to
update-device for cdrom and floppy behavior.
(update-device): Add documentation.
2010-06-23 08:35:40 -06:00
Justin Clift
2b39cd355a virsh: add --uuid option to vol-pool
Adds an optional switch, --uuid, for telling the virsh vol-pool command
to return the pool UUID rather than pool name.
2010-06-17 14:45:34 -06:00
Justin Clift
31495ef6a1 virsh: add pool support to vol-key command
Presently the vol-key command only supports being provided with
a volume path.

This patch adds support for providing it with a pool and volume
identifier pair as well.

    virsh # vol-key --pool <pool-name-or-uuid> <vol-name-or-path>
2010-06-16 16:32:05 -06:00
Eric Blake
cbe6ebdb53 virsh: add start --paused support
Make 'start --paused' mirror 'create --paused'.

* tools/virsh.c (cmdStart): Use new virDomainCreateWithFlags API
when needed.
* tools/virsh.pod (start): Document --paused.
2010-06-15 09:50:58 -06:00
Justin Clift
b28a068b43 virsh: add snapshot backing store support to vol-create-as
This patch adds two new parameters to the vol-create-as command:

 --backing-vol <volume-name-or-key-or-path>
 --backing-vol-format <format-of-backing-vol>

  virsh # vol-create-as guest_images_lvm snapvol1 5G --backing-vol \
              rhel6vm1lun1
  Vol snapvol1 created

  virsh # vol-create-as image_dir qcow2snap2 5G --format qcow2 \
              --backing-vol imagevol1.qcow2 \
              --backing-vol-format qcow2
  Vol qcow2snap2 created

Additionally, the virsh man page update fixes incorrect snapshot
parameters that were included in my prior bulk volume command patch.
2010-06-10 12:03:13 -06:00
Justin Clift
cd2b18968d virsh: add the volume commands to the virsh man page
This patch also includes the new vol-pool command.
2010-06-08 18:59:29 -06:00
Eric Blake
734bbf0ea9 virsh: add --paused option to create
* tools/virsh.c (opts_create): Add --paused option.
(cmdCreate): Pass appropriate flag.
* tools/virsh.pod: Document it.
2010-06-08 15:41:53 -06:00
Justin Clift
3093daf184 virsh: fix minor virsh man page typos and formatting problems
Signed-off-by: Eric Blake <eblake@redhat.com>
2010-06-07 18:22:42 -06:00
Justin Clift
3db47cb5d2 Add --source-format argument to virsh pool-define-as and pool-create-as
This is the corresponding patch for the virsh man page (virsh.pod).
2010-06-01 16:58:00 -06:00
Justin Clift
e5f31f461f Trivial virsh.pod additions --all for "list" command and similar
This is just a trivial patch to virsh.pod (from git master). It adds the
following pieces to the virsh man page:

  + Shows the --inactive and --all optional parameters for the list
    command.

    Closes Bugzilla #575512, reported by Renich Bon Ciric
    https://bugzilla.redhat.com/show_bug.cgi?id=575512

  + Corrects the existing description of the list command, to now say
    that only running domains are listed if no domains are specified.

    The man page up until this point has said all domains are listed if
    no domains are specified, which is incorrect.

  + Adds the "shut off" state to the list of states for the list
    command.

  + Adds a missing =back around line 755, that pod2man was complaining
    was missing.
2010-06-01 16:46:51 -06:00
Daniel P. Berrange
7703c2c90a Add new domblkinfo command to virsh
virsh # domblkinfo demoguest /dev/hda2
  Capacity:       1048576000
  Allocation:     104857600
  Physical:       104857600

* tools/virsh.c: Implement domblkinfo command mapping to the
  new virDomainGetBlockInfo API
2010-04-29 17:21:32 +01:00
Stefan Berger
281c3c649b add nwfilter functions to virsh man page
With Eric Blake's spelling corrections applied.

Unfortunately after the 0.8.0 release, but here's a beginning of the
documentation of the nwfilter functionality.
2010-04-12 17:50:31 -04:00
Chris Lalancette
e2e000cf1b Rename virsh "revert-to-snapshot" to "snapshot-revert"
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-12 10:09:55 -04:00
Luiz Capitulino
3b106cead5 Small fixes to virsh man page
* tools/virsh.pod: add two missing 's' and section about 'dominfo' is
  duplicated
2010-04-12 14:23:18 +02:00
Jiri Denemark
7ea025aed0 Fix unterminated B<...> in virsh man page 2010-04-08 14:51:46 +02:00
Jiri Denemark
6c5450646c Document all options of virsh dumpxml 2010-04-07 21:32:46 +02:00
Eric Blake
9f337ef752 virsh: improve documentation
Document several missing commands.  There's more work that could be
done, but incremental improvements is better than no patch at all.

* tools/virsh.pod (autostart, connect): Improve grammar.
(create): Improve example.
(domjobabort, domjobinfo, domxml-from-native, domxml-to-native):
Document.
(storage pool commands): New section.
2010-04-06 08:00:25 -06:00
Chris Lalancette
6449cb9014 Document snapshot virsh commands in the man page.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-06 09:50:43 -04:00
Daniel Veillard
d068f9609c Add a managedsave command to virsh
This command implements the managed save operation

* tools/virsh.c: new command
* tools/virsh.pod: documentation
2010-04-04 11:36:59 +02:00
Eric Blake
890af4ca8f virsh: add 'exit' as an alias for 'quit'
Call me lazy: some shells use exit (e.g. sh), others use quit (e.g. ftp),
but I never remember which.  So it's faster to write a patch to make
virsh take both than it is to take a 50-50 guess, and get it wrong
in half of my attempts.

* tools/virsh.c (commands): Add 'exit'.
* tools/virsh.pod: Document it.
2010-03-31 08:40:06 -06:00
Eric Blake
f3661756c1 virsh: support VISUAL, and allow metacharacters in EDITOR
Common Unix practice is to prefer VISUAL over EDITOR, particularly if
the editor of choice spawns a new window.  Thus, it is also common to
see settings like EDITOR='emacs -nw', with the expectation that the
shell will parse this as an argument to 'emacs' and not try to invoke
a file containing a space.

If a user puts junk in EDITOR, they deserve what they get (much more
than virsh will misbehave); furthermore, sudo scrubs EDITOR by
default.  So the blind use of metacharacters in EDITOR should not be
considered too much of a security issue.

* tools/virsh.c (editFile): Prefer VISUAL over EDITOR.  Don't
reject shell metacharacters in EDITOR.
* tools/virsh.pod (edit, net-edit, ENVIRONMENT): Document VISUAL.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=487738.
2010-03-29 16:38:51 -06:00
Eric Blake
b522264b40 virsh: improve man page
* tools/virsh.pod: (DESCRIPTION): Improve grammar.  Mention other drivers.
(ENVIRONMENT): Document EDITOR.
(COPYRIGHT): Bump.
2010-03-29 16:38:51 -06:00
Jiri Denemark
5ee592208c Add migrate-setmaxdowntime command to virsh 2010-03-19 22:57:10 +01:00
Jiri Denemark
73b0b59667 Adds a cpu-baseline command for virsh
* tools/virsh.c: add a command to compute a CPU baseline based on
  multiple CPU definitions in an XML chunk
* tools/virsh.pod: add it to the man page
2010-02-17 14:52:07 +01:00
Jiri Denemark
704bd732b5 Document cpu-compare command in virsh man page
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-20 16:23:05 +01:00
David Jorm
9bca7a7e2e BZs 528709 548485 2010-01-18 09:48:39 +10:00
Adam Litke
cc3618d77b Document the dommemstat command in the virsh man page
* tools/virsh.pod: Provide a basic mention of the dommemstat command in
  the virsh man page.
2009-12-21 15:24:56 +01:00
Paolo Bonzini
edc9e78b48 add virsh --suspend arg to migrate command
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.

* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
2009-12-11 10:00:44 +01:00
Daniel Veillard
7d43c80bc4 514532 Fix man page, most operation are synchronous
* tools/virsh.pod: the man page was stating that most operations
  are asynchronous while in fact most of them are synchronous except
  domain shutdown, setvcpus and setmem.
2009-11-20 16:09:36 +01:00
Daniel P. Berrange
7ff256ec98 Move virsh into tools/ directory
Move the virsh tool and its man page into the tools directory

* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
  src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
  virsh location
2009-09-21 14:41:45 +01:00