The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'conflict' key in a virt_daemon_unit dictionary is not used when
generating systemd service and socket files. The comment associated
with the key claims the default is 'true', and a few build files
needlessly set it to 'true' when defining their virt_daemon_unit.
Remove the 'conflict' key and its use in the affect build files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`udevGetIntSysfsAttr` does not necessarily write to the third parameter,
even when it returns 0.
This was found by clang-tidy's
"clang-analyzer-core.UndefinedBinaryOperatorResult" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The current virPCIDeviceNew() signature, receiving 4 uints in sequence
(domain, bus, slot, function), is not neat.
We already have a way to represent a PCI address in virPCIDeviceAddress
that is used in the code. Aside from the test files, most of
virPCIDeviceNew() callers have access to a virPCIDeviceAddress reference,
but then we need to retrieve the 4 required uints (addr.domain, addr.bus,
addr.slot, addr.function) to satisfy virPCIDeviceNew(). The result is
that we have extra verbosity/boilerplate to retrieve an information that
is already available in virPCIDeviceAddress.
A better way is presented by virNVMEDeviceNew(), where the caller just
supplies a virPCIDeviceAddress pointer and the function handles the
details internally.
This patch changes virPCIDeviceNew() to receive a virPCIDeviceAddress
pointer instead of 4 uints.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
With commit 09364608b4 node_device: refactor address retrieval of node device
"if-else if" was replaced by "switch".
The contained break statement now is no longer in context of the for loop
but instead of the switch causing the legitimate grumpiness of coverity.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow mdev devices to be created on the matrix device.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use switch statements instead of if-else condition in the method
nodeDeviceFindAddressByName to retrieve address of a node device.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support for AP matrix device in libvirt node device driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#the-design
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Each AP card device can support upto 256 AP queues. AP queues are
also detected by udev, so add support for libvirt nodedev driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce support for the Adjunct Processor (AP) crypto card device.
Udev already detects the device, so add support for libvirt nodedev
driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The helper methods for getting integer properties ignore a missing
property setting its value to zero. This lack of error reporting
resulted in missing the regression handling hotplug of USB devices
with the vendor and model IDs getting set to zero silently.
The few callers which relied on this silent defaulting have been fixed,
so now we can report fatal errors immediately.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The access of DKD_MEDIA_AVAILABLE for floppy disks, is mistakenly
protected by a check for ID_CDROM_MEDIA, introduced in:
commit 10427db779
Author: Ján Tomko <jtomko@redhat.com>
Date: Fri Jun 3 16:10:21 2016 +0200
Only return two values in udevGetUintProperty
Thus the check of DKD_MEDIA_AVAILABLE never run. In practice this didn't
matter since this property is set by the DeviceKit-Disks daemon which
was only around for 3 Fedora releases before being killed off around
F13. Thus we can just remove this legacy property.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The udevProcessStorage method relies on udevGetIntProperty ignoring
errors about non-existant properties and instead setting the value to
zero. In theory when seeing ID_CDROM=1, you might expect that devices
which are not CDs will get ID_CDROM=0, but that's not what happens in
practice. Instead the property simply won't get set at all.
IOW, the code does not need to care about the value of the property,
merely whether it exists or not.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v6.3.0-rc1~67 I've made a switch: instead of listening on udev
events the nodedev driver started listening for kernel events.
This was because when a device changes its name (e.g. NICs) we
will get "move" event with DEVPATH_OLD property set, which we can
then use to remove the old device and thus keep our internal list
up to date. The switch to "kernel" source was made because if the
old NICs naming (eth0, eth1, ...) is enabled (e.g. via
net.ifnames=0 on the kernel cmd line) then udev overwrites the
property with the new name making our internal list go out of
sync. Interestingly, when the od NICs naming is not enabled then
the DEVPATH_OLD contains the correct value.
But as it turns out, "kernel" source might be missing some other
important properties, e.g. USB vendor/product IDs. Therefore,
switch back to "udev" source and wish the best of luck to users
using the old NICs naming.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1897625
Fixes: 9a13704818
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add detection of mdev_types capability to channel subsystem devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 53aec799fa introduced the function udevGetVDPACharDev(),
which scans a directory using virDirOpenIfExists() and
virDirRead(). It unfortunately forgets to close the DIR* when it is
finished with it. This patch fixes that omission.
Fixes: 53aec799fa
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Assume nobody runs current libvirt on kernels such as 2.6.26.
Kernel commit 9f9c9cbb60576a1518d0bf93fb8e499cffccf377 (released
in 3.8) mentions the new path and I believe it was added by:
commit 948af1f0bbc8526448e8cbe3f8d3bf211bdf5181
firmware: Basic dmi-sysfs support
(released in 2.6.39), but I cannot figure out how all that
kernel automagic works.
This reverts commit 4c81b0fdc5
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].
I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.
The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].
The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.
I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.
I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.
Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.
[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow vfio-ccw mdev devices to be created besides vfio-pci mdev devices
as well.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Make Direct Access Storage Devices (DASDs) available in the node_device driver.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:
+- css_0_0_003a
|
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Refactor out CCW address parsing for later reuse.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The term "ignored" is a better choice for the filtering performed
on devices from udev.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than using the AM_LDFLAGS_MOD_NOUNDEF options with the noinstall
library that will come out of libtool from
libvirt_driver_nodedev_impl_la, use it with the installed version
libvirt_driver_nodedev_la.
Broken-by-commit: c44bffb9
Fixes: https://ci.centos.org/job/libvirt-rpm/systems=libvirt-fedora-32/1155/
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to destroy mdev node devices via the mdevctl utility.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the nodedev driver, we need to link against a
non-loadable module. Similar to other loadable modules already in the
repository, create an _impl library that can be linked against the unit
tests and then create a loadable module from that.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With recent additions to the node device xml schema, an xml schema can
now describe a mdev device sufficiently for libvirt to create and start
the device using the mdevctl utility.
Note that some of the the configuration for a mediated device must be
passed to mdevctl as a JSON-formatted file. In order to avoid creating
and cleaning up temporary files, the JSON is instead fed to stdin and we
pass the filename /dev/stdin to mdevctl. While this may not be portable,
neither are mediated devices, so I don't believe it should cause any
problems.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to allow libvirt to create and start new mediated devices, we
need to be able to verify that the device has been started. In order to
do this, we'll need to save the UUID of newly-discovered devices within
the virNodeDevCapMdev structure. This allows us to search the device
list by UUID and verify whether the expected device has been started.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for creating mediated devices in libvirt, we will need to
wait for new mediated devices to be created as well. Refactor
nodeDeviceFindNewDevice() so that we can re-use the main logic from this
function to wait for different device types by passing a different
'find' function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently nodeDeviceCreateXML() and nodeDeviceDestroy() only support
NPIV HBAs, but we want to be able to create mdev devices as well. This
is a first step to enabling that support.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
