Commit Graph

463 Commits

Author SHA1 Message Date
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
28f8dfdccc Add MIGRATABLE flag for virDomainGetXMLDesc
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
2012-10-11 15:11:42 +02:00
Daniel P. Berrange
6a7b663203 Fix typo in header file comment
s/mmeory/memory/ in libvirt.h.in

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:38:45 +01:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Laine Stump
01ab659994 network: fix incorrect VIR_NETWORK_UPDATE_COMMAND_* values
These enums originally were put into the flags for virNetworkUpdate,
and when they were moved into their own enum, the numbers weren't
appropriately changed, causing the commands to start with value 2
instead of 1. This causes problems for things like ENUM_IMPL, which
wants a string for every value in the requested range, including those
not used in the enum.
2012-09-19 10:39:31 -04:00
Laine Stump
574b9bc66b network: define new API virNetworkUpdate
This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.
2012-09-18 04:21:32 -04:00
Eric Blake
ef1e024df8 blockjob: add virDomainBlockCommit
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation.  Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.

This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html

Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase).  However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.

For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active

+ These are equivalent:
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
 virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.

+ These are equivalent:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.

+ Similarly:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.

+ This version:
 virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'

* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
2012-09-17 21:28:08 -06:00
Osier Yang
12ad7435de node_memory: Define the APIs to get/set memory parameters
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
  declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
2012-09-17 13:49:44 +08:00
Osier Yang
7a236982fe list: Define new API virConnectListAllSecrets
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
                              and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 13:08:39 +08:00
Osier Yang
6498f76e31 list: Define new API virConnectListAllNWFilters
This is to list the network filter objects. No flags are supported

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
                              and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 12:35:15 +08:00
Osier Yang
c6a3be5dff list: Define new API virConnectListAllNodeDevices
This is to list the node device objects, supports to filter the results
by capability types.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
                              and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 10:30:04 +08:00
Osier Yang
f4af202f4e list: Define new API virConnectListAllInterfaces
This is to list the interface objects, supported filtering flags
are: active|inactive.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
                              and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-12 15:19:46 +08:00
Osier Yang
89a1df9b06 list: Define new API virConnectListAllNetworks
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
                              and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-11 16:58:16 +08:00
Osier Yang
a42eac601e list: Define new API virStoragePoolListAllVolumes
Simply returns the storage volume objects. No supported filter
flags.

include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
                     will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
2012-09-10 10:37:22 +08:00
Jiri Denemark
fc4115e8d6 Add PMSUSPENDED life cycle event
While PMSUSPENDED state was added a long time ago, we didn't have
corresponding life cycle event.
2012-09-07 09:38:22 +02:00
Osier Yang
075c754af0 list: Define new API virStorageListAllStoragePools
This introduces a new API to list the storage pool objects,
4 groups of flags are provided to filter the returned pools:

  * Active or not

  * Autostarting or not

  * Persistent or not

  * And the pool type.

include/libvirt/libvirt.h.in: New enum virConnectListAllStoragePoolFlags;
                              Declare the API.
python/generator.py: Skip the generating
src/driver.h: (virDrvConnectListAllStoragePools)
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol.
2012-09-06 21:58:36 +08:00
Michal Privoznik
aa3e8bd4ca Introduce new VIR_ERR_AGENT_UNRESPONSIVE error code
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
2012-08-27 18:00:10 +02:00
MATSUDA Daiki
847fc9945e agent: add virDrvDomainQemuAgentCommand prototype for drivers.
Add virDrvDomainQemuAgentCommand prototype for drivers.
Add virDomainQemuAgentCommand() for virDrvDomainQemuAgentCommand.

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 18:13:15 +08:00
MATSUDA Daiki
05447e3af4 agent : add @seconds variable to qemuAgentSend().
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 17:55:33 +08:00
Hu Tao
e051c482aa new interface to control emulator_period/emulator_quota
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
2012-08-22 16:56:41 +08:00
Tang Chen
c152bf9425 Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions.
Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
2012-08-22 16:20:13 +08:00
Peter Krempa
1193fc5f44 libssh2_transport: add main libssh2 transport implementation
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
2012-08-21 14:47:09 +02:00
Marcelo Cerri
2f8a09fbce Update the remote API
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.

Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
2012-08-20 19:14:30 +02:00
Shradha Shah
f9150c8158 conf: move DevicePCIAddress functions to separate file
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
2012-08-17 15:43:25 -04:00
Osier Yang
01aa172cb8 Fix the indentions of libvirt.h.in
Substitute 2 spaces with 4 spaces instead.
2012-08-17 22:58:23 +08:00
Peter Krempa
e9a24e3e3d virterror: Add error message for unsupported operations.
This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.

The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output

instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec
2012-08-11 10:03:00 +02:00
Dmitry Guryanov
cafc26ff5f parallels: add driver skeleton
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-01 11:44:26 +08:00
Daniel P. Berrange
6ed5a1b9bd Add public API to register a callback to be invoked on connection close
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-30 10:08:40 +01:00
Peter Krempa
d6e94bdd3d lib: Revert removing of Summary and Description fields in headers
Those fields are used by the apibuild script to create documentation.
This commit partialy reverts a4bcefbcff.
2012-07-27 15:47:16 +02:00
Osier Yang
a4bcefbcff maint: Use consistent copyright.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.

And deserts the outdated comments like:

 * libvirt-qemu.h:
 * Summary: qemu specific interfaces
 * Description: Provides the interfaces of the libvirt library to handle
 *              qemu specific methods
 *
 * Copy:  Copyright (C) 2010, 2012 Red Hat, Inc.

Uses the more compact style like:

 * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
 *
 * Copyright (C) 2010, 2012 Red Hat, Inc.
2012-07-27 18:27:21 +08:00
Guido Günther
a91067fa0d Add virDomainGetHostname
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
2012-07-20 21:54:34 +02:00
Daniel P. Berrange
7ed6d7dda7 Define public API for receiving guest memory balloon events
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this

* include/libvirt/libvirt.h.in: Define the
  virConnectDomainEventBalloonChangeCallback callback
  and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
  python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
  examples/domain-events/events-python/event-test.py: Add
  example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
  of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
  balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-14 16:02:26 +08:00
Michal Privoznik
8d27005b50 storage: Introduce --inactive for pool-dumpxml
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
2012-06-25 13:23:28 +02:00
Eric Blake
37bb0447bb list: add virDomainListAllSnapshots API
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr.  It
was also an awkward name: the function operates on domains, not
domain snapshots.  virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.

This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.

* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
2012-06-19 13:50:03 -06:00
Eric Blake
5873f2e2da snapshot: add additional filters when getting lists
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups.  For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.

Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.

* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
2012-06-19 13:50:03 -06:00
Peter Krempa
747f64eeaf lib: Add public api to enable atomic listing of guest
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:

1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.

2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.

3) The returned list is auto-allocated. This saves a lot of hassle for
the users.

4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.

Available filter groups:
    Domain status:
    VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE

    Domain persistence:
    VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
    VIR_CONNECT_LIST_DOMAINS_TRANSIENT

    Domain state:
    VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
    VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER

    Existence of managed save image:
    VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
    VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE

    Auto-start option:
    VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
    VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART

    Existence of snapshot:
    VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
    VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT

5) The python binding returns a list of domain objects that is very neat
to work with.

The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.

*include/libvirt/libvirt.h.in: - add API prototype
                               - clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
                        api
*src/driver.h: - add driver prototype
               - clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
2012-06-18 21:24:13 +02:00
Wen Congyang
cdef31c562 qemu: allow the client to choose the vmcore's format
This patch updates qemu driver to allow the client to choose the
vmcore's format: memory only or including device state.
2012-06-15 20:36:14 +08:00
Eric Blake
2e13b9ab3c snapshot: new query APIs
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.

Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.

Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.

* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
2012-06-11 10:43:03 -06:00
Eric Blake
9d08debe88 snapshot: add virDomainSnapshotRef API
virDomainSnapshotPtr has a refcount member, but no one was able
to use it.  Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method.  Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is!  (I have future patches to virsh
that want to use it.)

* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
2012-06-08 10:32:36 -06:00
Daniel P. Berrange
1cc2034a72 Add sentinel for virErrorDomain enum
Add a VIR_ERR_DOMAIN_LAST sentinel for virErrorDomain and
replace the virErrorDomainName function by a VIR_ENUM_IMPL

In the process the naming of error domains is sanitized

* src/util/virterror.c: Use VIR_ENUM_IMPL for converting
  error domains to strings
* include/libvirt/virterror.h: Add VIR_ERR_DOMAIN_LAST
2012-05-24 16:20:55 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Hu Tao
d29a7aaa1a Add a new param 'vcpu_time' to virDomainGetCPUStats
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:

  1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
     domain
  2. hypervisor: `total cpu usage' - `vcpu usage'

The param 'vcpu_time' is for getting vcpu usages.
2012-05-17 12:42:06 -06:00
Eric Blake
3648469258 blockjob: add new API flags
This patch introduces a new block job, useful for live storage
migration using pre-copy streaming.  Justification for including
this under virDomainBlockRebase rather than adding a new command
includes: 1) there are now two possible block jobs in qemu, with
virDomainBlockRebase starting either type of command, and
virDomainBlockJobInfo and virDomainBlockJobAbort working to end
either type; 2) reusing this command allows distros to backport
this feature to the libvirt 0.9.10 API without a .so bump.

Note that a future patch may add a more powerful interface named
virDomainBlockJobCopy, dedicated to just the block copy job, in
order to expose even more options (such as setting an arbitrary
format type for the destination without having to probe it from a
pre-existing destination file); adding a new command for targetting
just block copy would be similar to how we already have
virDomainBlockPull for targetting just the block pull job.

Using a live VM with the backing chain:
  base <- snap1 <- snap2
as the starting point, we have:

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY)
creates /path/to/copy with the same format as snap2, with no backing
file, so entire chain is copied and flattened

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
creates /path/to/copy as a raw file, so entire chain is copied and
flattened

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
creates /path/to/copy with the same format as snap2, but with snap1 as
a backing file, so only snap2 is copied.

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT)
reuse existing /path/to/copy (must have empty contents, and format is
probed[*] from the metadata), and copy the full chain

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
reuse existing /path/to/copy (contents must be identical to snap1,
and format is probed[*] from the metadata), and copy only the contents
of snap2

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_SHALLOW|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
reuse existing /path/to/copy (must be raw volume with contents
identical to snap1), and copy only the contents of snap2

Less useful combinations:

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW|
    VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
fail if source is not raw, otherwise create /path/to/copy as raw and
the single file is copied (no chain involved)

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
makes little sense: the destination must be raw but have no contents,
meaning that it is an empty file, so there is nothing to reuse

The other three flags are rejected without VIR_DOMAIN_BLOCK_COPY.

[*] Note that probing an existing file for its format can be a security
risk _if_ there is a possibility that the existing file is 'raw', in
which case the guest can manipulate the file to appear like some other
format.  But, by virtue of the VIR_DOMAIN_BLOCK_REBASE_COPY_RAW flag,
it is possible to avoid probing of raw files, at which point, probing
of any remaining file type is no longer a security risk.

It would be nice if we could issue an event when pivoting from phase 1
to phase 2, but qemu hasn't implemented that, and we would have to poll
in order to synthesize it ourselves.  Meanwhile, qemu will give us a
distinct job info and completion event when we either cancel or pivot
to end the job.  Pivoting is accomplished via the new:

virDomainBlockJobAbort(dom, disk, VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT)

Management applications can pre-create the copy with a relative
backing file name, and use the VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT
flag to have qemu reuse the metadata; if the management application
also copies the backing files to a new location, this can be used
to perform live storage migration of an entire backing chain.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_TYPE_COPY):
New block job type.
(virDomainBlockJobAbortFlags, virDomainBlockRebaseFlags): New enums.
* src/libvirt.c (virDomainBlockRebase): Document the new flags,
and implement general restrictions on flag combinations.
(virDomainBlockJobAbort): Document the new flag.
(virDomainSaveFlags, virDomainSnapshotCreateXML)
(virDomainRevertToSnapshot, virDomainDetachDeviceFlags): Document
restrictions.
* include/libvirt/virterror.h (VIR_ERR_BLOCK_COPY_ACTIVE): New
error.
* src/util/virterror.c (virErrorMsg): Define it.
2012-04-23 07:44:29 -06:00
Daniel P. Berrange
2223ea984c The policy kit and HAL node device drivers both require a
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.

The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.

Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
2012-04-19 17:03:10 +01:00
Adam Litke
a696f8b71a blockjob: add API for async virDomainBlockJobAbort
Block job cancellation can take a while.  Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:

A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt.  Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel).  Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).

A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API.  When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.

This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-04-11 20:52:18 -06:00
Eric Blake
4d5533ca87 snapshot: add atomic create flag
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.

This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group.  If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.

There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure.  However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
2012-03-23 16:38:20 -06:00
Eric Blake
9b6860f5ce build: fix incorrect enum declaration
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags

* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
2012-03-23 14:29:00 -06:00
Osier Yang
7c5a0c94e4 qemu: Update domain status to running while wakeup event is emitted
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.

While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
2012-03-23 23:12:29 +08:00
Osier Yang
54d9026a2c New domain state pmsuspended
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
2012-03-23 23:12:22 +08:00
Osier Yang
487c063381 Add support for the suspend event
This patch introduces a new event type for the QMP event
SUSPEND:

    VIR_DOMAIN_EVENT_ID_PMSUSPEND

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
                                        virDomainPtr dom,
                                        int reason,
                                        void *opaque);

"reason" is unused currently, always passes "0".
2012-03-23 23:12:18 +08:00