Commit Graph

1246 Commits

Author SHA1 Message Date
Michal Privoznik
607806f87f Fix const correctness
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.

There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-16 12:07:24 +02:00
Ján Tomko
3103a9770f Fix assignment of comparison against zero
Assign the value we're comparing:
(val = func()) < 0
instead of assigning the comparison value:
(val = func() < 0)

Both were introduced along with the code,
the TLS tests by commit bd789df in 0.9.4
net events by commit de87691 in 1.2.2.

Note that the event id type fix is a no-op:
vshNetworkEventIdTypeFromString can only return
-1 (failure) and the event is never used or
0 (the only possible event) and the value of 0 < 0 is still 0.
2014-07-16 09:39:57 +02:00
Peter Krempa
6f04fb151b doc: Be more specific about semantics of _REUSE_EXT flag
Snapshots and block-copy have a flag that forces qemu to re-use existing
file. Our docs weren't exactly clear on what the existing file should
contain for this to actually work.

Re-word the docs a bit to state that the file needs to be pre-created in
the desired format and the backing chain metadata needs to be set prior
to handing it over to qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1084360
2014-07-14 09:26:39 +02:00
Peter Krempa
500f80a595 doc: Document that snapshot name of block-backed disk isn't autogenerated
Libvirt generates external snapshot target file names for file backed
storage but not for block backed storage. Document the limitation.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1032363
2014-07-14 09:26:26 +02:00
Martin Kletzander
fd59f6c83e virsh: document the possibility of accepting integers for numatune mode
According to the code, 'virsh numatune' supports integers for
specifying --mode as well as the string definitions "strict",
"interleave", and "preferred".  However, this possibility was not
documented anywhere, so this patch adds it to both the man page and
command help.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1085706

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-09 15:08:23 +02:00
Peter Krempa
37183e5db8 lib: Introduce flag VIR_DOMAIN_BLOCK_REBASE_RELATIVE
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
2014-07-08 11:51:06 +02:00
Peter Krempa
bda44ca2ca lib: Introduce flag VIR_DOMAIN_BLOCK_COMMIT_RELATIVE
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
2014-07-08 11:45:04 +02:00
Pavel Hrdina
c5aaf0b456 tools/wireshark: fix rpm build
There is a missing include of $(top_srcdir)/include to handle
"libvirt/libvirt.h" header file.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-07-08 09:30:45 +02:00
Peter Krempa
87388228f4 virsh: domain: Use inactive XML when unplugging interface with --config
Similary to cmdDetachDisk fetch the inactive definition when --config
is specified as the active may not contain the network interface
if it was plugged with --config.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056902
2014-07-07 13:05:32 +02:00
Michal Privoznik
e74fa5702a wireshark: Honor API change coming with 1.12 release
https://bugs.gentoo.org/show_bug.cgi?id=508336

At wireshark, they have this promise to change public dissector APIs
only with minor version number change. Which they did when releasing
the version of 1.12.

Firstly, they've changed tvb_memdup() in
a0c53ffaa1bb46d8c9db2ec739401aa411c9790e so now it takes four arguments
instead of three. The new argument is placed at the very beginning of
the list of arguments and basically says the scope where we'd like to
allocate the memory. According to the documentation NULL should be the
default value.

Then, the tcp_dissect_pdus() signature changed too. Well, the function
that actually dissects reassembled packets as tcp_dissect_pdus()
reorder TCP packets into one big chunk and then calls a user function
to dissect the PDU at once. The change is dated back to
8081cf1d90397cbbb4404f9720595e1537ed5e14.

Then, WS_DLL_PUBLIC_NOEXTERN was replaced with WS_DLL_PUBLIC_DEF in
5d87a8c46171f572568db5a47c093423482e342f.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-04 17:01:20 +02:00
Michal Privoznik
906d0abfe7 wireshark: Include more of libvirt internals
The rationale is to not duplicate code which is done in
packet-libvirt.h for instance. Moreover, this way we can drop
__attribute_((unused)) used int packet-libvirt.c in favor of
ATTRIBUTE_UNUSED.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-04 17:00:46 +02:00
Michal Privoznik
e9f2929f41 virsh: expose virConnectGetDomainCapabilities
The API is exposed under 'domcapabilities' command. Currently, with
the variety of drivers that libvirt supports, none of the command
arguments is obligatory, but all are optional instead.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-03 12:22:37 +02:00
Yanbing Du
7e157858b4 virsh: Allow attach-disk to specify disk target bus
By default, the bus type is inferred from the style of the device
name('target' in this command), e.g. a device named 'sda' will
typically be exported using a SCSI bus. Actually, not only SCSI bus,
but USB/SATA bus also use this kind of device name. So add '--bus'
option for attach-disk command to allow user specify the target bus.

Signed-off-by: Yanbing Du <ydu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-02 13:01:45 +02:00
Peter Krempa
02bffd47bd net: merge virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
2014-06-27 09:38:13 +02:00
Jiri Denemark
80d0918bd2 virConnectCompareCPU: Introduce FAIL_INCOMPATIBLE flag
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-06-26 00:44:02 +02:00
Jiri Denemark
a4743860f8 virsh: Remove bogus stat on log file
Let's just open the file right away and deal with errors. Moreover,
there's no reason to forbid logging to, e.g., a pipe.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-06-26 00:43:38 +02:00
Nehal J Wani
59cac9a918 net-dhcp-leases: Add virsh support
Use virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC in virsh.

The new feature supports the follwing methods:

1. Retrieve leases info for a given virtual network

2. Retrieve leases info for given network interface

tools/virsh-domain-monitor.c
   * Introduce new command : net-dhcp-leases
     Example Usage: net-dhcp-leases <network> [mac]

   virsh # net-dhcp-leases --network default6
   Expiry Time          MAC address        Protocol  IP address                Hostname        Client ID or DUID
   -------------------------------------------------------------------------------------------------------------------
   2014-06-16 03:40:14  52:54:00:85:90:e2  ipv4      192.168.150.231/24        fedora20-test   01:52:54:00:85:90:e2
   2014-06-16 03:40:17  52:54:00:85:90:e2  ipv6      2001:db8:ca2:2:1::c0/64   fedora20-test   00:04:b1:d8:86:42:e1:6a:aa:cf:d5:86:94:23:6f:94:04:cd
   2014-06-16 03:34:42  52:54:00:e8:73:eb  ipv4      192.168.150.181/24        ubuntu14-vm     -
   2014-06-16 03:34:46  52:54:00:e8:73:eb  ipv6      2001:db8:ca2:2:1::5b/64   -               00:01:00:01:1b:30:c6:aa:52:54:00:e8:73:eb

tools/virsh.pod
   * Document new command

src/internal.h
   * Introduce new macro: EMPTYSTR
2014-06-24 12:26:31 +01:00
Michal Privoznik
8d8e1d9dbc cmdFreepages: initialize @tmp
In the 404bac14 the @tmp variable was introduced. It's purpose is to
avoid typecasting when parsing --pagesize argument. However, if the
argument is not presented, tmp may be used uninitialized resulting in
bogus virNodeGetFreePages() API call:

virsh freepages --cellno 2
error: Failed to open file '/sys/devices/system/node/node2/hugepages/hugepages-4294967295kB/free_hugepages': No such file or directory

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-23 20:25:22 +02:00
Eric Blake
404bac14ab virsh: fix broken code in freepages
Commit 9e3efe53 broke the build under valgrind or clang, by writing
8 bytes through an allocation of 4 bytes.  It also risks multiplication
overflow when mallocing (that's a pervasive problem that needs an
audit in the rest of the code, but we might as well fix this one while
we are here), and had a typo.

* tools/virsh-host.c (cmdFreepages): Avoid integer overflow and
undefined behavior.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-19 09:21:08 -06:00
Michal Privoznik
9e3efe53de virsh: Expose virNodeGetFreePages
The new API is exposed under 'freepages' command.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-19 15:10:50 +02:00
Eric Blake
f182da20b0 virsh: expose new active commit controls
Add knobs to virsh to manage a 2-phase active commit of the top
layer, similar to knobs already present on blockcopy.  While this
code will fail until later patches actually implement the new
knobs in the qemu driver, doing it now proves that the API is
usable and also makes it easier for testing the qemu changes as
they are made.

* tools/virsh-domain.c (cmdBlockCommit): Add --active, --pivot,
and --keep-overlay options, modeled after blockcopy.
(blockJobImpl): Support --active flag.
* tools/virsh.pod (blockcommit): Document new flags.
(blockjob): Mention 2-phase commit interaction.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-19 07:07:25 -06:00
Eric Blake
1bfe73a126 blockjob: use stable disk string in job event
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-19 06:54:12 -06:00
Peter Krempa
011154764f virsh: man: Correctly spell QEMU
s/QEemu/QEMU/g
2014-06-18 11:26:37 +02:00
Peter Krempa
09e1ec19ae virsh: man: Fix examples and docs for virsh version
The version command now takes the --daemon parameter for a while and the
output example was pretty outdated.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110673
2014-06-18 11:26:18 +02:00
Eric Blake
1784037991 virsh: improve blockcopy UI
Peter's review of an early version of my addition of active block
commit pointed out some issues that I was copying from the block
copy code; fix them up now before perpetuating them.

For virsh commands that manage a single API call, it's nice to have
a 1:1 mapping of options to flags, so that we can test that
lower-layer software handles flag combinations correctly.  But where
virsh is introducing syntactic sugar to combine multiple API calls
into a single user interface, we might as well make that interface
compact.  That is, we should allow the shorter command-line of
'blockcopy $dom $disk --pivot' without having to explicitly specify
--wait, because this isn't directly a flag passed to a single
underlying API call.

Also, my use of embedded ?: ternaries bordered on unreadable.

* tools/virsh-domain.c (cmdBlockCopy): Make --pivot, --finish,
and --timeout imply --wait. Drop excess ?: operators.
* tools/virsh.pod (blockcopy): Update documentation.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-12 14:41:40 -06:00
Jincheng Miao
e430410480 virsh: forbid negative vcpu argument to vcpupin
The vcpupin command allowed specifying a negative number for the --vcpu
argument. This would the overflow when the underlying virDomainPinVcpu
API was called.

 $ virsh vcpupin r7 -1 0
 error: numerical overflow: input too large: 4294967295

Switch the vCPU variable to a unsigned int and parse it using the
corresponding function.

Also improve the vcpupin test to cover all the defects.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101059

Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2014-06-12 14:06:21 +02:00
Peter Krempa
c62125395b virsh: Reject negative numbers in vshCommandOptULongLong
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
2014-06-12 14:06:21 +02:00
Peter Krempa
0e2d73051a virsh: Reject negative numbers in vshCommandOptUL
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.
2014-06-12 14:06:20 +02:00
Peter Krempa
37e663adb6 virsh: Reject negative numbers in vshCommandOptUInt
Use virStrToLong_uip instead of virStrToLong_ui to reject negative
numbers in the helper. None of the callers expects the wraparound
"feature" for negative numbers.

Also add a function that allows wrapping of negative numbers as it might
be used in the future and be explicit about the new semantics in the
function docs.
2014-06-12 14:06:20 +02:00
Roman Bogorodskiy
aec0c6d3d5 virsh: include bhyve in virsh -V output
Add 'Bhyve' in hypervisor list reported by 'virsh -V'
if it's compiled it.
2014-06-11 22:16:09 +04:00
Chen Fan
c85b09cd7a virsh: Add details about specified migration host
the 'migration_host' description may be a bit difficult to
understand for some users, so enhance the manual

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-10 11:20:06 -06:00
Eric Blake
b298025063 blockcommit: document semantics of committing active layer
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.

Stepping back a bit, there are two valid semantics for a
commit operation:

1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.

2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.

Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job.  However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.

This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics.  It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML.  Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-10 11:11:16 -06:00
Ján Tomko
a3173fef9d Implement pretty flag for vcpuinfo and nodecpumap
Report CPU affinities / online CPUs in human-readable form when
this flag is present:

Before:
CPU Affinity:   y-yy

After:
CPU Affinity:   0,2-3 (out of 4)

https://bugzilla.redhat.com/show_bug.cgi?id=985980
2014-06-06 14:35:19 +02:00
Ján Tomko
8f3f51b723 virsh: Separate API calls and result printing in cmdVcpuinfo
This allows reuse of the result printing code.
2014-06-06 14:35:18 +02:00
Ján Tomko
bec105e6db virsh: Invert logic in cmdVcpuinfo
Initialize 'ret' to false and introduce a cleanup label.
2014-06-06 14:35:18 +02:00
Michal Privoznik
289a3163de virsh-nodedev: Avoid spurious errors
Our public free functions explicitly don't accept NULL pointers
(sigh). Therefore, callers must do something like this:

    if (dev)
        virNodeDeviceFree(dev);

And we are not doing that on two places I've found. This leads to
dummy error message thrown by virsh:

    virsh # nodedev-dumpxml nonexistent-device
    error: Could not find matching device 'nonexistent-device'
    error: invalid node device pointer in virNodeDeviceFree

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-02 18:09:09 +02:00
Peter Krempa
6ef0b03483 virsh: Check whether found volume is member of the specified storage pool
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:

Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':

Currently we'd return:
  $ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
  Name:           test.qcow
  Type:           file
  Capacity:       100.00 MiB
  Allocation:     212.00 KiB

After the fix:
 $ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
 error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
2014-06-02 10:56:49 +02:00
Eric Blake
be673413a3 virsh: fix typos in virsh man page
* tools/virsh.pod (attach-disk): Drop duplicate --config, fix typo
in --sourcetype.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-28 20:10:38 -06:00
Eric Blake
88b5acb67f build: nuke more uses of 'sync'
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.

* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-19 17:07:47 -06:00
Eric Blake
ab5178188f maint: shorten 'TypeType' function names
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name.  Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.

* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-16 00:22:18 -06:00
Michal Privoznik
222fdbfd2b virsh: Expose virDomain{Get,Set}Time
These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-05-15 16:44:38 +02:00
Li Yang
ed5950909d virsh: reject undefine --wipe-storage without also naming storage
For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.

Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined

After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'

Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-14 11:11:50 -06:00
Julio Faracco
1ce86e62e1 conf: use typedefs for enums in "src/conf/storage_conf.h"
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-14 10:18:35 -06:00
Peter Krempa
31b140eba4 virsh: domain: Fix output of the VNC display number for domdisplay
Commit 9976c4b9a6 broke the output for VNC
displays as the port number is converted to VNC display number by
subtracting 5900. This yields port 0 for the first display and thus the
output would be skipped.

Before:
 $ virsh domdisplay VM
 vnc://localhost

After:
 $ tools/virsh domdisplay VM
 vnc://localhost:0
2014-05-13 11:34:38 +02:00
Tomoki Sekiyama
061c6347e4 virsh: Expose new virDomainFSFreeze and virDomainFSThaw API
These are exposed under domfsfreeze command and domfsthaw command.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
2014-05-12 21:01:13 -06:00
Li Yang
e4fe06e017 virsh: Replace list element to defined variable
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
2014-05-05 13:49:09 -06:00
Jim Fehlig
b98bf81151 Introduce a new flag for controlling shutdown/reboot
Add a new flag to virDomain{Reboot,Shutdown}FlagValues to allow
shutting down and rebooting a domain via the Xen paravirt control
interface.
2014-05-05 10:52:21 -06:00
Daniel P. Berrange
391ac4d990 Activate build dir overrides in libvirtd, virtlockd, virsh & tests
Add calls to virFileActivateDirOverride so that the build dir
overrides are activated.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:32 +01:00
Ján Tomko
22a92eb0a7 Document behavior of setvcpus during guest boot
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1088748

The hotplugged vcpus could fail to show up in the guest if
they were added during boot, see:
https://bugzilla.redhat.com/show_bug.cgi?id=807508

Also change arbitrary to arbitrarily.
2014-04-23 14:24:21 +02:00
Nehal J Wani
3d5c29a17c Fix typos in src/*
Fix minor typos in source comments

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-21 16:49:08 -06:00