Commit Graph

22 Commits

Author SHA1 Message Date
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Tomáš Ryšavý
239caffb1d tests: Rename virtTestCompareToFile to virTestCompareToFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
401bb813bd Rename virtTestLoadFile to virTestLoadFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Laine Stump
002b7704ff lxc: support <interface type='ethernet'>
This is identical to type='bridge', but without the "connect to a
bridge" part, so it can be handled by using the same functions (and
often even the same cases in switch statements), after renaming
virLXCProcessSetupInterfaceBridged() to virLXCProcessInterfaceTap()
and enhancing it to skip bridge-related items when brname == NULL.

To be truly useful, we need to support setting the ip address on the
host side veth as well as guest side veth (already supported for
type='bridge'), as well as setting the peer address for both.

The <script> element (supported by type='ethernet' in qemu) isn't
supported in this patch. An error is logged at domain start time if it
is encountered. This may be changed in a later patch.
2016-05-24 15:21:05 -04:00
Cole Robinson
1064fb3314 tests: lxcconf2xml: Drop XML blanking
Hardcode a UUID like we did for qemuargv2xml, so we can use standard
comparison helpers, which gives us VIR_TEST_REGENERATE_OUTPUT support
2016-02-17 11:07:21 -05:00
Joao Martins
d239a5427f conf: add caps to virDomainDefFormat*
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
2016-02-04 12:38:26 +00:00
Pavel Hrdina
2d446b6eeb tests: use virtTestDifferenceFull in tests where we have output file
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Pavel Hrdina
1dc38b729b lxc: use virDomainDefPostParse for parsing LXC config string
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:02 +01:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Cédric Bosdonnat
a09bbc024d LXC from native: map vlan network type
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).

lxc.network.type = phys
lxc.network.link = eth0.5

lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
2014-02-12 17:52:47 +00:00
Cédric Bosdonnat
5b8bfb0276 LXC from native: add lxc.cgroup.blkio.* mapping 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
281e2990ee LXC from native: map lxc.cgroup.cpuset.* 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
4f3f7aea6c LXC from native: map lxc.cgroup.cpu.* 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
13b9946eb5 LXC from native: migrate memory tuning 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
99d8cddfbe LXC from native: convert lxc.id_map into <idmap> 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
8e45b88772 LXC from native: convert macvlan network configuration 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
69fc236243 LXC from native: convert phys network types to net hostdev devices 2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
7bfd6e97ec LXC from native: implement no network conversion
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
a41680f8c5 LXC from native: migrate fstab and lxc.mount.entry
Tmpfs relative size and default 50% size values aren't supported as
we have no idea of the available memory at the conversion time.
2014-02-12 17:52:46 +00:00
Cédric Bosdonnat
7195c807b2 LXC driver: started implementing connectDomainXMLFromNative
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.

Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config

It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.

fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.

As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
2014-02-12 17:52:46 +00:00