We don't know enough about quality of external libraries used
for non-UNIX transports, nor do we want to spawn external
commands when setuid. Restrict to the bare minimum which is
UNIX transport for local usage. Users shouldn't need to be
running setuid if connecting to remote hypervisors in any
case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The return values for the virConnectListAllSecrets call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNWFilters call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNodeDevices call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllInterfaces call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNetworks call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virStoragePoolListAllVolumes call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllStoragePools call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllDomains call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomain{SnapshotListAllChildren,ListAllSnapshots}
calls were not bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomainGetJobStats call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameters for the virDomainMigrate*Params RPC calls were
not bounds checks, meaning a malicious client can cause libvirtd
to consume arbitrary memory
This issue was introduced in the 1.1.0 release of libvirt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Valgrind defects memory error:
==16759== 1 errors in context 1 of 8:
==16759== Invalid free() / delete / delete[] / realloc()
==16759== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Address 0xe1394a0 is not stack'd, malloc'd or (recently) free'd
==16759== 1 errors in context 2 of 8:
==16759== Conditional jump or move depends on uninitialised value(s)
==16759== at 0x4A07477: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Uninitialised value was created by a stack allocation
==16759== at 0x4D7F120: remoteDomainCreateWithFlags (remote_driver.c:2423)
How to reproduce?
# virsh start <domain> --paused
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=994855
Signed-off-by: Alex Jia <ajia@redhat.com>
In the following commit:
commit 03d813bbcd
Author: Marek Marczykowski <marmarek@invisiblethingslab.com>
Date: Thu May 23 02:01:30 2013 +0200
remote: fix dom->id after virDomainCreateWithFlags
The virDomainCreateWithFlags remote client helper was made to
invoke REMOTE_PROC_DOMAIN_LOOKUP_BY_UUID to refresh the 'id'
of the domain, following the pattern used in the previous
virDomainCreate method impl.
The remote protocol for virDomainCreateWithFlags though did
actually fix the design flaw in virDomainCreate, by directly
returning the new domain info. For some reason, this data was
never used. So we can just use that data now instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since they make use of file descriptor passing, the remote protocol
methods for virDomainCreate{XML}WithFiles must be written by hand.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the password authentication in the libssh2 connection
driver. There are a few benefits to this step:
1) Hosts with challenge response authentication will now be supported
with the libssh2 connection driver.
2) Credential for hosts can now be stored in the authentication
credential config file
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Found while trying to cross-compile to mingw:
CC libvirt_driver_remote_la-remote_driver.lo
../../src/remote/remote_driver.c: In function 'doRemoteOpen':
../../src/remote/remote_driver.c:487:23: error: variable 'verify' set but not used [-Werror=unused-but-set-variable]
* src/remote/remote_driver.c (doRemoteOpen): Also ignore 'verify'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Without the socket path explicitly specified, the remote driver tried to
connect to the "/system" instance socket even if "/session" was
specified in the uri. With this patch this configuration now produces an
error.
It is still possible to initiate a session connection with specifying
the path to the socket manually and also manually starting the session
daemon. This was also possible prior to this patch,
This is a minimal fix. We may decide to support remote session
connections using ssh but this will require changes to the remote driver
code so this fix shouldn't cause regressions in the case we decide to do
that.
The same issue as (already fixed) in virDomainCreate -
REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS doesn't return new domain ID, only
-1 on error or 0 on success.
Besides this one fix it is more general problem - local domain object
ID can desynchronize with the real one, for example in case of another
client creates/destroys domain in the meantime. Perhaps virDomainGetID
should be called remotely (with all performance implications...)? Or
some event-based notification used?
Signed-off-by: Marek Marczykowski <marmarek@invisiblethingslab.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
This requires a custom function for remoteNodeDeviceDetachFlags,
because it is named *NodeDevice, but it goes through the hypervisor
driver rather than nodedevice driver, and so it uses privateData
instead of nodeDevicePrivateData. (It has to go through the hypervisor
driver, because that is the driver that knows about the backend drivers
that will perform the pci device assignment).
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of the remote procedure names did not match the
corresponding API names. For example, many lacked the
word 'CONNECT', others re-arranged the names. Update the
procedures so their names exactly match the API names.
Then remove the special case handling of these APIs in
the generator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The last Viktor's effort to fix the race and memory corruption unfortunately
wasn't complete in the case the close callback was not registered in an
connection. At that time, the trail of event's that I'll describe later could
still happen and corrupt the memory or cause a crash of the client (including
the daemon in case of a p2p migration).
Consider the following prerequisities and trail of events:
Let's have a remote connection to a hypervisor that doesn't have a close
callback registered and the client is using the event loop. The crash happens in
cooperation of 2 threads. Thread E is the event loop and thread W is the worker
that does some stuff. R denotes the remote client.
1.) W - The client finishes everything and sheds the last reference on the client
2.) W - The virObject stuff invokes virConnectDispose that invokes doRemoteClose
3.) W - the remote close method invokes the REMOTE_PROC_CLOSE RPC method.
4.) W - The thread is preempted at this point.
5.) R - The remote side receives the close and closes the socket.
6.) E - poll() wakes up due to the closed socket and invokes the close callback
7.) E - The event loop is preempted right before remoteClientCloseFunc is called
8.) W - The worker now finishes, and frees the conn object.
9.) E - The remoteClientCloseFunc accesses the now-freed conn object in the
attempt to retrieve pointer for the real close callback.
10.) Kaboom, corrupted memory/segfault.
This patch tries to fix this by introducing a new object that survives the
freeing of the connection object. We can't increase the reference count on the
connection object itself or the connection would never be closed, as the
connection is closed only when the reference count reaches zero.
The new object - virConnectCloseCallbackData - is a lockable object that keeps
the pointers to the real user registered callback and ensures that the
connection callback is either not called if the connection was already freed or
that the connection isn't freed while this is being called.
remoteDeserializeTypedParameters can now be called with either
preallocated params array (size of which is announced by nparams) or it
can allocate params array according to the number of parameters received
from the server.
Like virNodeDeviceCreateXML, virNodeDeviceLookupSCSIHostByWWN
has to be treated specially when generating the RPC codes. Also
new rules are added in fixup_name to keep the name SCSIHostByWWN.
Upon successful return of virNetClientStreamEventAddCallback() the
allocated cbdata field will be freed by virNetClientStreamEventRemoveCallback()
as cbOpaque using the free function remoteStreamCallbackFree().
