Support creating guest with USB host device in config file.
Currently libxl only supports xen PV guest, and only supports
specifying USB host device by 'bus number' and 'device number',
for example:
<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<address bus='1' device='3'/>
</source>
</hostdev>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Prefer firmwares specified via --with-loader-nvram configure
option. If none are specified, use the Xen-provided default
firmwares found in LIBXL_FIRMWARE_DIR.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Xen 4.6 introduced a new migration stream commonly referred to as
"migration V2". Xen 4.6 and newer always produce this new stream,
whereas Xen 4.5 and older always produce the legacy stream.
Support for migration stream V2 can be detected at build time with
LIBXL_HAVE_SRM_V2 from libxl.h. The legacy and V2 streams are not
compatible, but a V2 host can accept and convert a legacy stream.
Commit e7440656 changed the libxl driver to use the lowest libxl
API version possible (version 0x040200) to ensure the driver
builds against older Xen releases. The old 4.2 restore API does
not support specifying a stream version and assumes a legacy
stream, even if the incoming stream is migration V2. Thinking it
has been given a legacy stream, libxl will fail to convert an
incoming stream that is already V2, which causes the entire
restore operation to fail. Xen's libvirt-related OSSTest has been
failing since commit e7440656 landed in libvirt.git master. One
of the more recent failures can be seen here
http://lists.xenproject.org/archives/html/xen-devel/2016-05/msg00071.html
This patch changes the call to libxl_domain_create_restore() to
include the stream version if LIBXL_HAVE_SRM_V2 is defined. The
version field of the libxlSavefileHeader struct is also updated
to '2' when LIBXL_HAVE_SRM_V2 is defined, ensuring the stream
version in the header matches the actual stream version produced
by Xen. Along with bumping the libxl API requirement to 0x040400,
this patch fixes save/restore on a migration V2 Xen host.
Oddly, migration has never used the libxlSavefileHeader. It
handles passing configuration in the Begin and Prepare phases,
and then calls libxl directly to transfer domain state/memory
in the Perform phase. A subsequent patch will add stream
version handling in the Begin and Prepare phase handshaking,
which will fix the migration related OSSTest failures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.
Further details can be found in the following discussion thread
https://www.redhat.com/archives/libvir-list/2016-April/msg00178.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.
This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found. It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations. If xenlight.pc does not exist, the defines
are set to the current hardcoded paths. The capabilities'
<emulator> and <loader> elements are updated to use the paths.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Specifying an explicit path to pygrub (e.g. BINDIR "/pygrub") only works if
Xen and libvirt happen to be installed to the same prefix. A more flexible
approach is to simply specify "pygrub" which will cause libxl to use the
correct path which it knows (since it is built with the same prefix as pygrub).
This is particular problematic in the Debian packaging, since the Debian Xen
package relocates pygrub into a libexec dir, however I think this change makes
sense upstream.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces a function to detect whether the specified
emulator is QEMU_XEN or QEMU_XEN_TRADITIONAL. Detection is based on the
string "Options specific to the Xen version:" in '$qemu -help' output.
AFAIK, the only qemu containing that string in help output is the
old Xen fork (aka qemu-dm).
Note:
QEMU_XEN means a qemu that contains support for Xen.
QEMU_XEN_TRADITIONAL means Xen's old forked qemu 0.10.2
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxl interface for vcpu pinning is changing in Xen 4.5. Basically,
libxl_set_vcpuaffinity() now wants one more parameter. That is
representative of 'VCPU soft affinity', which libvirt does not use.
To mark such change, the macro LIBXL_HAVE_VCPUINFO_SOFT_AFFINITY is
defined. Use it as a gate and, if present, re-#define the calls from
the old to the new interface, to avoid breaking the build.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
This patch adds initial migration support to the libxl driver,
using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration
functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to test, change libxlBuildDomainConfig so
that it takes a virPortAllocatorPtr instead of the larger
libxlDriverPrivatePtr object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to unit test, change libxlBuildDomainConfig
so that it takes 'virDomainDefPtr' and 'libxl_ctx *' objects
as separate parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Due to some misunderstanding of requirements libxl places on timer
handling, I introduced the half-brained idea of maintaining a list
of timeouts that the driver could force to expire before freeing a
libxlDomainObjPrivate (and hence libxl_ctx). But testing all
the latest versions of Xen supported by the libxl driver (4.2.3,
4.3.1, 4.4.0 RC3), I see that libxl will handle this just fine and
there is no need to force expiration behind libxl's back. Indeed it
may be harmful to do so.
This patch removes the timer list, allowing libxl to handle cleanup
of its timer registrations.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libvirt_internal.h header was included by the internal.h header.
This made it painful to add new stuff to the header file that would
require some more specific types. Remove inclusion by internal.h and add
it to appropriate places manually.
As pointed out by the Xen folks [1], HVM nics should always be set
to type LIBXL_NIC_TYPE_VIF_IOEMU unless the user explicity requests
LIBXL_NIC_TYPE_VIF via model='netfront'. The current logic in
libxlMakeNic() only sets the nictype to LIBXL_NIC_TYPE_VIF_IOEMU if
a model is specified that is not 'netfront', which breaks PXE booting
configurations where no model is specified (i.e. use the hypervisor
default).
Reported-by: Stefan Bader <stefan.bader@canonical.com>
[1] https://www.redhat.com/archives/libvir-list/2013-December/msg01156.html
The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.
libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object. Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().
Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files. This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.
Commit d72ef888 introduced a bug in the libxl driver that will
segfault libvirtd if libxl reports an error message, e.g. when
attempting to initialize the driver on a non-Xen system. I
assumed it was valid to pass a NULL logger to libxl_ctx_alloc(),
but that is not the case since any errors associated with the ctx
that are emitted by libxl will dereference the logger and crash
libvirtd.
Errors associated with the libxl driver-wide ctx could be useful
for debugging anyway, so create a 'libxl-driver.log' to capture
these errors.
Currently, only one log file is created by the libxl driver, with
all output from libxl for all domains going to this one file.
Create a per-domain log file based on domain name, making sifting
through the logs a bit easier. This required deferring libxl_ctx
allocation until starting the domain, which is fine since the
ctx is not used when the domain is inactive.
Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
this patch introduce the console api in libxl driver for both pv and
hvm guest. and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).
Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
libxl uses some xenstore entries for hints in memory management
(especially when starting new domain). This includes dom0 memory limit
and Xen free memory margin, based on current system state. Entries are
created at first function usage, so force such call at daemon startup,
which most likely will be before any domain startup.
Also prevent automatic memory management if dom0_mem= option passed to
xen hypervisor - it is known to be incompatible with autoballoon.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The legacy xen toolstack will set pygrub as the bootloader if not
specified. For compatibility, do the same in the libxl driver
iff not using direct kernel boot.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
I've noticed that libxl can invoke timeout reregister/modify hooks
after returning from libxl_ctx_free. Explicitly remove the
timeouts before freeing the libxl ctx to avoid executing hooks on
stale objects.
The libxl driver is racy in it's interactions with libxl and libvirt's
event loop. The event loop can invoke callbacks after libxl has
deregistered the event, and possibly access freed data associated with
the event.
This patch fixes the race by converting libxlDomainObjPrivate to a
virObjectLockable, and locking it while executing libxl upcalls and
libvirt event loop callbacks.
Note that using the virDomainObj lock is not satisfactory since it may
be desirable to hold the virDomainObj lock even when libxl events such
as reading and writing to xenstore need processed.
