Commit Graph

187 Commits

Author SHA1 Message Date
Ján Tomko
bcbb026993 tests: qemu: use g_autoptr where possible
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-08-03 07:23:46 +02:00
Ján Tomko
845fee02c1 tests: qemu: use g_autofree where possible
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-08-03 07:23:46 +02:00
Michal Privoznik
b150fbc4fe qemuhotplugtest: Free monitor iff successfully initialized
If initializing test monitor in testQemuHotplugCpuPrepare()
fails, the control jumps to error label where
testQemuHotplugCpuDataFree() is called. But since the data->mon
is NULL due to aforementioned failure,
qemuMonitorTestGetMonitor() dereferences a NULL pointer leading
to a SIGSEGV.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-06-29 12:38:22 +02:00
Peter Krempa
18e9806c64 testQEMUSchemaLoad: Rename to testQEMUSchemaLoadLatest
It always loads the latest schema. Prepare for loading others as well.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-05-20 09:41:58 +02:00
Peter Krempa
2700779f6f testQemuHotplugCpuPrepare: Allow deprecated commands for non-modern cpu hotplug test
We have a few cases validating that the code behaves correctly in
pre-modern hotplug era. This is controled by the 'modern' flag for the
test. Since 'cpu-add' command is now deprecated in qemu, there is a
modern replacement for it, and the test output is checked against
expected commands we can skip schema validation for the legacy command.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-05-20 08:53:29 +02:00
Peter Krempa
3b78d28974 testQemuHotplugCpuPrepare: Allow unused monitor commands only on failure
Only tests expected to fail should allow unused commads as the normal
tests will consume all of them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-05-20 08:53:29 +02:00
Andrea Bolognani
2e93af279a Revert "tests: Use qemu:///embed to simplify fakerootdir management"
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.

On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.

This reverts commit d98cc1968e.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2020-05-07 22:31:04 +02:00
Andrea Bolognani
d98cc1968e tests: Use qemu:///embed to simplify fakerootdir management
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-05-07 19:20:56 +02:00
Andrea Bolognani
eea5d63a22 tests: Introduce virhostdevmock
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.

That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:

  Could not initialize HostdevManager - operation failed: Failed
  to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-05-06 16:24:31 +02:00
Peter Krempa
4e7f8ba0f3 qemumonitortestutils: Enforce consumption of all items in test monitor
To prevent unexpected situations where a change in code would stop
looking at some of the tested commands go unnoticed add a mechanism to
force consumption of all test items.

Since there are a few tests which would be hard to fix add also a
mechanism to opt-out of the check.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-27 08:30:27 +02:00
Peter Krempa
0bb29de6ba qemuhotplugtest: Remove 'drive_del' expectation from failed cases
On failure 'drive_del' is not issued.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-27 08:13:52 +02:00
Peter Krempa
1f3ce96e70 qemuhotplugtest: cpu: x86-modern-individual: Remove invalid test case
One of the test cases attempted to use test data meant for modern qemu
without asserting the 'modern' flag. Since that changes the commands
used to query state it won't work with data meant for the modern case.

Remove the invalid test case.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-27 08:12:48 +02:00
Peter Krempa
3e9784a01b qemuhotplugtest: detach: Add expected 'object-del' to disk-scsi-multipath case
The test verifies unplug of a disk with the persistent reservations
helper. The 'object-del' used to remove the helper was not mentioned in
the list of expected commands.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-27 08:12:48 +02:00
Peter Krempa
e2f1e2687f qemuhotplugtest: detach: Remove commands which are not issued
The 'human-monitor-command' equates to the 'drive-del' command issued by
the hotplug code on successful detach of a device. This means that it's
not issued for failed attempts and thus should not be added to the
expected list. Unfortunately our test monitor doesn't ensure that all
expected commands were consumed.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-23 15:57:36 +02:00
Daniel P. Berrangé
46e16b553d tests: fix double unlock of monitor in hotplug test
The qemuMonitorTestNew() function returns with the monitor object
locked, and expects it to still be locked when qemuMonitorTestFree
is called.  The qemuhotplug test, however, explicitly unlocks the
monitor, but then forgets to lock it again. As a result the
qemuMonitorTestFree function is unlocking a mutex it doesn't own.

This bug has existed forever, but since we use normal POSIX mutexes
and don't check the return value of pthread_mutex_lock/unlock we
didn't see the error. It was harmless until the switch to the per
monitor event loop which requires the thread synchronization to
work reliably, whereupon it started crashing.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-03-13 11:27:57 +00:00
Michal Privoznik
a30078cb83 qemu: Create multipath targets for PRs
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].

1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2020-03-12 08:04:40 +01:00
Peter Krempa
7b62dfc737 qemuhotplugtestcpus: Always use 'query-cpus-fast'
Use the new command in the test suite by asserting the capability
and adjusting test data to the correct field names as they changed
compared to 'query-cpus'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-03-05 11:31:38 +01:00
Collin Walling
6523a7ea5d qemumonitorjsontest: load schema based on specified arch
There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).

Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-02-21 10:50:10 +01:00
Christian Ehrhardt
e4e62941f2
test: let qemuhotplugtest report details of init fails
If virHostdevManagerGetDefault in qemuhotplugtest fails it works
for quite a while to later segfault when accessing
mgr->activePCIHostdevs.

Report the error details and break on a failed init to see the
real issue right away.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2020-01-22 10:51:52 +02:00
Daniel P. Berrangé
2c33532423 src: switch to use g_setenv/g_unsetenv
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Daniel Henrique Barboza
c19bb8c0cf qemu: command: move qemuBuildGraphicsSPICECommandLine validation to qemu_domain.c
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.

This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.

All other tests were adapted to consider SPICE validation in this
earlier stage.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-16 17:51:26 -05:00
Daniel Henrique Barboza
45270337f0 qemu: command: move qemuBuildGraphicsVNCCommandLine validation to qemu_domain.c
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.

Tests were adapted to consider SDL validation in this earlier stage.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-16 17:51:23 -05:00
Daniel Henrique Barboza
3b32de2297 qemu: command: move qemuBuildPMCommandLine validation to qemu_domain.c
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.

Tests were adapted to consider the new caps being needed in
this earlier stage.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-16 17:51:06 -05:00
Ján Tomko
20071c9f99 Remove redundant usage of WITH_YAJL
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.

Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-13 14:57:32 +01:00
Daniel P. Berrangé
24d87d2e88 conf: drop virCapsPtr param from domain APIs for copying config
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
bf9d812956 conf: drop virCapsPtr param from domain parse APIs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
61bff77bf9 conf: drop virCapsPtr param from domain formatting APIs
This parameter is now unused and can be removed entirely.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
92d412149c conf: sanitize virDomainObjFormat & virDomainDefFormat* APIs
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Daniel Henrique Barboza
3a085d221e tests: remove unneeded cleanup labels
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-19 15:22:43 +01:00
Michal Privoznik
9e4445ebc3 tests: Mock access to /dev/kvm
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.

Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-15 11:56:46 +01:00
Ján Tomko
ef88698668 Use g_mkdtemp instead of mkdtemp
Prefer the GLib version to the one from gnulib.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-14 19:02:31 +01:00
Jonathon Jongsma
b964735609 qemu: Set capabilities properly for tests
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-11-14 11:37:50 -05:00
Daniel Henrique Barboza
2fe78a833e qemu: Remove qemu_hotplugpriv.h and qemuDomainRemoveDeviceWaitTime
qemu_hotplugpriv.h is a header file created to share a global variable
called 'qemuDomainRemoveDeviceWaitTime', declared in qemu_hotplug.c,
to other files that would want to change the timeout value
(currently, only tests/qemuhotplugtest.c).

Previous patch deprecated the variable, using qemu_driver->unplugTimeout
to set the timeout instead. This means that the header file is now
unused, and can be safely discarded.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-13 15:03:40 -05:00
Daniel Henrique Barboza
e03e27ee08 qemu_hotplug.c: adding qemuDomainGetUnplugTimeout
For some architectures and setups, device removal can take
longer than the default 5 seconds. This results in commands
such as 'virsh setvcpus' to fire timeout messages even if
the operation were successful in the guest, confusing the
user.

This patch sets a new 10 seconds unplug timeout for PPC64
guests. All other archs will keep the default 5 seconds
timeout.

Instead of putting 'if PPC64' conditionals inside qemu_hotplug.c
to set the new timeout value, a new function called
qemuDomainGetUnplugTimeout was added. The timeout value is then
retrieved when needed, by passing the correspondent DomainDef
object. This approach allows for different guest architectures
to have distint unplug timeout intervals, regardless of the
host architecture. This design also makes it easier to
modify/enhance the unplug timeout logic in the future
(allow for special timeouts for TCG domains, for example).

A new mock file was created to work with qemuhotplugtest.c,
given that the test timeout is significantly shorter than
the actual timeout value in qemu_hotplug.c.

The now unused 'qemuDomainRemoveDeviceWaitTime' global can't
be simply erased from qemu_hotplug.c though. Next patch will
remove it properly.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-13 15:03:40 -05:00
Michal Privoznik
4fa804c0c7 tests: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
John Ferlan
2669edabd3 tests: Fix memory leak in mymain
Commit 944a35d7f0 added @fakerootdir; however, there are multiple
paths out of mymain that didn't free the memory - so just use the
g_autofree to resolve the potential leak.

Found by Coverity

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-06 11:27:12 -05:00
Ján Tomko
29b1e859e3 tests: use g_strdup instead of VIR_STRDUP
Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:59 +02:00
Ján Tomko
45678bd70a Use g_autoptr instead of VIR_AUTOPTR
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Daniel P. Berrangé
2c535e50f5 util: remove some no-op thread functions
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:

  commit 0240d94c36
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Jan 22 16:17:10 2014 +0000

      Remove windows thread implementation in favour of pthreads

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-19 12:50:21 +01:00
Shivaprasad G Bhat
944a35d7f0 tests: Add test case for QEMU pci-hostdev hotplug
This patch adds hostdev test cases in qemuhotplugtest.c.

Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Michal Privoznik
e3511ee5ec tests: Always put '\n' at the end of VIR_TEST_VERBOSE
Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-27 15:56:17 +02:00
Jiri Denemark
b449c27041 qemu: Pass correct qemuCaps to virDomainDeviceDefPostParse
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.

QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-09 13:55:54 +02:00
Jiri Denemark
bbcfa07bea qemu: Pass correct qemuCaps to virDomainDefCopy
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.

Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-09 13:55:54 +02:00
Ján Tomko
466764346d qemu: domain: remove monJSON field
If we have a monitor, it is a JSON monitor.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-06-20 13:47:41 +02:00
Ján Tomko
6806051078 tests: always assume JSON in qemuMonitorTestNew
Now that all the callers call qemuMonitorTestNew with json=true,
remove the argument and always assume JSON.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-17 16:12:57 +02:00
Peter Krempa
6f15c82fda tests: qemuhotplug: Use schema testing with qemuMonitorTestNewFromFileFull
Pass in the schema since it works with the 'file' test now.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-06-07 16:18:46 +02:00
Peter Krempa
1a77e0032b tests: Allow QMP schema testing in qemuMonitorTestNewFromFileFull
Pass in the schema data from the caller if QMP schema testing is
desired.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-06-07 16:18:45 +02:00
Michal Privoznik
ee2c5ef39f qemuhotplugtest: Don't plug a SCSI disk at unit 7
Unit number 7 is kind of special. It's reserved for SCSI
controller. The comment in virDomainSCSIDriveAddressIsUsed()
summarizes that pretty nicely. Libvirt would never generate
such address.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-04-18 17:08:33 +02:00
Laine Stump
d3aab99096 test: replace calls to individual detach functions with one call to main detach
The individual qemuDomainDetach*Device() functions will soon be "less
functional", since some of the code that is duplicated in 10 of the 12
detach functions is going to be moved into the common
qemuDomainDetachDeviceLive(), which calls them all.

qemuhotplugtest.c is the only place any of these individual functions
is called other than qemuDomainDetachDeviceLive() itself. Fortunately,
qemuDomainDetachDeviceLive() provides exactly the functionality needed
by the test driver (except that it supports detach of more device
types than the test driver has tests for).

This patch replaces the calls to
qemuDomainDetach(Chr|Shmen|Watchdog|Disk)Device with a single call to
the higher level function, allowing us to shift functionality between
the lower level functions without breaking the tests.

Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-03-26 11:05:03 -04:00
Michal Privoznik
17ddfd420a qemuhotplugtest: Test guestfwd attach and detach
Previous two commits demonstrate a hole in our test scenario.
Fix that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-14 09:22:17 +01:00
Peter Krempa
8c191a9061 qemu: caps: Always assume QEMU_CAPS_DEVICE_DEL_EVENT
DEVICE_DELETED was added in qemu commit 0402a5d65ec00 which was released
in v1.5.0.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 10:11:20 +01:00
Peter Krempa
458a3453da tests: qemuhotplug: Remove leftovers for non-event testing
DO_TEST_ATTACH and DO_TEST_ATTACH_EVENT now do the same thing so we can
remove the latter including the infrastructure.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 10:11:20 +01:00
Peter Krempa
eaaecd9f55 tests: qemuhotplug: Use DEVICE_DELETED event in all hotunplug tests
Currently all supported qemu versions now have support for the
DEVICE_DELETED event. This means that testing the old approach is a
waste of time.

Always add the QEMU_CAPS_DEVICE_DEL_EVENT capability in the hotplug test
and fix existing test cases.

The 'disk-virtio', 'disk-usb', 'disk-scsi', and 'disk-scsi-2' already
had variants that used the event, so the non-event variants will be
removed.

For all other cases the QMP_DEVICE_DELETED macro is used to add the
correct reply.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 10:11:20 +01:00
Peter Krempa
e29ae70ba7 tests: qemuhotplug: Remove unused test macro DO_TEST_DETACH_EVENT
This variant is unused as we create the object including capabilities
with DO_TEST_ATTACH_EVENT, which is then reused.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 10:11:20 +01:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
4cfd709021 Fix many mistakes & inconsistencies in header file layout
This introduces a syntax-check script that validates header files use a
common layout:

  /*
   ...copyright header...
   */
  <one blank line>
  #ifndef SYMBOL
  # define SYMBOL
  ....content....
  #endif /* SYMBOL */

For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:

  #ifndef SYMBOL_ALLOW
  # error ....
  #endif /* SYMBOL_ALLOW */
  <one blank line>

The many mistakes this script identifies are then fixed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:46:53 +00:00
Peter Krempa
f479b34245 Revert "qemu: hotplug: consolidate media change code paths"
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.

This reverts commit 663b1d55de.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-10-08 12:37:07 +02:00
Peter Krempa
663b1d55de qemu: hotplug: consolidate media change code paths
Use qemuDomainAttachDeviceDiskLive to change the media in
qemuDomainChangeDiskLive as the former function already does all the
necessary steps to prepare the new medium.

This also allows us to turn qemuDomainChangeEjectableMedia static.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-21 15:46:06 +02:00
Ján Tomko
d99a89592d Revert "Switch from yajl to Jansson"
This reverts commit 9cf38263d0.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-08-13 15:50:01 +02:00
Ján Tomko
6f99de3148 Revert "m4: Introduce STABLE_ORDERING_JANSSON"
This reverts commit 4dd6054000.

Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.

https://bugzilla.redhat.com/show_bug.cgi?id=1614569

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-08-13 15:50:00 +02:00
Cole Robinson
f14f0836c5 tests: qemuhotplug: Fix segfault when XML loading fails
Some tests use the same VM state multiple times in a row. But if we
failed loading the VM XML, subsequent tests crash on the NULL def
pointer

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2018-07-26 10:13:00 -04:00
Ján Tomko
4dd6054000 m4: Introduce STABLE_ORDERING_JANSSON
Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.

Use this constant to guard tests that depend on stable ordering.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-07-18 17:54:18 +02:00
Ján Tomko
9cf38263d0 Switch from yajl to Jansson
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.

All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versions
https://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson

Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.

Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.

Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-07-18 17:54:18 +02:00
Michal Privoznik
5c81c342a7 qemu_hotplug: Allow asynchronous detach
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 13:08:52 +02:00
Shalini Chellathurai Saroja
f245a9791c qemu: introduce capability for virtual-css-bridge
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.

The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.

Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.

Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-05-14 11:26:15 -04:00
Ján Tomko
b3f75d9980 tests: replace references to yajl
Use "libvirt not compiled with JSON support" instead of mentioning
yajl specifically.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-05-11 13:28:35 +02:00
Peter Krempa
5a96b8d775 tests: qemumonitor: Allow testing schema for fake monitor interactions
Add infrastructure that will allow testing schema of the commands we
pass to the fake monitor object, so that we can make sure that it
actually does something.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-03-23 14:52:07 +01:00
Daniel P. Berrangé
6ea0ae9619 qemu: don't pass virConnectPtr around for secrets
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-19 11:11:47 +00:00
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Michal Privoznik
dc162adb90 qemuhotplugtest: Test user supplied alias
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-10-27 14:43:21 +02:00
Michal Privoznik
821b0b295d qemuhotplugtest: Load active XML
The point of this test is to load live XML and test hotplug. But
even though the XMLs we are parsing are live, the parsing is done
with VIR_DOMAIN_DEF_PARSE_INACTIVE flag.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-10-23 08:53:51 +02:00
Michal Privoznik
662140fa68 qemu: hot-unplug of watchdog
https://bugzilla.redhat.com/show_bug.cgi?id=1447169

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-10-05 14:23:20 +02:00
Michal Privoznik
361c8dc179 qemu: hot-plug of watchdog
https://bugzilla.redhat.com/show_bug.cgi?id=1447169

Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-10-05 14:23:20 +02:00
Michal Privoznik
f9bc41f740 qemuhotplugtest: Don't leak @vm
Some tests take already prepared domain from previous tests. In
this case, the domain is freed by the first test that doesn't
keep the domain. However, if there's no such test case domain is
leaked.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-08-07 10:44:06 +02:00
Peter Krempa
d65781bf06 tests: hotplug: Test disks with duplicate WWNs 2017-06-23 14:11:25 +02:00
Pavel Hrdina
8d04ea1661 tests/testutilsqemu: properly initialize qemu caps for tests
This removes the hacky extern global variable and modifies the
test code to properly create QEMU capabilities cache for QEMU
binaries used in our tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Peter Krempa
bd8f10c62a test: qemuhotplugtest: Add testing of individual vcpu hotplug
Test that the vcpu entity selection code works properly
2017-02-21 15:27:24 +01:00
Peter Krempa
5550dde150 tests: qemuhotplug: Don't free the monitor object as part of @vm
The test monitor should be freed separately so we need to remove the
pointer from the @vm object. This fixes a race condition crash in the
test introduced in commit a245abce43.
2017-02-02 16:46:43 +01:00
Peter Krempa
5ae7b0d8af tests: qemuhotplug: Fix memory leaks after cpu hotplug testing patches
testQemuHotplugCpuDataFree leaked @data always and
testQemuHotplugCpuPrepare leaked @prefix on success
2017-02-02 15:57:29 +01:00
Peter Krempa
7ab0080bed tests: hotplug: Test CPU hotplug with ppc64 data
Add a positive test and few negative tests.
2017-01-18 10:41:28 +01:00
Peter Krempa
69613157bb tests: hotplug: Add test data for legacy cpu hotplug
Test that the old approach generates correct commands.
2017-01-18 10:28:48 +01:00
Peter Krempa
a245abce43 tests: hotplug: Add test infrastructure for testing qemu CPU hotplug code
The cpu hotplug operation is rather complex so the testing code needs to
provide quite lot of data and monitor conversations to successfully test
it. The code mainly tests the selection of cpus according to the target
count request.
2017-01-18 10:06:01 +01:00
Laine Stump
9b0848d523 qemu: propagate virQEMUDriver object to qemuDomainDeviceCalculatePCIConnectFlags
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.

In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
2016-11-30 15:28:07 -05:00
Martin Kletzander
fb2d0cc633 qemu: Add support for hot/cold-(un)plug of shmem devices
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 17:36:50 +01:00
John Ferlan
8550e8585e qemu: Add secret object hotplug for TCP chardev TLS
https://bugzilla.redhat.com/show_bug.cgi?id=1300776

Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.

Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.

Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-26 07:27:48 -04:00
Michal Privoznik
c41b989112 virDomainDefParse{File,String}: Introduce @parseOpaque argument
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-26 16:50:12 +02:00
Martin Kletzander
a41d87f42f qemuhotplugtest: Only read result_filename if used
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-16 15:38:14 +02:00
Tomasz Flendrich
ed8f236491 qemuhotplugtest: Add tests for ccw devices
There's a plan to rework the address handling, so testcases
that verify hotplugging ccw devices will help in avoiding
regression.

In this commit, some files are duplicated because of the way
qemuhotplug.c calculates the expected xml filenames.
I plan on changing that to explicitly stating the basis domain
xml, the device xml, and the expected xml.
2016-07-25 10:51:08 +02:00
Tomasz Flendrich
b0b4a35c53 qemuhotplugtest: Move domain and device XMLs to different directories
This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices.  Thanks to that we can
test the domain XMLs in virschematest again.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-07-11 17:09:29 +02:00
Tomasz Flendrich
ec5dcf2a5d qemuhotplugtest: Move all XMLs to one directory
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway.  This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-07-11 17:09:29 +02:00
Marc Hartmayer
cdf4ae6ae3 tests: Add test cases for SCSI disk hot-plug with QEMU
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.

Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
2016-06-30 12:48:51 +02:00
Ján Tomko
8b04ce598d Add newDomain parameter to qemuDomainAssignAddresses
Pass 'true' if we are not dealing with a migration.
2016-06-23 07:45:31 +02:00
Martin Kletzander
326e5941cd qemu: Generate channel target paths on hotplug as well
Since commit 7140807917, qemu agent
channel cannot be plugged in because we won't generate its path
automatically.  Let's not only fix that, but also add tests for it so
next time it's checked for.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1322210

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-09 13:27:54 +02:00
Martin Kletzander
f371704708 qemuhotplugtest: Test live data
Until now, the only hot thing in this test was the name.  That's because
we set the id to '-1' before every test.  With this change, we test the
hotplug on live domains as the name suggests and as it should be.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-09 13:23:15 +02:00
Tomáš Ryšavý
753edcb3a4 Rename virtTestDifferenceFull to virTestDifferenceFull.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
401bb813bd Rename virtTestLoadFile to virTestLoadFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Ján Tomko
5572cd7f0e Deprecate QEMU_CAPS_DEVICE
We support qemu version 0.12.0+, which has it.
2016-05-23 10:38:45 +02:00
Ján Tomko
d0cc8b10c3 tests: do not overwrite return value when filling qemuCapsCache
In qemuHotplugCreateObjects, the ret variable was filled by
the value returned by qemuTestCapsCacheInsert.

If any of the functions after this assignment failed, we would still
return success.

Also adjust testCompareXMLToArgvHelper, where this change is just
cosmetic, because the value was overwritten right away.
2016-04-14 16:37:50 +02:00