Upcoming patches are going to rewrite and semantically modify how
bitmaps are handled during blockjobs. This is possible as incremental
backup is not yet fully enabled.
As the changes are going to be incompatible with any current test data
remove all test cases for bitmap handling during checkpoint deletion,
incremental backups, block commit, block copy, and bitmap validation
operations.
The tests will be gradually added back later after the code and
test-data is refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the new test data for checkpoint deletion testing. This test also
requires modification of the internals to allow checking for test
failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the new test data when calculating incremental backup operations. As
incremental backup fails with no bitmap the test code is modified to
allow testing this case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is not captured by one of the intermediate checkpoints the
code would fail, but we can easily calculate the bitmaps to merge
correctly by skipping over checkpoints which don't describe the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It always loads the latest schema. Prepare for loading others as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some test cases are used to validate interactions with old qemu. We need
to skip validation of deprecation with those once it will be added.
In case of commands which were already replaced by code based on
capabilities we can skip the full validation once the command is
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the function and passing of 'def' through the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev libvirt provides the string which is recorded as
'backing store' property of an image to qemu. Add testing for
qemuBlockGetBackingStoreString which generates these strings as there's
logic which determines which format to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We had two non-syncrhonized arrays holding the individual data. This was
a lazy way to do it when I was adding new tests recently. Since it's
hard to extend with new data to test refactor the storage of test data
to use a new struct where all per-image data are kept and can be
extended easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was misplaced. Group it together with other helper
functions for testing disk XML to qemu JSON props conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic variable clearing and remove the cleanup sections of
testQemuDiskXMLToProps, testQemuDiskXMLToPropsValidateSchema and
testQemuDiskXMLToPropsValidateFile.
testQemuDiskXMLToPropsValidateFileSrcOnly already uses new helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Based on the configuration from the only qemuxml2argv test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the 'snapshots-synthetic-broken' test data for block-commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test handling of more complex cases of merging bitmaps accross
snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add code for testing the two necessary steps of handling bitmaps during
block commit and exercise the code on the test data which we have for
bitmap handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Set the 'id' field of the backing chain properly so that we can look
up images, and initialize 6 images instead of 10 as we don't use more
currently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We currently don't model the 'ssh' protocol properties properly and
since it seems impossible for now (agent path passed via environment
variable). To allow libguestfs to work as it used in pre-blockdev era we
must carry the properties over to the command line. For this instance we
just store it internally and format it back.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the interpretation of the JSON pseudo-protocol backing
store into JSON structs for blockdev. This will be used to test JSON
pseudo-URIs used by libguestfs while actually also validating the output
against the QMP schema. Since libguestfs uses obsolete/undocumented
values the outputs will differ and a benefit is that modern output is
used now.
The example test case covers the fields and values used by libguestfs
when using the https driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was invoking the JSON formatter with the 'legacy' flag thus
formatting bunch of obsolete JSON blockdev definitions. We also should
test the modern ones. Add a boolean and re-run all the tests in both
cases.
Additionally for any modern invocation we should also validate that the
output conforms to the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move lookup of the schema root earlier so that multiple functions
can use it for validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple tests require the schema. Extract the loading into a separate
variable to avoid issues with ownership of the pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for parsing the recently added fields from backing file
pseudo-protocol strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).
Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use some of the existing bitmap data to add tests for
qemuBlockBitmapsHandleBlockcopy.
As the output depends on the ordering in the hash table we must also
install the "virdeterministichash" mock preload library.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a case where a bitmap spanning multiple images is missing one of the
intermediate components.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a validator which checks that a bitmap spanning multiple backing
chain members doesn't look broken. The current rules are that no
intermediate birmaps are missing (unfortunately it's hard to know
whether the topmost or bottommost bitmap is missing) and none of the
components is inconsistent.
We can obviously improve it over time.
The validator is also tested against the existing bitmap data we have
for the backup merging test as well as some of the existing broken
bitmap synthetic test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the glib allocation function that never returns NULL and remove the
now dead-code checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow qemu access to modify backing files in case when we want to delete
a checkpoint.
This patch adds tracking of which images need to be relabelled when
calculating the transaction, the code to relabel them and rollback.
To verify that stuff works we also output the list of images to relabel
into the test case output files in qemublocktest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the synthetic test data to verify that the algorithm correctly picks
bitmaps to merge when the bitmap is changed along with the image itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test cases for merging various pairs of bitmaps when snapshots were
created together with checkpoints.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow deleting of checkpoints when snapshots were created along. The
code tracks and modifies the checkpoint list so that backups can still
be taken with such a backing chain. This unfortunately requires to
rename few bitmaps (by copying and deleting them) in some cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a faked qemu output which would simulate scenario where libvirt
would take a snapshot and checkpoint simultaneously. This is visible in
libvirt-2-format node where bitmap 'c' appears, but bitmap 'b' which is
active in the previous layer is not present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add all intermediate steps and deletion of the current checkpoint on a
flat (single-image) disk image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test infrastructure and a basic test for bitmap deletion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
