Adding the PKI path that is used as default suggestion in src/qemu/qemu.conf
If people use non-default paths they should use local overrides but the
suggested defaults we should open up.
This is the default path as referenced by src/qemu/qemu.conf in libvirt.
While doing so merge the several places we have to cover PKI access into
one.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1690140
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Allows (multi-arch enabled) access to libraries under the
/usr/lib/@{multiarch}/qemu/*.so path in the Debian/Ubuntu
qemu-block-extra package and all such libs for the paths
of rpm qemu-block-* packages.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1554761
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Prevent denial messages related to attempted reads on lttng
files from spamming the logs.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1432644
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On live migration with --p2p like:
$ virsh migrate --live --p2p kvmguest-bionic-normal \
qemu+ssh://10.6.221.80/system
We hit an apparmor deny like:
apparmor="DENIED" operation="file_inherit"
profile="/usr/sbin/libvirtd" pid=23477 comm="ssh" family="unix"
sock_type="stream" protocol=0 requested_mask="send receive"
denied_mask="send" addr=none peer_addr=none peer="unconfined"
The rule is not perfect, but can't be restricted further at the moment
(new upstream kernel features needed). For now the lack of a profile on the
peer as well as comm not being a conditional on rules do not allow to filter
further.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
virt-aa-helper needs read access to the disk image to resolve symlinks
and add the proper rules to the profile. Its profile whitelists a few
common paths, but users can place their images anywhere.
This commit helps users allowing access to their images by adding their
own rules in apparmor.d/local/usr.lib.libvirt.virt-aa-helper.
This commit also adds rules to allow reading files named:
- *.raw as this is a rather common disk image extension
- /run/libvirt/**[vd]d[a-z] as these are used by virt-sandbox
Noticed the following denial in audit.log when shutting down
an apparmor confined domain
type=AVC msg=audit(1512002299.742:131): apparmor="DENIED"
operation="open" profile="libvirt-66154842-e926-4f92-92f0-1c1bf61dd1ff"
name="/proc/1475/cmdline" pid=2958 comm="qemu-system-x86"
requested_mask="r" denied_mask="r" fsuid=469 ouid=0
Squelch the denial by allowing read access to /proc/<pid>/cmdline.
Since qemu 2.9 via 9103f1ce "file-posix: Consider max_segments for
BlockLimits.max_transfer" this is a new access that is denied by the
qemu profile.
It is non fatal, but prevents the fix mentioned to actually work.
It should be safe to allow reading from that path.
Since qemu opens a symlink path we need to translate that for apparmor from
"/sys/dev/block/*/queue/max_segments" to
"/sys/devices/**/block/*/queue/max_segments"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
In bf3a4140 "virt-aa-helper: fix libusb access to udev usb data" the
libusb access to properly detect the device/bus ids was fixed.
The path /run/udev/data/+usb* contains a subset of that information we
already allow to be read and are currently not needed for the function
qemu needs libusb for. But on the init of libusb all those files are
still read so a lot of apparmor denials can be seen when using usb host
devices, like:
apparmor="DENIED" operation="open" name="/run/udev/data/+usb:2-1.2:1.0"
comm="qemu-system-x86" requested_mask="r" denied_mask="r"
Today we could silence the warnings with a deny rule without breaking
current use cases. But since the data in there is only a subset of those
it can read already it is no additional information exposure. And on the
other hand a future udev/libusb/qemu combination might need it so allow
the access in the default apparmor profile.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Commit b482925c added ptrace rule for the apparmor profiles,
but one was missed in the libvirtd profile for dnsmasq. It was
overlooked since the test machine did not have an active libvirt
network requiring dnsmasq that was also set to autostart. With
one active and set to autostart, the following denial is observed
in audit.log when restarting libvirtd
type=AVC msg=audit(1507320136.306:298): apparmor="DENIED" \
operation="ptrace" profile="/usr/sbin/libvirtd" pid=5472 \
comm="libvirtd" requested_mask="trace" denied_mask="trace" \
peer="/usr/sbin/dnsmasq"
With an active network, I suspect a libvirtd restart causes access
to /proc/<dnsmasq-pid>/*, hence the resulting denial. As a nasty
side affect of the denial, libvirtd thinks it needs to spawn a
dnsmasq process even though one is already running for the network.
E.g. after two libvirtd restarts
dnsmasq 1683 0.0 0.0 51188 2612 ? S 12:03 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
root 1684 0.0 0.0 51160 576 ? S 12:03 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
dnsmasq 4706 0.0 0.0 51188 2572 ? S 13:54 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
root 4707 0.0 0.0 51160 572 ? S 13:54 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
dnsmasq 4791 0.0 0.0 51188 2580 ? S 13:56 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
root 4792 0.0 0.0 51160 572 ? S 13:56 0:00 \
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf \
--leasefile-ro --dhcp-script=/usr/lib64/libvirt/libvirt_leaseshelper
A simple fix is to add a ptrace rule for dnsmasq.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-By: Guido Günther <agx@sigxcpu.org>
libusb as used by qemu needs to read data from /run/udev/data/ about usb
devices. That is read once on the first initialization of libusb_init by
qemu.
Therefore generating just the device we need would not be sufficient as
another hotplug later can need another device which would fail as the
data is no more re-read at this point.
But we can restrict the paths very much to just the major number of
potential usb devices which will make it match approximately the detail
that e.g. an lsusb -v would reveal - that is much safer than the
"/run/udev/data/* r" blanket many users are using now as a workaround.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up VncTLS according to the official Libvirt documentation,
only one certificate for libvirt/libvirt-vnc is used. The document
indicates to use the following directories :
/etc/pki/CA
/etc/pki/libvirt
/etc/pki/libvirt/private
in order to manage the certificates used by libvirt-vnc.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/901272
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On Debian/Ubuntu the libxl-save-helper (used when saving/restoring
a domain through libxl) is located under /usr/lib/xen-<version>/bin.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1334195
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Updates profile to allow running on ppc64el.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1374554
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The split firmware and variables files introduced by
https://bugs.debian.org/764918 are in a different directory for
some reason. Let the virtual machine read both.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add explicit denies for disk devices to avoid cluttering dmesg with
(acceptable) denials.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Guido Günther <agx@sigxcpu.org>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For instance:
hellolibvirt/hellolibvirt.c: In function 'showDomains':
hellolibvirt/hellolibvirt.c💯19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < numNames; i++) {
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to a missing entries in Makefile, we were not distributing
all the systemtap scripts we have.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
On error, asprintf returns -1 and the contents of the string
pointer is undefined. In the rest of the libvirt code,
the virAsprintf wrapper takes care of that.
Check the return value and report a generic error, since we
purposefully avoid linking to virutil.
Some of the examples make use of asprintf and strtol functions (to keep
things simple) which are prohibited to use within our code (enforced by
syntax-check). Therefore besides adding some examples, this patch also updates
cfg.mk to exclude examples directory from asprintf and strtol rules, as well as
updates .gitignore to exclude all the new admin binaries created in the
'examples' dir.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
