A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML
<devices>
...
<lease>
<lockspace>somearea</lockspace>
<key>thequickbrownfoxjumpsoverthelazydog</key>
<target path='/some/lease/path' offset='23432'/>
</lease>
...
</devices>
The 'lockspace' is a unique identifier for the lockspace which
the lease is associated
The 'key' is a unique identifier for the resource associated
with the lease.
The 'target' is the file on disk where the leases are held.
* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
tests/qemuxml2xmltest.c: Test XML handling for leases
Alas, /usr/bin/kvm is also not directly supported by testutilsqemu.c.
In fact, _any_ test that uses <cpu match=...> has to use our faked
qemu.sh in order to properly answer the 'qemu -cpu ?' probe done
during qemu command line building.
* tests/qemuxml2argvdata/*graphics-spice-timeout*: Switch emulator, again.
Commit 2d6adabd53 replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.
Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port
* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
in <graphics> listen attributes
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).
Usage:
<graphics type='spice' autoport='yes'>
<streaming mode='off'/>
</graphics>
Tested with the above and with tests/qemuxml2argvtest.
Signed-off-by: Alon Levy <alevy@redhat.com>
Make: passed
Make check: passed
Make syntax-check: passed
this is the commit to introduce the function to create new character
device definition for the domain as advised by Cole Robinson
<crobinso@redhat.com>.
The function is used on the relevant places and also new tests has
been added.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This extends the SPICE XML to allow variable compression settings for audio,
images and streaming:
<graphics type='spice' port='5901' tlsPort='-1' autoport='yes'>
<image compression='auto_glz'/>
<jpeg compression='auto'/>
<zlib compression='auto'/>
<playback compression='on'/>
</graphics>
All new elements are optional.
For qemu names the primary vga as "qxl-vga":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE,...
2) if vram is not specified for 2nd qxl device, (use the default
set by global):
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
For qemu names all qxl devices as "qxl":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE ...
2) if vram is not specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).
For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.
v1 - v2:
* modify "virDomainVideoDefaultRAM" so that it returns 16M as the
default vram_size for qxl device.
* vram_size * 1024 (qemu accepts bytes for vram_size).
* apply default vram_size for qxl device for which vram_size is
not specified.
* modify "graphics-spice" tests (more sensiable vram_size)
* Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).
v2 - v3:
* Modify default video memory size for qxl device from 16M to 24M
* Update codes to be consistent with changes on qemu_capabilities.*
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=629662
Explanation
qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.
'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)
'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)
The resulting difference, according to the qemu developer who added
the option is:
bh makes tx more asynchronous and reduces latency, but potentially
causes more processor bandwidth contention since the cpu doing the
tx isn't necessarily the cpu where the guest generated the
packets.
Solution
This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:
<interface ...>
...
<model type='virtio'/>
<driver txmode='iothread'/>
...
</interface>
I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)
Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of
qemu -device virtio-net-pci,?
If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.
Adds <smartcard mode='passthrough' type='spicevmc'/>, which uses the
new <channel name='smartcard'/> of <graphics type='spice'>.
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainGraphicsSpiceChannelName): New
enum value.
(virDomainChrSpicevmcName): New enum.
(virDomainChrSourceDef): Distinguish spicevmc types.
* src/conf/domain_conf.c (virDomainGraphicsSpiceChannelName): Add
smartcard.
(virDomainSmartcardDefParseXML): Parse it.
(virDomainChrDefParseXML, virDomainSmartcardDefParseXML): Set
spicevmc name.
(virDomainChrSpicevmc): New enum conversion functions.
* src/libvirt_private.syms: Export new functions.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Conditionalize
name.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.args:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.xml:
Likewise.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=615757
Add a new character device backend for virtio serial channels that
activates the QEMU spice agent on the main channel using the vdagent
spicevmc connection. The <target> must be type='virtio', and supports
an optional name that specifies how the guest will see the channel
(for now, name must be com.redhat.spice.0).
<channel type='spicevmc'>
<target type='virtio'/>
<address type='virtio-serial' controller='1' bus='0' port='3'/>
</channel>
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainChrType): New enum value.
* src/conf/domain_conf.c (virDomainChr): Add spicevmc.
(virDomainChrDefParseXML, virDomainChrSourceDefParseXML)
(virDomainChrDefParseTargetXML): Parse and enforce proper use.
(virDomainChrSourceDefFormat, virDomainChrDefFormat): Format.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildCommandLine): Add qemu support.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.xml: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.args:
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Assuming a hypervisor that supports multiple smartcard devices in the
guest, this would be a valid XML description:
<devices>
<smartcard mode='host'/>
<smartcard mode='host-certificates'>
<certificate>/path/to/cert1</certificate>
<certificate>/path/to/cert2</certificate>
<certificate>/path/to/cert3</certificate>
</smartcard>
<smartcard mode='passthrough' type='tcp'>
<source mode='bind' host='127.0.0.1' service='2001'/>
<protocol type='raw'/>
</smartcard>
</devices>
(As of this commit, the qemu hypervisor will be the first
implementation, but it only supports one smartcard.)
* docs/formatdomain.html.in (Smartcard devices): New section.
* docs/schemas/domain.rng (smartcard): New define, used in
devices.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml: New file
to test schema.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml:
Likewise.
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.
The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.
Based on a patch originally by Matthias Dahl.
Red Hat Bugzilla #591703
Signed-off-by: Eric Blake <eblake@redhat.com>
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Alter the
chardev alias.
(qemuBuildCommandLine): Output an id for the chardev counterpart.
* tests/qemuxml2argvdata/*: Update tests to match.
Reported by Daniel P. Berrange.
As noticed by Eric, commit 8e28c5d402,
which fixed generation of virtio-serial port numbers, forgot to adjust
test files which resulted in make check failure.
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.
This is basically Dan's proposal of
<sound model='ich6'>
<codec type='output' slot='0'/>
<codec type='duplex' slot='3'/>
</sound>
without the codec bits implemented.
The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:
- every <sound> device has a <codec type='default'/> (unless codecs are
manually specified)
- <codec type='none'/> is required to specify 'no codecs'
- new audio settings like mic=on|off could then be exposed in
<sound> or <codec> in a consistent manner for all sound models
v2:
Use model='ich6'
v3:
Use feature detection, from eblake
Set codec id, bus, and cad values
v4:
intel-hda isn't supported if -device isn't available
v5:
Comment spelling fixes
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
Skip IB700 when assigning PCI slots.
Note: the I6300ESB watchdog _is_ a PCI device.
To test this: I applied this patch to libvirt-0.8.3-2.fc14 (rebasing
it slightly: qemu_command.c didn't exist in that version) and
installed this on my machine, then tested that I could successfully
add an ib700 watchdog device to a guest, start the guest, and the
ib700 was available to the guest. I also added an i6300esb (PCI)
watchdog to another guest, and verified that libvirt assigned a PCI
device to it, that the guest could be started, and that i6300esb was
present in the guest.
Note that if you previously had a domain with a ib700 watchdog, it
would have had an <address type='pci' .../> clause added to it in the
libvirt configuration. This patch does not attempt to remove this.
You cannot start such a domain -- qemu gives an error if you try.
With this patch you are able to remove the bogus address element
without libvirt adding it back.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.
Commit febc591683 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.
The log lists things like -smbios type=1,vendor="Red Hat", which
is great for shell parsing, but not so great when you realize that
execve() then passes those literal "" on as part of the command
line argument, such that qemu sets SMBIOS with extra literal quotes.
The eventual addition of virCommand is needed before we have the API
to shell-quote a string representation of a command line, so that the
log can still be pasted into a shell, but without inserting extra
bytes into the execve() arguments.
* src/qemu/qemu_conf.c (qemuBuildSmbiosBiosStr)
(qemuBuildSmbiosSystemStr): Qemu doesn't like quotes around uuid
arguments, and the remaining quotes are passed literally to
smbios, making <smbios mode='host'/> inaccurate. Removing the
quotes makes the log harder to parse, but that can be fixed later
with virCommand improvements.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.args: 'Fix' test; it
will need fixing again once virCommand learns how to shell-quote a
potential command line.
* docs/schemas/domain.rng: Fix merge error which left SPICE channel
elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
<memballoon> element
This extends the SPICE XML to allow channel security options
<graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
<channel name='main' mode='secure'/>
<channel name='record' mode='insecure'/>
</graphics>
Any non-specified channel uses the default, which allows both
secure & insecure usage
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add XML syntax for specifying per
channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
QEMU crashes & burns if you try multiple Cirrus video cards, but
QXL copes fine. Adapt QEMU config code to allow multiple QXL
video cards
* src/qemu/qemu_conf.c: Support multiple QXL video cards
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.
* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
-spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL
* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
case for generating spice args with RHEL6 kvm
When using 0-prefixed numbers, QEmu will interpret them as octal numbers
(as C convention says); this means that if you attach a device that has
addr > 10 (decimal) you're going to attach a different device.
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
