Commit Graph

40 Commits

Author SHA1 Message Date
Peter Krempa
ca8f7b8a02 qemuxml2argvtest: Sanitize testing of '-enable-fips'
Rename 'FLAG_FIPS' to 'FLAG_FIPS_HOST' to signify that we are simulating
a host supporting fips mode and use the flag to assert 'enabeFips'
argument of 'qemuProcessCreatePretendCmdBuild' rather than passing it
via QEMU_CAPS_ENABLE_FIPS.

This prepares the testsuite for testing of -enable-fips deprecation in
qemu-5.2.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-22 09:03:28 +02:00
Sebastian Mitterle
9ec77eef2d qemuxml2argvtest: Test expected error messages
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.

It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.

In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.

For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.

Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.

Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-09-23 22:47:59 +02:00
Peter Krempa
576746d412 qemuxml2argvtest: Add QAPI/QMP schema validation for -blockdev and -netdev
Our hotplug test cases are weak in comparison to the qemuxml2argvtest.
Use all the the input data to also validate the arguments for -netdev
and -blockdev against the appropriate commands of the QMP schema.

Note that currently it's done just for the _CAPS versions of tests but
commenting out a line in the test file allows to validate even cases
which don't use real capabilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-05-20 09:41:58 +02:00
Daniel P. Berrangé
adf009b48f qemu: use host CPU object directly
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
bce3b0807e qemu: cache host arch separately from virCapsPtr
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.

In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:15 +00:00
Jiri Denemark
30c6d99209 qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
To avoid mismatch between host and QEMU capabilities.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Andrea Bolognani
c4d6465aa7 tests: testQemuCapsIterate: Pass prefix and version to callback
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.

This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:14 +02:00
Andrea Bolognani
5a45ed9c96 tests: testQemuCapsIterate: Pass suffix to callback
Right now users need to hardcode the suffix, which is not a big
deal since they're the ones who passed it to testQemuCapsIterate()
in the first place; however, since we're already passing most of
the information to the callback and we're going to add more later
on, it makes sense to be consistent and pass the suffix too.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:12 +02:00
Andrea Bolognani
51495a4d73 tests: testQemuCapsIterate: Pass inputDir to callback
Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:10 +02:00
Marc-André Lureau
7d24c8a469 tests: add slirp-helper qemuxml2argv test
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-09-06 12:47:47 +02:00
Jonathon Jongsma
c35d8a7d5e tests: use #pragma once in headers
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-19 17:12:34 +02:00
Andrea Bolognani
45dff4bbfa tests: Drop dirname argument from testQemuCapsIterate()
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:57 +02:00
Andrea Bolognani
3fe020a038 tests: Drop dirname argument from testQemuGetLatestCapsForArch()
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:55 +02:00
Andrea Bolognani
f0e48979c9 tests: Make TEST_QEMU_CAPS_PATH public
The value (with a slightly different name) is currently private
to testutilsqemu, but since we use this path all over the place
it makes sense to define it publicly and avoid repetition.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:49 +02:00
Cole Robinson
89effa6159 tests: add testQemuGetLatestCaps
Move the capslatest building from qemuxml2argv to testutilsqemu

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-10 19:12:42 -04:00
Cole Robinson
2b9d64096f tests: Move testQemuInfo* to testutilsqemu
So it can eventually be shared with qemuxml2xml

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-10 19:05:08 -04:00
Andrea Bolognani
30439c1b81 tests: Introduce testQemuCapsIterate()
This function iterates over a directory containing
capabilities-related data, extract some useful bits of
information from the file name, and calls a user-provided
callback.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-03-13 11:07:10 +01:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
4cfd709021 Fix many mistakes & inconsistencies in header file layout
This introduces a syntax-check script that validates header files use a
common layout:

  /*
   ...copyright header...
   */
  <one blank line>
  #ifndef SYMBOL
  # define SYMBOL
  ....content....
  #endif /* SYMBOL */

For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:

  #ifndef SYMBOL_ALLOW
  # error ....
  #endif /* SYMBOL_ALLOW */
  <one blank line>

The many mistakes this script identifies are then fixed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:46:53 +00:00
Peter Krempa
e831821cbc tests: qemu: Add helper code to lookup latest capability file
The helper iterates the directory with files for the capability test and
looks up the most recent one for the given architecture. This will allow
testing against the newest qemu capabilities so that we can catch
regressions in behaviour more easily.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-04-19 11:20:34 +02:00
Peter Krempa
7de761a67b tests: utils: Allow parsing test capability file without virCaps
virCaps was used only to propagate the host architecture, so the
function can be extracted in a way which does not require it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-04-17 15:51:46 +02:00
Pavel Hrdina
d03de54e7e qemu: switch QEMU capabilities to use virFileCache
The switch contains considerable amount of changes:

  virQEMUCapsRememberCached() is removed because this is now handled
  by virFileCacheSave().

  virQEMUCapsInitCached() is removed because this is now handled by
  virFileCacheLoad().

  virQEMUCapsNewForBinary() is split into two functions,
  virQEMUCapsNewData() which creates new data if there is nothing
  cached and virQEMUCapsLoadFile() which loads the cached data.
  This is now handled by virFileCacheNewData().

  virQEMUCapsCacheValidate() is removed because this is now handled by
  virFileCacheValidate().

  virQEMUCapsCacheFree() is removed because it's no longer required.

  Add virCapsPtr into virQEMUCapsCachePriv because for each call of
  virFileCacheLookup*() we need to use current virCapsPtr.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2017-07-26 15:36:21 +02:00
Jiri Denemark
5c8c2d1633 cpu_ppc64: Add support for host-model on POWER9
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-06-13 10:35:53 +02:00
Pavel Hrdina
8d04ea1661 tests/testutilsqemu: properly initialize qemu caps for tests
This removes the hacky extern global variable and modifies the
test code to properly create QEMU capabilities cache for QEMU
binaries used in our tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Jiri Denemark
68c7011856 qemu: Store host-model CPU in qemu capabilities
Host capabilities provide libvirt's view of the host CPU, but for a
useful support for host-model CPUs we really need a hypervisor's view of
the CPU. And since the view can be differ with emulator, qemu
capabilities is the best place to store the host CPU model.

This patch just copies the CPU model from host capabilities, but this
will change in the future.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:08 +02:00
Jiri Denemark
bfc5a5e6ff testutilsqemu: Add default CPU for PPC64 architectures
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:08 +02:00
Jiri Denemark
127e0b53ec testutilsqemu: Helpers for changing host CPU and arch
Changing a host architecture or a CPU is not as easy as assigning a new
value to the appropriate element in virCaps since there is a relation
between the CPU and host architecture (we don't really want to test
anything on an AArch64 host with core2duo CPU). This patch introduces
qemuTestSetHostArch and qemuTestSetHostCPU helpers which will make sure
the host architecture matches the host CPU.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:08 +02:00
Andrea Bolognani
63bc91eea0 tests: Prepare to have different usable GIC versions
Now that we choose the GIC version based on hardware features when
no <gic/> element has been provided, we need a way to fake the GIC
capabilities of the host.

Update the qemuxml2argv and qemuxml2xml tests to allow this.
2016-05-18 11:27:56 +02:00
Ján Tomko
f36c9f7b6c tests: clean up includes
After removing qemuBuildCommandLineCallbacks, testutilsqemu.h does not
need to include qemu_command.h.

Include just qemu_conf.h here and qemu_domain_address.h in files that
need it.
2016-04-13 13:00:53 +02:00
Ján Tomko
0da965c5e0 drop qemuBuildCommandLineCallbacks
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.

Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
2016-04-13 13:00:53 +02:00
Pavel Fedin
f7dd335749 Implement infrastracture for mocking up QEMU capabilities cache
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.

The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-22 13:56:59 +02:00
Pavel Fedin
5b7bf20877 tests: split out common qemu driver initialization
Two utility functions are introduced for proper initialization and
cleanup of the driver.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-22 13:56:59 +02:00
Jiri Denemark
c563b50605 cpu: Add {Haswell,Broadwell}-noTSX CPU models
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-03-26 09:19:59 +01:00
Michal Privoznik
3ecb9e7631 tests: Move qemu caps XML parsing into shared unit
Later on, we the qemu capabilities XML parsing code may come handy so
instead of duplicating the code make the already existing one shared.
By the same time, make the function accept file name instead of XML
document stored already in memory.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-03 12:22:37 +02:00
Eric Blake
3d2b971518 build: skip qemu in tests when !WITH_QEMU
A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:

In file included from ../../src/qemu/qemu_command.h:30:0,
                 from ../../tests/testutilsqemu.h:4,
                 from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"

But since testutilsqemu.c is already conditional, the header
should be likewise.

* tests/testutilsqemu.h: Make content conditional.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-31 11:35:34 -06:00
Osier Yang
3a6204cbbd qemu: Add callback struct for qemuBuildCommandLine
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.

And there might be other places which need to access sysfs files
when building qemu command line in future.

Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.

* src/qemu/qemu_command.h: (New callback struct
                            qemuBuildCommandLineCallbacks;
                            extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
                             callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
2013-05-20 20:14:19 +08:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Jim Meyering
07613d2020 remove all trailing blank lines
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
2009-07-16 15:06:42 +02:00
Daniel P. Berrange
40a82f3066 Make QEMU test suite independant of host OS capabilities 2008-05-16 16:51:30 +00:00